Products

These small, black plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the corre...

These plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the correct size hole ...

These plastic fir tree clips are perfect for holding panels or trims in place. The large diameter head is perfect for holding loose fitting panels ...

Self tapping POLYTOPS® screws, are popularly used in different applications, but particularly in securing vehicle numberplates. The coloured polyme...

Self tapping POLYTOPS® screws, are popularly used in different applications, but particularly in securing vehicle numberplates. The coloured polyme...

These clips are used on a wide range of VW cars and vans. The clips are distinctive because of the allen key head which gives the clips an industri...

These screws are common on Toyota cars and vans. The screws are often used on the wheel arch linings or splashguards. The screws have a captive was...

These are a spacer used to set the side skirt or sill trims off from the metal sill. They are used with a threaded bolt. Different models use diffe...

These are used on some of the older 3-Series and 5-Series BMW models such as the E36 and E39. They are a standard 5mm push pin plastic rivet. They ...

Widely used across the BMW range, these are very simple push pin plastic rivets that fit into an 8mm hole. BMW use them often on upholstery and car...

Fitted on several models, these are typically used on larger trim panels or upholstery such as bumpers, side skirts and boot linings. The clip is a...

This is a small kit of two BMW parts used to fit the floor mats in a number of older BMW models. The centre pin twists 90 degrees to lock in place ...

Used on older BMW cars, these small clip attach chrome and plastic strips and mouldings to the sides of the vehicle.

This is a standard 6mm plastic rivet used for a number of purposes on many different BMW vehicles. They can be found used on interior trims and boo...

These were originally fitted to the E36 BMW 3-series but are also now used on some more recent models. The screw is fitted to the rear of the headl...

These plugs fit into holes in the bodywork or in plastic side skirt or sill trims. Each clip has a small rubber o-ring seal around the stem.

The screw fit trim clips have an unusual hex head on the pin. They are fitted to some BMW models to retain the sill mouldings or side skirts. Other...

These are used on some 5-series and 6-series BMW cars to attach the side skirts or sill mouldings. BMW use several similar clips with different len...

These Torx headed bolts are used on the sideskirts or plastic sill covers fitted to some BMW models. There are different lengths depending on the m...

Widely used on BMW models, these spacers ensure that the sill mouldings or side skirts sit the correct distance from the metal bodywork. There are ...

A standard push fit plastic rivet which fits into a 7.5mm hole. The wide 22mm collar means the part is suitable for many different uses. It is used...

These are widely used by General Motors and fitted to just one Vauxhall car that we know of. They are widely used on the Vauxhall Antara for bumper...

These 6mm scrivets or screw fit plastic rivets have a Torx head and are used by Skoda on a number of different vehicles. The plastic clip is fitted...

Black metal body screw for Hyundai wheel arch liners and trim panels. This fastener is often used by Hyundai to fix front and rear wheel arch linin...

This M6 bolt is used to attach interior trim and linings on some SEAT models including the Arona and the Ibiza Mk5.

These small push fit plastic rivets are used to secure parts such as arch linings and windscreen cowls. The clip is push to fit but can be easily r...

A general purpose screw used on multiple Kia models for securing parts, trim and shields in position.

These black metal screws are used on several Renault models. They are normally found securing parts such as bumpers, wheel arch linings, engine bay...

identical specifications and equal in quality to the OE Toyota parts, these clips are a fraction of the cost. The clips are used to attach fabric i...

A simple push button clip used to retain the bonnet insulation and sound deadening fabric panels fitted to the underside of the bonnet.

These clips are 30mm wide and used on some older VW models. The more modern cars and vans use a smaller clip.

These clips are very widely used across the modern Volvo range. The clip is used to secure the under bonnet insulation in position. The clips pinch...

These simple trim clips are normally used to attach upholstered or fabric panels in position. In particular they are used by Mercedes to fasten the...

This black plastic fir tree clip is the type used by Subaru to attach the under bonnet insulation to most of their modern vehicles.

These fasteners are used to secure the upholstered sound deadening fitted to the underside of the bonnet. The clips are squeezed together to fit an...

Bonnet insulation is the sheet of fabric that is often fitted to the underside of the bonnet. On many Citroen cars and vans, this clip is used to s...

These are used on many different Toyota models to attach bonnet insulations, upholstery and trims. The plastic trim clip has an overall diameter of...

These small plastic button clips are used to fasten the bonnet insulation sheet to the underside of the bonnet. The plastic clips can become brittl...

Black plastic bonnet insulation clip for Lexus vehicles, used to secure bonnet insulation and hood soundproofing to the bonnet.

Used to secure the fabric sound insulation that is fitted to the underside of the bonnet on some Citroen cars and vans.

These clips squeeze together and then expand when released to hold firm. The clips are used on many modern Land Rover and Range Rover models to sec...

These barbed clips secure the fabric insulation panel that is mounted to the underside of the bonnet on some Peugeot cars and vans.

These 28mm round clips are used to attach the bonnet or hood insulation on many different models produced by Nissan and Infiniti. They can be fitte...

This small plastic clip is used on several Land Rover models to secure the insulation to the underside of the bonnet.

These pinch clips expand when fitted to hold the noise insulation in position on the underside of the bonnet. They are used on several modern Ford ...

These button clips are used to hold the sound insulation onto the underside of the bonnet.