Contact Us
Mitsubishi Outlander Fixings Trim Clips and Fasteners -Mk2 (2006-2012)
Below you can find a list of some of the trim clips and fasteners that we keep in stock for the Mitsubishi Outlander Mk2 (2006-2012). We have tried to list the parts under subheadings which indicate the location they are used. Please note that there may be other clips used which we do not stock and which are not shown. If you need something specific for your Outlander and you can't find it, just let us know and we'll try to help or suggest an alternative.
Bonnet Insulation and Soundproofing
-
Bonnet Insulation Retaining Clip / Fastener, Mitsubishi MU001282
Mitsubishi bonnet insulation clips used to hold the fabric sound proofing panels in position on the underside of the bonnet. These clips fit into a...
View full details
Bonnet Rubber Weatherstrip
-
Bonnet Rubber Weatherstrip Seal Clips, Mitsubishi MU481027
These small brown clips are used on lots of Mitsubishi models. The clip is normally used to attach the rubber seals that run along the front and re...
View full details
Boot Carpet and Interior Lining
-
Mitsubishi Door Card & Interior Panel Trim Clips- MR550882
This interior trim panel clip is widely used by Japanese manufacturers including Mitsubishi. The clips are normally used on door cards but will als...
View full details -
8.5mm Screw Grommet Nut with Sealing Washer, Mitsubishi MU480034 MU480032
Standard lock nuts or screw grommets used for mounting parts or trim to metal bodywork. These clips push into a square 8.5mm hole in the bodywork. ...
View full details
Engine Heat Shield or Insulator Fastener
-
9mm Push Fit Plastic Clips for Bumpers, Undertray, Sills & Grille- Mitsubishi MR200300
These 9mm push fit rivets are used on several Mitsubishi models including the Mitsubishi Lancer Evolution models 8, 9 and 10. They are used for att...
View full details -
8mm Push Fit Trim Clip, Mitsubishi MU488006
These 8mm plastic rivets are used on several modern Mitsubishi vehicles. The clips are a simple expanding push fit clip. The clip goes into an 8mm ...
View full details -
8mm Plastic Rivet Trim Clips for Bumpers Splashguards- Mitsubishi MR328954
These are a very common clip used by a lot of different Japanese and European manufacturers. They fit into an 8mm hole and are used by Mitsubishi f...
View full details
Front Bumper and Trim Fastener
-
9mm Push Fit Plastic Clips for Bumpers, Undertray, Sills & Grille- Mitsubishi MR200300
These 9mm push fit rivets are used on several Mitsubishi models including the Mitsubishi Lancer Evolution models 8, 9 and 10. They are used for att...
View full details -
8mm Push Fit Trim Clip, Mitsubishi MU488006
These 8mm plastic rivets are used on several modern Mitsubishi vehicles. The clips are a simple expanding push fit clip. The clip goes into an 8mm ...
View full details -
8mm Plastic Rivet Trim Clips for Bumpers Splashguards- Mitsubishi MR328954
These are a very common clip used by a lot of different Japanese and European manufacturers. They fit into an 8mm hole and are used by Mitsubishi f...
View full details
Front Door Card
-
Mitsubishi Door Card & Interior Panel Trim Clips- MR550882
This interior trim panel clip is widely used by Japanese manufacturers including Mitsubishi. The clips are normally used on door cards but will als...
View full details -
Screw Mounting Grommet for 8.5x8.5mm Hole, Mitsubishi MS480003
Very widely used screw grommet that fits into a square hole measuring 8.5mm by 8.5mm. The clip is used by Mitsubishi to secure trim or parts to bod...
View full details
Front Door Weatherstrip
-
Front & Rear Door Rubber Weatherstrip Clips, Mitsubishi MU000255
These small white clips have a canoe shaped head that fits inside a rubber door seal. The clip then clicks into position on the door frame to secur...
View full details
Front Grille or Slam Panel
-
9mm Push Fit Plastic Clips for Bumpers, Undertray, Sills & Grille- Mitsubishi MR200300
These 9mm push fit rivets are used on several Mitsubishi models including the Mitsubishi Lancer Evolution models 8, 9 and 10. They are used for att...
View full details -
8mm Plastic Rivet Trim Clips for Bumpers, Splashguards & Wheelarch Liner- Mitsubishi MU000319 MU000705
A standard 8mm push fit plastic rivet that is used on several models made by Mitsubishi. These plastic fasteners are used on arch linings, mudguard...
View full details
Front Wheel Arch Lining and Mudguard
-
6mm Push Fit Plastic Trim Clips for Mitsubishi - MR288150, MR655523
Small 6mm push fit clips used by Mitsubishi on a wide range of models. These are one of the most common Mitsubishi clips we stock and have been fit...
