Push Fit Plastic Fasteners

These are one of the best selling Honda equivalent clips. They are widely used across the Honda range as bumper clips, splashguard clips, side skir...

Very widely used clip by Nissan. Common on most models and used on bumpers, arch linings, radiator grilles, engine shields, windscreen cowls etc. T...

These clips are used across the Land Rover range to attach side skirts, radiator grilles, bumpers, undertrays and wheel arch linings. The clips are...

Extremely common Honda clip used on wheel arch linings and radiator grilles. The 8mm clip is a simple push rivet and replaces an 8mm screw rivet on...

These plastic rivets expand when the centre pin is pushed in. The clips are normally used for wheel arch linings but are also found on engine bay s...

These are used on several Honda models to attach bumpers, side skirts, radiator grilles and underbody shields. The clips are a simple 10mm push fit...

These clips are a high quality replacement identical to the OE parts. Nissan use these plastic push fit rivets for a variety of uses. They can be f...

These small, black 6mm clips have a wide collar and are common on interior trims and panels. They are often used on boot linings, upholstery, roof ...

Widely used by Ford for wheel arch linings and bumpers, these are a strong 9mm push fit plastic rivet. The centre pin pushes in to expand the clip ...

These clips push to fit and are easily released with a quarter turn of the head. For this reason they are often used for access panels around the e...

These clips are widely used by Ford across their range of cars and vans. They are used on interior and exterior trim. Some vehicles use them for do...

This 8mm clip is very quick and easy to install and remove. They are often used for panels where access may be required such as wheel arch linings,...

These clips are by far the most common clip we know of on Citroen cars and vans. It is fitted to at least 20 different models and is still in use o...

These clips have a metal spring loaded into the mechanism which helps to hold the clip firmly in place when they are fitted. The clips are very str...

A very widely used 5mm trim clip used by BMW on wheel arch flares, trims, linings and other various parts through the vehicle. They are a simple pu...

These 9mm push fit rivets are used on several Mitsubishi models including the Mitsubishi Lancer Evolution models 8, 9 and 10. They are used for att...

These are one of our best-selling Toyota clips. They are used on lots of different Toyota and Lexus models. Often used for engine bay shields, the ...

These 6mm trim clips are used rarely on Honda cars but are far more common on their motorcycles and ATVs. The clips are used for attaching fairings...

These 8mm push fit clips have a distinctive oval shaped head that pushes in to expand the pins and hold in place. The clips are used on some Ford m...

These are an extremely common plastic clip across the Vauxhall and Opel range. The clips are normally used on wheel arch linings / inner wing cover...

Common on several cars produced by Honda, these 8mm push fit clips are normally used to hold wheel arch linings and splashguards in place.

These 6mm plastic trim clips are a perfect replacement for the Land Rover clips used to attach the plastic wheel arch flare or spat on the Defende...

Used on a large number of Honda and Acura vehicles for attaching bumpers, side skirts, engine undertrays and splash shields. The clips fit into a 1...

These clips are by far the most common clip we see on Peugeot vehicles. It is fitted to at least 16 different models and is still in use on their n...

A standard push fit plastic rivet which fits into a 7.5mm hole. The wide 22mm collar means the part is suitable for many different uses. It is used...

These short clips are normally used for fastening bumpers, grilles, sill moulding trims and radiator covers in place. The clips have a mottled fini...

Widely used across the Mercedes-Benz range of cars and vans, these are very simple push pin plastic rivets. They are fitted to Mercedes upholstery ...

Very widely used by BMW, these are also fitted to a few models of Mini. They are typically used on trims such as wheel arch flares but also on engi...

These tiny push fit plastic rivets are used on interior trims, bumpers, radiator grilles and for some shields on Toyota vehicles. They are also an ...

These clips are a perfect fit for the standard holes in VW vans. They are longer than the original clips and so they allow for thicker panels to be...

These simple plastic rivet clips are used on several different Audi models and across the Volkswagen range. They fit into an 8mm hole and are used ...

A simple push fit plastic rivet that expands when the centre pin is pushed in. To remove the clip, push the centre pin through further and the clip...

These 10mm push fit rivets are used on many different Nissan cars. Typical use is on bumpers, mudguards, side skirts or wheel arch linings.

These heavy duty plastic rivets fit into an 8mm hole and are used by Ford on many of their cars and vans. The clips are used on a number of differe...

This plastic automotive rivet is extremely common across the Volvo range. The clip is used for a wide variety of purposes including for bumpers, si...

These larger plastic rivets are used to secure parts such as engine bay shields and the scuttle panel or windscreen cowl on several modern Jaguar c...

These are used on many different Toyota and Lexus models. The clips are normally used on engine bay shields or engine covers.

These are a very common clip used by a lot of different Japanese and European manufacturers. They fit into an 8mm hole and are used by Mitsubishi f...

Common on several Mazda models, these clips are normally used on bumpers undertrays, sill mouldings or other large panels and shields.

These clips are used across the VW range of cars but are also a perfect fit for the standard holes in VW vans. On the cars they are normally used f...

These black plastic expanding trim clips fit into a 7mm hole and the clip locks in position when the head is pushed down. The larger 25mm domed hea...

These clips are a perfect fit for the standard holes in VW vans. They are longer than the original clips and so they allow for thicker panels to be...

This is common clip across the Land Rover range and is used for a wide range of purposes. The 8mm plastic rivet is found on bumpers, wheel arch lin...

Increasingly commonly used by Renault to attach bumpers, grilles, wheel arches and sideskirts to vehicles. These are used on many modern vehicles a...

These clips are used on some models of the Vito, Metris and Sprinter. The clip is a standard 8mm push fit rivet that is used to hold panels and tri...

A very common expanding trim clip used by Ford, Vauxhall, Opel and Chrysler on a number of different vehicles. The clip is commonly used for the in...

These simple plastic rivet clips are used on several different Renault models. They are a strong, heavy-duty clip that fits into a 9mm hole and the...

These clips are a perfect fit for the standard holes in VW vans. They are longer than the original clips and so they allow for thicker panels to be...