VVO

These locking star washers are suitable for attaching underbody noise and heat insulation. The corrosion resistant parts are used throughout the Vo...

These grey plastic retaining clips are used in the engine bay to secure sound insulation panels to the bodywork.

This interior trim panel clip is widely used by Subaru. The clips are normally used on door cards but will also be found on boot linings, pillar tr...

These small blue trim clips are used as Subaru door card clips, interior pillar clips and boot lining fasteners on a number of different Subaru mod...

These are fitted to a few different Subaru models and used to fasten bumpers, radiator grilles, side skirts and underbody shields. The clip is a si...

These simple black plastic push fit clips can be used on most lightweight trim panels. They are used by several different automotive manufacturers ...

One of the most common sump plug washers for Toyota cars and vans.

These are fitted to some Vauxhall models. They are prone to snapping and the sun visor being left loose at one end.

These rubber mounting clips are used around the sunroof on some models of the Megane and the Scenic. They perish over time which results in the roo...

These clips grip onto a threaded shaft and are used to hold carpet, trim or upholstery in place. The internal tube of the clip is barbed and fits o...

These 7mm push rivets are used on Suzuki motorbikes, ATVs and cars. The expanding rivets fit into a 7mm hole. The centre pin pushes in to expand th...

This interior trim panel clip is widely used by Japanese manufacturers. The clips are normally used on door cards but will also be found on boot li...

A simple, small and lightweight, 6mm plastic trim clip. These push fit rivets expand when they are fitted to hold tight and are normally used to se...

These green clips are used to help position and secure the tail light on some Toyota models including the Corolla (2018 onwards).

These clips are used to mount the rear tail lights on some models of the Mercedes-Benz Sprinter and the Volkswagen Crafter. The clips slide into mo...

These clips are used to mount the rear tail lights on some models of the Mercedes-Benz Sprinter and the Volkswagen Crafter. The clips slide into mo...

This clip is used on some older Mercedes models to attach interior and exterior trim panels. An example use is as boot lid trim panel clips on the ...

8mm Pillar trim clips used on a number of different Land Rover vehicles including the Freelander, Range Rover Sport (L320) and Evoque. The clip is ...

These parts are identical to Hyundai part number 9255236000. The clips are used to secure the plastic body moulding trim onto the outside of the re...

These parts are identical to Kia part number 9255236000. The clips are used to secure the plastic body moulding trim onto the outside of the rear d...

These white clips are normally used to attach exterior trim panels to the rear tailgate on some Honda cars. The clips are typically used on the str...

These green plastic clips look different before they are fitted as they have a washer that forms part of the mould. During installation, the washer...

This style of interior trim clip is increasingly common on modern cars. Each one has a metal spring clip built into the plastic housing to hold it ...

Simple plastic trim clips that are hidden when fitted. These parts are used on the Jeep Renegade to secure some of the trim panels on the tailgate....

These wide green plastic trim clips are used to attach the tailgate lining on the Mercedes-Benz C-Class W205.

These white hidden trim clips are used on many BMW cars . They are almost always used to fit the plastic lining to the rear tailgate or boot hatch....

These small fir tree clips are fitted to some models of Tesla and used to secure trim. One example is to attach the trim inside the frunk (front lu...

These rear seat bench clips often fail on the Tesla Model 3 and Tesla Model Y. The clips can be replaced to prevent rattles on the rear bench seats.

These sprung head push fit trim clips are used on all versions of the Tesla Model 3 to attach the door cards. The clips push in and expand when fit...

Plastic nuts used by BMW to secure loose trim items such as wheel arch linings and under body shields.

This part is often used by VW on wheel arch linings, bumpers and wings. The plastic nut has a 22mm collar.

These threaded nuts are typically used around the rear bumpers to secure brackets and mouldings.

These Torx head bolts are used on several Citroen models for securing bumpers and other major body parts.

These Torx head bolts are used on several Peugeot models for securing bumpers and other major body parts.

These M5 screws are common across the Audi range and often used on wheel arch linings or for interior trim panels.

These M5 screws are common across the VW range and often used on wheel arch linings, bumpers or for interior components and trim panels.

This is a common screw used on body parts and trim such as wheel arch linings and bumpers.

These Torx screws are used all over modern Skoda vehicles. The parts are used for underbody shields, bumpers, arch linings, splashguards, interior ...

These torx headed screws are extremely common exterior trim fasteners on modern Skoda vehicles. The screws are used to secure parts such as wheel a...

These bolts are often used to attach the door lock mechanism to Mercedes cars, trucks and van.

These screws are very common on wheel arch linings, bumpers and other shields.

These Torx headed screws are used to secure a range of parts onto modern Ford vehicles. They are common on engine undertrays, wheel arch linings, b...

This screw is used on many different cars and throughout the bodywork. The clips are used for a wide range of purposes such as underbody shields, b...

Common screw used across the VAG group for items such as wheel arch linings, undertrays and interior trims and panels.