Push Fit Plastic Fasteners

Very widely used clip by Nissan. Common on most models and used on bumpers, arch linings, radiator grilles, engine shields, windscreen cowls etc. T...

Extremely common Honda clip used on wheel arch linings and radiator grilles. The 8mm clip is a simple push rivet and replaces an 8mm screw rivet on...

This is probably the most common Mazda clip we sell. These are fitted to almost all modern Mazda cars produced since 2010. The clips fit into an 8m...

These 8mm plastic clips are extremely common on modern Kia cars. The clips is fitted throughout the vehicles. Examples include the clip being used ...

These 8mm plastic rivets are used on some of the more modern Hyundai models such as the Santa Fe (2013 on). This type of clip is normally used to a...

These clips are widely used by Ford across their range of cars and vans. They are used on interior and exterior trim. Some vehicles use them for do...

This 8mm clip is very quick and easy to install and remove. They are often used for panels where access may be required such as wheel arch linings,...

These clips are a high quality replacement identical to the OE parts. Nissan use these plastic push fit rivets for a variety of uses. They can be f...

These clips are by far the most common clip we know of on Citroen cars and vans. It is fitted to at least 20 different models and is still in use o...

Widely used across the BMW range, these are very simple push pin plastic rivets that fit into an 8mm hole. BMW use them often on upholstery and car...

These 8mm push fit clips have a distinctive oval shaped head that pushes in to expand the pins and hold in place. The clips are used on some Ford m...

These are an extremely common plastic clip across the Vauxhall and Opel range. The clips are normally used on wheel arch linings / inner wing cover...

Widely used across the Mercedes-Benz range of cars and vans, these are very simple push pin plastic rivets. They are fitted to Mercedes upholstery ...

Common on several cars produced by Honda, these 8mm push fit clips are normally used to hold wheel arch linings and splashguards in place.

This is a very common clip used by Tesla throughout their vehicles. The clip fits into an 8mm hole and is used to secure parts such as bumpers, sil...

These clips are very popular on a large range of Vauxhall cars and vans. The clips are normally used on exterior trims and shields such as bumpers,...

These short clips are normally used for fastening bumpers, grilles, sill moulding trims and radiator covers in place. The clips have a mottled fini...

These clips are by far the most common clip we see on Peugeot vehicles. It is fitted to at least 16 different models and is still in use on their n...

These 8mm expanding plastic rivet clips are widely used by Volvo. The clip is to secure panels such as wheel arch linings, engine bay shields, boot...

Used on a number of different Honda cars, these clips are often fitted to wheel arch linings, engine shields, underbody panels, radiator grilles an...

These expanding plastic rivets fit into an 8mm hole. They are used on several Volvo models for attached the front bumper trims. Quick and easy to f...

These 8mm plastic rivets are used on several modern Mitsubishi vehicles. The clips are a simple expanding push fit clip. The clip goes into an 8mm ...

These simple expanding rivets are quick to fit and easy to replace. The parts fit into an 8mm hole and expand to lock in position when the centre p...

This plastic automotive rivet is extremely common across the Volvo range. The clip is used for a wide variety of purposes including for bumpers, si...

A simple push fit expanding plastic rivet used by tesla to secure some bumper, underbody and sill cover trim panels. The clip is a high quality aft...

These are a very common clip used by a lot of different Japanese and European manufacturers. They fit into an 8mm hole and are used by Mitsubishi f...

These clips are used on some models of the Vito, Metris and Sprinter. The clip is a standard 8mm push fit rivet that is used to hold panels and tri...

These are a simple push fit expanding plastic rivet. They are normally used by Japanese manufacturers but some Renault models produced in conjuncti...

This is common clip across the Land Rover range and is used for a wide range of purposes. The 8mm plastic rivet is found on bumpers, wheel arch lin...

A standard 8mm push fit plastic rivet used for attaching interior and exterior trim panels such as wheel arch linings, boot linings, engine bay shi...

Widely used on modern Nissan cars and vans, these clips are normally used for bumpers, grilles, undertrays and wheel arch liners. The clips are a s...

These are a standard push fit plastic rivet. The centre pin is pushed in, locks in place and holds the clip in position. These are typically used o...

These short clips are normally used for fastening bumpers, grilles, sill moulding trims and radiator covers in place. The clips have a mottled fini...

These push to fit expanding plastic rivets fit into an 8mm hole and are used on a wide range of Vauxhall / Opel vehicles. They are normally used on...

Fitted on several models, these are typically used on larger trim panels or upholstery such as bumpers, side skirts and boot linings. The clip is a...

Common on large trim panels and shields such as engine bay covers, radiator surrounds and wheel arch linings.

These 8mm clips are common as wheel arch lining, engine bay and bumper clips. Our parts are all produced to the exact same specifications as the or...

These clips have a 7.7mm diameter shaft and are used in the wheel arch lining on some Toyota models including the GT86. The clip is an expanding pu...

These simple expanding push fit rivets are fitted to several different modern Fiat cars. This includes the latest versions of the 500, Panda and Ti...

Very common across the Mazda range, this clip is used to fasten and secure a wide variety of parts. Uses include Mazda MX-5 sideskirt clips, CX-3 b...

Used on many different VW cars, these 8mm push pin rivets are normally used for attaching inner wing shields, undertrays or bumper shields.

These 8mm plastic push fit rivets are used by BMW on engine bay shields, radiator surrounds and some interior trim panels. The clip is a standard p...

These plastic fasteners are used on several Volkswagen cars and vans. The fastener is a standard 8mm push fit plastic rivet. These are normally use...

Fitted to the Model 3, these clips are used to attach some of the underbody shields to the vehicle. The clip pushes into an 8mm hole and expands to...

This plastic fastener fits into an 8mm diameter hole and expands to securely lock in place when the centre pin is inserted. They are used by VW on ...

These are a distinctive push fit black plastic rivet used on several Alfa Romeo vehicles. Example uses include as Giulietta windscreen cowl and arc...

These clips are used by Honda on a wide range of car and bike models and a wide number of parts. They are found on engine bay shields, radiator cow...

These 8mm plastic trim clips are typically used to attach wheel arch lining, bumpers, grilles and underbody shields. The clip is a plastic rivet th...