View full details -
8mm Push Fit Trim Clip, Mitsubishi MU488006
These 8mm plastic rivets are used on several modern Mitsubishi vehicles. The clips are a simple expanding push fit clip. The clip goes into an 8mm ...
View full details -
Wheel Arch Lining, Bumper & Trim Panel Fasteners- Mitsubishi MB253964
Fitted to several Mitsubishi models, these clips are used for multiple purposes. They are found on wheel arch linings, bumpers, splashguards and in...
View full details -
8mm Plastic Rivet Trim Clips for Bumpers Splashguards- Mitsubishi MR328954
These are a very common clip used by a lot of different Japanese and European manufacturers. They fit into an 8mm hole and are used by Mitsubishi f...
View full details
Interior Pillar Trim
-
Mitsubishi Door Card & Interior Panel Trim Clips- MR550882
This interior trim panel clip is widely used by Japanese manufacturers including Mitsubishi. The clips are normally used on door cards but will als...
View full details
Interior Side Trim
-
6mm Push Fit Plastic Trim Clips for Mitsubishi - MR288150, MR655523
Small 6mm push fit clips used by Mitsubishi on a wide range of models. These are one of the most common Mitsubishi clips we stock and have been fit...
View full details
Rear Bumper and Trim Fastener
-
9mm Push Fit Plastic Clips for Bumpers, Undertray, Sills & Grille- Mitsubishi MR200300
These 9mm push fit rivets are used on several Mitsubishi models including the Mitsubishi Lancer Evolution models 8, 9 and 10. They are used for att...
View full details -
6mm Push Fit Plastic Trim Clips for Mitsubishi - MR288150, MR655523
Small 6mm push fit clips used by Mitsubishi on a wide range of models. These are one of the most common Mitsubishi clips we stock and have been fit...
View full details -
8mm Push Fit Trim Clip, Mitsubishi MU488006
These 8mm plastic rivets are used on several modern Mitsubishi vehicles. The clips are a simple expanding push fit clip. The clip goes into an 8mm ...
View full details
Rear Door Card
-
Mitsubishi Door Card & Interior Panel Trim Clips- MR550882
This interior trim panel clip is widely used by Japanese manufacturers including Mitsubishi. The clips are normally used on door cards but will als...
View full details
Rear Door Weatherstrip
-
Front & Rear Door Rubber Weatherstrip Clips, Mitsubishi MU000255
These small white clips have a canoe shaped head that fits inside a rubber door seal. The clip then clicks into position on the door frame to secur...
View full details
Rear Wheel Arch Lining and Mudguard
-
6mm Push Fit Plastic Trim Clips for Mitsubishi - MR288150, MR655523
Small 6mm push fit clips used by Mitsubishi on a wide range of models. These are one of the most common Mitsubishi clips we stock and have been fit...
View full details -
8mm Plastic Rivet Trim Clips for Bumpers Splashguards- Mitsubishi MR328954
These are a very common clip used by a lot of different Japanese and European manufacturers. They fit into an 8mm hole and are used by Mitsubishi f...
View full details -
Quick Release Plastic Trim Clip Rivet, Mitsubishi MR971764
These distinctive expanding plastic rivets fit into a square hole measuring 9mm x 9mm. The centre pin of the clip has a cross head and the clip is ...
View full details -
Plastic Grommet for Wheel arches, Splashguards, Inner Wing and Bumpers- Mitsubishi MR971765
These long plastic grommets are used to attach parts and trims to the metal bodywork on some Mitsubishi models. They are used on several models nor...
View full details
Side Skirt, Sill Moulding Cover Trim
-
8mm Push Fit Trim Clip, Mitsubishi MU488006
These 8mm plastic rivets are used on several modern Mitsubishi vehicles. The clips are a simple expanding push fit clip. The clip goes into an 8mm ...
View full details -
Body Moulding & Trim Panel Clips, Mitsubishi MU000588, MU000977
These short blue moulding clips are used on interior and exterior trim panels. The clips are used on several different models for parts such as pil...
View full details -
Mitsubishi Plastic Trim Clip- For Sill Mouldings, Side Skirts, Rocker Covers- MB361578
These are side skirt and body moulding clips fitted to a number of Mitsubishi cars. We always supply this clip with the foam sealing washer which i...
View full details
Tailgate Lining Clips and Boot Lid Lining
-
Mitsubishi Door Card & Interior Panel Trim Clips- MR550882
This interior trim panel clip is widely used by Japanese manufacturers including Mitsubishi. The clips are normally used on door cards but will als...
View full details
Windscreen Cowl or Scuttle Panel
-
4mm Fir Tree Clip for Air Inlet & Windscreen Cowling, Mitsubishi MR777365
These small black plastic trim clips are used on some Mitsubishi models to attach the plastic cowling that runs along the bottom of the windscreen.
