Volvo Car Trim Clips, Fixings and Fasteners

These 8mm expanding plastic rivet clips are widely used by Volvo. The clip is to secure panels such as wheel arch linings, engine bay shields, boot...

These expanding plastic rivets fit into an 8mm hole. They are used on several Volvo models for attached the front bumper trims. Quick and easy to f...

This plastic automotive rivet is extremely common across the Volvo range. The clip is used for a wide variety of purposes including for bumpers, si...

Widely used across the Volvo range, these clips are essential if you regularly work with Volvo cars. They replace the yellow version (30653441) and...

The expanding plastic rivet clip fit into a 6mm diameter hole. The centre pin inserts to expand the clip and lock it into position. It is used on s...

These blind rivets are used on many modern Volvo cars to attach parts such as wheel arch linings and flares. The rivet is aluminium but has a black...

These self tapping screws are used by Volvo in a variety of different fitting locations but are most commonly used for securing the wheel arch lini...

These screw grommets or chimney nuts are unthreaded and used by Volvo to secure trim panels, bumpers and shields. The clip is common on many differ...

These parts are used on several Volvo vehicles to secure interior trim such as pillar covers, tailgate linings and entrance sill covers.

These push fit plastic rivets are used by Volvo on some models to secure wheel arch linings, door cards and other interior or exterior trims.

These bright orange trim clips are used on many different modern Volvo cars to attach and secure the wheel arch flare trim. This is the plastic tri...

These small white plastic trim clips are used on several Volvo models. They are used on the S80, V70, XC70 and XC90 amongst others. The fastener ha...

These white clips are used on several Volvo models to mount lower sill mouldings or the side skirts.

Angled white trim clips used to attach body side mouldings, side skirts and protective door trims. The clips are used on several different Volvo cars.

These clips are very widely used across the modern Volvo range. The clip is used to secure the under bonnet insulation in position. The clips pinch...

These are very common on Volvo cars and are normally used to attach the boot or tailgate lining. The clip pushes through the trim and clicks into t...

These red lock nuts are used to secure underbody shields and trim panels to some Volvo models.

Used on several Volvo cars to attach door card panels, these distinctive trim clips have a sprung head and rubber seal. The clip is fitted to trim ...

These simple push fit plastic rivets expand to lock in position when the centre pin is inserted. They are used by Volvo on several models. A common...

This two-part door card clip is very common on Volvo cars. The clip is used to attach the front or rear door trim card into place.

These clips are used to secure rubber seals or lightweight trim panels in position. They are typically used in door openings.

A simple 8mm plastic rivet used to attach wheel arch linings, engine bay covers and shields, side skirts, bumpers and sill trims.

These small black trim clips are used on several Volvo car models to attach interior trim panels. They are used as tailgate lining clips, pillar tr...

These are a distinctive little yellow and black trim clip. They are used by Volvo on some models of V40 V60 and S60 to attach side skirts or the pl...

These metals fasteners are typically used on older models to attach trim panels and door cards to the interior of Volvo cars

These yellow clips are used to attach the side skirts or sill covers to several modern Volvo cars.

These 8mm screw fit fasteners are used on some Volvo models for underbody panels and engine bay shields. The expands when the centre pin is pushed ...

These white clips with sealing washer are used to secure plastic trim to bodywork. Volvo use these on a number of vehicles. An example fitment is t...

This is a simple expanding plastic rivet. The clips fits into a 5.5mm hole and when the pin is inserted, the clip expands and locks in position.

These little white clips are slightly angled as they join the sill cover or side skirt moulding trims onto the body of several models of Volvo V40 ...

These are small push pin plastic rivets used on some Volvo cars and trucks. They are used for lightweight trim panels and covers.

These white plastic clips are used on a number of different Volvo cars including, but not limited to, the 440, S40 and V40. They are used in differ...

This clip is used at the lower end of the windscreen side trim. They are fitted to the Mk1 Volvo V60 and the Mk2 S60.

These distinctive clips are used on some Volvo models to attach the side skirts or sill trims. The clip fits into an 11mm hole and expands when the...

These push fit button clips are used by Volvo to secure upholstery and insulation in place.

These plastic inserts are used on several Volvo models to mount trim and parts to bodywork.