vvo

This parts are common on several models of the Yaris to secure the undertray and bumper. They are also used on some Lexus models and are interchang...

Used on a large number of Honda and Acura vehicles for attaching bumpers, side skirts, engine undertrays and splash shields. The clips fit into a 1...

These 10mm push fit plastic rivets are used on several Honda models normally to attach radiator grilles and bumpers.

These are one of the best selling Honda equivalent clips. They are widely used across the Honda range as bumper clips, splashguard clips, side skir...

These are strong, screw fit plastic clips used to fasten bumpers and other large trim panels in place on some Honda cars.

These threaded nylon nuts are used on some Skoda models to affix rear bumper covers, trims or impact bars.

These are short length push fit plastic rivets used on several Honda cars. The clips are normally used for securing thin panels such as arch lining...

These wide collared parts are used by Honda to secure the underbody trim covers, shields and insulation onto many of their modern vehicles. The cli...

These plastic trim clips are used by Mazda, normally on exterior parts such as bumpers, grilles or radiator shields and guide.

A good generic 10mm push fit plastic clip. The centre pin is pushed in to expand the clip and lock in place. These are suitable for a wide range of...

These are extremely common on most modern Honda cars. It's a standard 10mm push fit plastic rivet that is used to fasten larger trim panels and shi...

A simple push-to-fit expanding plastic rivet that lock in position in a 10mm hole. These fasteners are used by Subaru for bumpers, wheel arch linin...

These 10mm push pull plastic rivets are used to secure various plastic panels and trims on the Tesla Model S and Model 3. The clip fits into a 10mm...

This expanding plastic rivet is used on the Toyota GT-86 to attach parts such as the bumpers, under trays, wheel arches and some interior trim pane...

These 10mm push fit rivets are used on many different Nissan cars. Typical use is on bumpers, mudguards, side skirts or wheel arch linings.

These plastic rivets are used to secure front and rear bumpers, radiator surrounds and engine bay trims. They fit into a 10mm hole.

These chunky plastic trim clips are used by Toyota on models such as the Mk3 RAV4 to attach the front grille. The clip expands when the centre in i...

These are strong screw fit plastic clips that would normally be used on bumpers or side skirts. The part number used by General Motors is 94530624 ...

These screw fit black plastic rivets are used on some Jaguar models. Typical fitments include for bumpers, arch linings or interior trim panels.

These are standard screw grommets used for mounting trims and parts into position on the bodywork. These fit into a 10mm x 10mm square hole in the ...

These cable ties are increasingly used on vehicles and for vehicle conversions. The edge clips are ideal on panels where mounting holes are unavail...

These are good universal screw grommet that fits into a square hole measuring 11mm x 11mm. Fiat have used this part on several of their vehicles to...

These chunky screw fit plastic trim clips are used on some Jaguar models to attach air deflectors and shields around the engine bay and radiator. T...

These large screw fit plastic fastenings fit into a 12mm hole. They are used on some vehicles to attach underbody shields and other large plastic t...

Each fitted with a rubber grommet, these clips are perfect, high quality replacement to the OE parts. The clips are used to attach the plastic moul...

these brackets fit onto the sills of various models and allow the side skirts and sill trims to be positioned correctly. They are not used on all m...

These grey plastic trim clips are used to attach the Peugeot 308 side mouldings that run on the outside of the doors along the side of the vehicle....

These small plastic rivets fit into a 4.5mm diameter hole. The clip expands when the centre pin is inserted to securely lock in position. They are ...

These are small push fit rivets used for lightweight trim. The fastener fits into a 4.5mm hole and expands when the centre pin is inserted.

A plastic expanding rivet that is used on some Skoda vehicle to secure trim and mouldings.

These cable ties are used to secure wiring looms and washer hose on vehicles across the Volkswagen group range. The clip fits onto the edge of a b...

These small black plastic trim clips are used on some Mitsubishi models to attach the plastic cowling that runs along the bottom of the windscreen.

This is a pack of 10 high quality replacement trim clips for the Nissan Qashqai (2014 on) rear door seals. The rubber door seal is at the top of th...

Used on several Ford cars and commercial vehicles, these clips are normally used as wheel arch lining clips, interior trim panel clips or upholster...

This is a simple expanding plastic rivet. The clips fits into a 5.5mm hole and when the pin is inserted, the clip expands and locks in position.

These button clips are used to secure the rubber seals in place that run around door apertures and bonnets on some Nissan vehicles.

These fit into a 5mm diameter hole and have a head diameter of 18.4mm. The black plastic trim clips are used on several BMW models such as the E70 ...

These small fir tree clips are used on some BMW models for securing lightweight pieces such as rubber weatherstrip seal corners or interior trim pa...

This small fir tree clip is common on Mercedes vehicles. They are most often used on the trim or seal that runs on the top of the front wing within...

This is a very common part used on a wide range of vehicles all related to the Volkswagen Group. The clip is used for a variety of purposes from at...

This is a very common part used on a wide range of vehicles all related to the Volkswagen Group. The clip is used for a variety of purposes from at...

This is a very common part used on a wide range of vehicles all related to the Volkswagen Group. The clip is used for a variety of purposes from at...

This is a very common part used on a wide range of vehicles all related to the Volkswagen Group. The clip is used for a variety of purposes from at...

This distinctive screw fit fastener has an oval collar. The clip is normally used for windscreen cowls or scuttle panel trims. It is used on modes ...

These button clips are used to secure the rubber seals in place that run around door apertures and bonnets on some Subaru vehicles.