VVO

Self tapping POLYTOPS® screws, are popularly used in different applications, but particularly in securing vehicle numberplates. The coloured polyme...

These light green trim panel clips are used on many different Fiat cars. They are normally used for interior trim parts such as door cards, pillar ...

These screw grommets or chimney nuts are unthreaded and used by Volvo to secure trim panels, bumpers and shields. The clip is common on many differ...

These small plastic fir tree clips are perfect for holding panels or trims in place. They fit into a fairly small 7mm hole but the wide 24mm diamet...

These grey plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality fastener and when used in the correct s...

These grey plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality fastener from a top European supplier a...

These plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the correct size hole ...

These small, grey plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the correc...

Used on several BMW models to hold the rubber seals in place around the door openings.

These plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the correct size hole ...

These plastic fir tree clips are perfect for holding panels or trims in place. The large diameter head is perfect for holding loose fitting panels ...

These are very common on Volvo cars and are normally used to attach the boot or tailgate lining. The clip pushes through the trim and clicks into t...

These distinctive green and white plastic trim clips are used on Audi models such as the Q5 and Q7. The clips are fitted to the underside of trim p...

These clips are used on many different cars and commercial vehicles within the Volkswagen group including models produced by Audi, SEAT, Skoda and ...

These light grey trim clips are used to fasten fabric insulation and carpet in place on several Vauxhall cars and vans. They are normally found aro...

These are very solid fir tree clips that fit into an 11mm hole. The clips are strong and perfect for a more heavy duty role.

These white body and trim panel clips are used on some SEAT models to attach trim panels such as door cards, interior side trims and also to secure...

These white trim panel clips are used on some Honda models, normally to attach door sill cover mouldings. They have also been used to attach trim p...

Small 6mm screw fit plastic fasteners also known as scrivets. These clips are used to fasten interior and exterior trim panels such as pillar trims...

Common on several cars produced by Honda, these 8mm push fit clips are normally used to hold wheel arch linings and splashguards in place.

These are a white plastic screw grommet that normally is used to connect the bumper corners to the wings. Seen in white or black, the grommet fits ...

These are a specific clip used on some versions of the mk7 Civic. They often get broken in a slight impact and so need replacing to realign the bum...

These are used on the rear door of some models of the Honda CRV. They are used to attach the plastic exterior trim or garnish that contains the num...

These are used on lots of different Honda bikes but also on some car models. The clips are fitted to fascias and trims and then snap into place to ...

This clips have two part numbers from Honda. 75315STKA01 and 75315S9A004. The clips are used on exterior body and door mouldings.

These standard fir tree clips are fitted to several older Honda models. The clips are used to attach interior trims and upholstery.

These are widely used on older Honda models. The clips are used to attach many different interior trim panels from door cards to boot linings and s...

Commonly found on pillar trims and other interior trim panels, this plastic clip is widely used throughout the Honda range.

Screw fit plastic clips for interior trim panels and linings that used on several Honda cars.

These are a small yellow clip used on some Honda models to attach weatherstrips or rubber door seals. The clip is unusual and not used on many models.

These clips have a distinctive patterned head and a foam sealing washer. They are used on some Honda cars normally to attach the triangular trim pi...

Common Honda bonnet insulation fastener used across many of their range of cars.

A standard 8mm push fit plastic rivet used for attaching interior and exterior trim panels such as wheel arch linings, boot linings, engine bay shi...

These clips are used on some Honda models, normally to attach the bumper corner to the wing. It is a simple screw grommet that allows parts to be m...

These are a simple clip to push in and lock in place trims, covers and seals.

These are distinctive clips used to fasten bonnet or hood insulation panels. They simply push through and click into place to secure the fabric ins...

Used to attach side skirts or plastic sill covers on some Honda models.

An 8mm screw fit plastic rivet with a 20mm collar. These are fitted to some Honda cars on interior and exterior trim panels such as bumpers, wheel ...

These are a high quality alternative to the genuine Honda parts. These green rubber seal clips are used to attach the rubber door seals or weathers...

Used on a few different models, these attach the trims that run along the roof edge. They are normally known as drip mouldings or rain channel trim...

These round headed, plastic button clips push through the rubber seals at the front and rear of the bonnet to fix them in place. They are used on s...

This small screw fit rivet is used in a 6mm hole. It is used on several Honda vehicles including the DA5 and DA7 Integra where is used to attach th...

These are used on a few different Honda models. In particular they are the clips used to attach the side skirts to the EP3 Civic Type-R. They are d...

These yellow v-shaped trim fasteners are used to attach the wheel arch trim in place on some models of Civic, CRV and HRV. The clip is likely to sn...

These simple push fit clips are normally used to attach the windscreen cowl that runs along the bottom of the windscreen and covers the windscreen ...

These push fit plastic rivets with foam washers, are used on some Honda vehicles to attach the windscreen cowl. This is the piece of plastic trim t...

These blue body moulding trim clips have a distinctive head with one straight side. They are used by Honda to attach windscreen cowling in place. T...

Kia and Hyundai use many different clips in their range that look almost identical to these. This can make it hard to identify the correct parts. T...