VVO

This type of unthreaded plastic nut is normally used on a coarsely threaded stud attached to the bodywork. The nut cuts a thread as it is tightened...

Plastic unthreaded nut used for various purposes and widely across the BMW range. They are not threaded inside and so normally tighten onto a coars...

These fasteners are an unthreaded nut used for various purposes within the Mercedes-Benz range. They are not threaded inside and so normally tighte...

Plastic unthreaded nut used for various purposes and widely across the Mini range. They are not threaded inside and so normally tighten onto a coar...

This is a universal use black plastic rivet suitable for a 5.5mm or 6mm hole. The clip can be used for a wide range of purposes such as attaching i...

These black 5.5mm expanding plastic rivets are used by Vauxhall for bumpers, bonnet insulation, shields and trim panels. These clips are an afterma...

These fasteners are typically used around the engine bay on radiator and engine covers or shields.

These distinctive clips are used on some Volvo models to attach the side skirts or sill trims. The clip fits into an 11mm hole and expands when the...

This 8mm clip is very quick and easy to install and remove. They are often used for panels where access may be required such as wheel arch linings,...

These plastic rivets expand when the centre pin is pushed in. The clips are normally used for wheel arch linings but are also found on engine bay s...

This positioning pin is used for fitting the rear bumpers to the Nissan Pathfinder, Armada and the Infiniti QX56. The pin is distinctive looking an...

These nuts have an unthreaded internal diameter of 3.9mm. The parts are normally fitted onto a coarsely threaded stud and the thread is cut into th...

This clip is very widely used across the BMW range. It is used for a lot of different purposes. Some of the parts this clip is used with include si...

Fitting into a 6.5mm hole, these clips are used on several BMW models. The clip is a simple push pin plastic rivet that is used for bumpers, wheel ...

Plastic screw fit rivets that expand when the centre pin is pushed or screwed in. This clip has a mottled patterned head and is used on several old...

Plastic screw fit rivets that expand when the centre pin is pushed or screwed in. This clip has a mottled patterned head and is used on several old...

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

These plastic nuts are mounted in the metal bodywork and used to secure trim panels and covers. They are used on lots of different Mini models.

These bodywork screw grommets are found on old and new VW cars and commercial vehicles. Example uses include Mk2 Golf wheel arch lining clips, Mk3 ...

These plastic screw grommets are used around the wheel arch lining and for wheel arch trims on a number of Nissan and Infiniti cars. They are used ...

This is a standard screw grommet used on several Honda models. The clips is nearly always used on the front or rear door panels. The grommet fits i...

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

These screw grommets are widely used by BMW and fitted to many different models. Typical uses includes front or rear bumpers and tailgate trims. Th...

A standard plastic screw grommet used for mounting body panels, trim panels and parts to bodywork. This is a high quality alternative to the genuin...

A common screw grommet fitted to many Audi vehicles. The clip is used throughout and example uses are wheel arch linings, pillar trims, door cards,...

Used on several Fiat models for mounting parts such as wheel arch linings, engine bay trims, tailgate trims and interior panels.

A standard grommet used on a very wide range of Honda vehicles. The grommets are used all over the vehicle from interior panels and the dashboard t...

These are a standard screw grommet used to attach parts or trims onto metal bodywork without having to screw directly into the metal.

These are widely used across the Citroen and Peugeot range. The clip is oval shaped and is used all over the vehicles. The shape of the clip allows...

A small white lokut nut used on many different Peugeot cars and commercial vehicles. This type of plastic clip is used to position parts, panels an...

These standard screw grommets fit into a square hole measuring 8x8mm. The parts are normally used to attach trim and parts to metal panels without ...

These small white plastic screw grommets are widely used on modern Ford cars and vans. The clip is commonly used around the wheel arches for the mu...

Used on several VW cars and vans, these are also a good universal screw grommet for mounting and joining parts and panels.

This is a standard plastic spire clip that will normally be used for securing parts to bodywork. They're commonly used to attach plastic bumper cov...

These clips are used around the edges of the wheel arch. They mount onto the lip of the wing and then the plastic wheel arch liner is attached when...

These clips are extremely common across the Toyota range. The clips are normally used around the edges of the wheel arch. They mount onto the wing ...

These fasteners are used to join trim panels such as wheel arch linings to the metal wing.

This black nut fits on a barbed or threaded stud. The part has a wide collar and is normally used to fasten insulation, heat shields and upholstery...

These clips are used the attach various trims to several different BMW models. The clip has a large head and is screwed into position to hold under...

These push fit plastic automotive clips are used by Toyota and Lexus on a number of different models. The clip fits into a 7mm hole and has a mottl...

Each of these clips has a rubber sealed that is moulded around the plastic body. They are typically used for mounting exterior plastic mouldings su...

These clips are used on the Land Rover Discovery mk2 to attach rear bumper trims but they are also used on the Freelander mk1 to attach the tailgat...