vvo

These distinctive expanding plastic rivets fit into a square hole measuring 9mm x 9mm. The centre pin of the clip has a cross head and the clip is ...

These small fasteners clip into position to secure the radiator grille on some models of the Pajero, Shogun and L200. The clips are high quality af...

These small plastic clips are used to fit trims around the front grille of the Mk1 Citroen Jumpy or Dispatch.

A common, heavy duty plastic fastener used on Mercedes vehicles to secure the top of the radiator into position. These plastic clips have a head wh...

These small white plastic clips are used on the side mouldings and body trims fitted to some Land Rover models. In particular they are fitted to th...

These blue clips are used to attach the plastic trims that run around the edges of the wheel arches on the MK1 Range Rover Evoque.

Used to fit exterior body mouldings on several different Range Rover models. The clips are normally used on side skirts, sill covers or plastic doo...

These clips are used on some models of the Vito, Metris and Sprinter. The clip is a standard 8mm push fit rivet that is used to hold panels and tri...

These are positioning grommets that fit into the metal bodywork of the car. The tail lights have lugs on them that then fit into these grommets.

These plastic discs are fitted onto threaded studs that protrude on the inside of the wheel arches or underbody. The clip pushes onto the stud and ...

These plastic discs are fitted onto threaded studs that protrude on the inside of the wheel arches or underbody. The clip pushes onto the stud and ...

These high quality aftermarket plastic trim clips are designed to replace VW part 1K0807300. They are identical and used by VW to secure parts such...

These distinctive trim clips are used on some SEAT models for securing exterior trim such as bumpers.

These distinctive and rectangular headed bolts are used as Vauxhall Corsa wheel arch flare fasteners. They are one of several parts used to attach ...

These small red clips are used on some Renault models to attach the wheel arch trims that run around the edge of the arch. They are distinctive due...

A common and distinctive red plastic expanding nut used on the Land Rover Defender and many of the more modern Land Rover vehicles. The clip can be...

Nylon cable tie that is removable and fits into an 8mm hole. These parts are used by many manufacturers and a good generic part ideal for routing c...

These simple plastic rivet clips are used on several different Renault models. They are a strong, heavy-duty clip that fits into a 9mm hole and the...

This is a Renault door card clip that is common across their range. The clip is a two piece fastener but they are supplied and fitted pre-assembled...

A two-part clip including an 8mm retainer that fits into the bodywork of the vehicle and a press stud. The stud has a mottled patterned head and lo...

Common two-piece clip that often separates when disassembling trims or door cards. The clips are supplied and fitted in their assembled state but d...

These are an easy to recognise trim clip fitted in plenty of modern Renault cars. They are normally used for door card trims but also some interior...

These chunky grey fasteners are used to position and secure the rear bumper on some models of the Renault Kadjar.

These white, oval shaped body moulding clips are used by Renault to fit side strips to several of their models. The clips are easily damaged if the...

These are widely used across a range of Renault cars and vans. The plastic fasteners are normally used to attach panels such as bumper covers, whee...

These large clips have a head diameter of 35mm. They are a slightly flexible plastic that is used to retain the wheel arch linings and splash shiel...

These clips are widely used on modern BMW cars. The clip is a receiver for other parts and is normally used for underbody shields and trims such as...

These small parts are used with twist lock or barbed fasteners that typically hide access panels on BMW cars. This might include a panel in the boo...

This part is used with the twist lock bolt (FCP0755) that holds the two covers in place on the front and rear bumpers. These covers hide either the...

These screws are used to attach a wide variety of parts on Mercedes cars, vans and trucks. The wide washers are for holding panels in position. Typ...

These distinctive clips attach roof lining panels, interior pillar covers and other trim panels onto many different Volkswagen models. They are a c...

These black plastic screws are used on some Fiat models to fill the holes in the roof where the roof bars or moulding trims are secured. The clips ...

These small black plastic fasteners are used on several Mini cars to attach the roof trim. Each clip includes a chunky foam sealing washer.

These plastic clips are used on older VW cars such as the Mk2 Golf and Jetta. The clips are used to attach roof trims in the rain gutters.

One of the door seal clips used by Honda on a few different models. These clips are fairly universal so long as the hole size in the bodywork is co...

Small black plastic clips used to attach the rubber door seals on some models of the Citroen C5. These clips are still current and so may be fitted...

These distinctive looking car clips are used on door rubber seals, boot seals and engine bay seals. The plastic clip has a long and thin collar whi...

These clips are used with other plastic trim clips. This hard rubber grommet fits into a hole in the bodywork. A separate clip is inserted and the ...

These clips are used with other plastic trim clips. This hard rubber grommet fits into a hole in the bodywork. A separate clip is inserted and the ...

These rubber inserts are used with other fasteners and provide a seal and firm hold into the bodywork. This part is widely used across the Volkswag...

These rubberised inserts are normally used with part number FCP-0400 to attach parts such as side skirts, door mouldings and wheel arch flares.

These arrow head clips are used to attach rubber weatherstrips in place on parts such as the bonnet and bulkhead.

These are used for attaching rubber seals to apertures on several Honda cars. They are normally used on the rubber seals at the front or rear of th...