Toyota Car Trim Clips, Fixings and Fasteners

These clips are pushed into square holes and click in place to hold wheel arch linings, sill trims and engine shields. The clips can also be used a...

These are blue interior or exterior trim panel clips are used to attach door cards, side panels and boot lining trims on a number of Toyota models.

These plastic rivets are used to secure front and rear bumpers, radiator surrounds and engine bay trims. They fit into a 10mm hole.

These clips are used on several older Toyota cars including the MR2. They are typically used to attach door card trim panels but are sometimes also...

These are not common on Toyota cars but are found on some models, normally around the radiator or engine bay. The clips are used to secure trim pan...

These screw grommets fit into a square 9x9mm hole. The part is used with a screw to fasten plastic bumpers, spoilers, headlamps and mudguards onto ...

These small, 7mm black plastic trim clips are used by Toyota on a number of different cars. The clips are a standard push-fit plastic rivet style f...

A 9mm clip used on a number of Toyota and Lexus vehicles including the MR2, Supra, Celica and LS400. The clip fits into a 9mm hole and is recognisa...

This distinctive clip is one of many different coloured body moulding clips used by Toyota on models such as the Land Cruiser Prado and the Lexus G...

These chunky plastic trim clips are used by Toyota on models such as the Mk3 RAV4 to attach the front grille. The clip expands when the centre in i...

These distinctive clips are used to hold and secure the splash guard liner around the wheel arch.

This clip is very popular across the Toyota range. It is most often used on interior trim panels such as door cards, boot linings and pillar covers...

These orange snap fit fascia clips are used to secure trim and covers onto the dashboard and centre console on many modern Toyota cars and vans. Th...

These clips are used to attach various trim and protective panels in and around the engine bay and underside of the car. They are quite distinctive...

These yellow moulding trim clips are used by Toyota to secure exterior trims such as wheel arch flares and side bump strips. For example, this fast...

Common on door card panels, pillar trims and headlinings. These clips are a good universal clip and were widely used by Toyota. The clips fit into ...

These distinctive trim clips are used on bumpers, shields and undertrays. They fit into a 9mm hole and have a wide 33mm collar.

These expanding rivets push in to lock in place but can be easily released with a quarter turn of the screw head. This makes them ideal for access ...

These are used on many different models for bonnet release cables, fuel hatch release cables, looms and door locks. The clip takes a maximum diamet...

This is one of many different clips used by Toyota to affix the side moulding trim onto models such as the Land Cruiser Prado. The clips are colour...

Small plastic fasteners used on some Toyota vehicles to secure exterior trim mouldings such as side skirts and sill covers. Each yellow fastener in...

This wide collared 7mm screw fit clip is used on some Toyota models to secure panel in position. This can include seat backs and bases, boot lining...

This clip fits into a 7mm hole and has a large 30mm diameter head. The head of the clip is gloss black so gives a prestige look when used on bonnet...

This is one of many different clips used by Toyota to affix the side moulding trim onto models such as the Land Cruiser Prado. The clips are colour...

A simple push button clip used to retain the bonnet insulation and sound deadening fabric panels fitted to the underside of the bonnet.

These large and distinctive expanding plastic rivets are used to secure the side skirt or sill cover mouldings onto the Toyota Avensis Mk3, The cli...

These small clips push into a 7mm hole and the fin lock the clip in place. They are typically used by Toyota for small, light trim panels such as a...

One of the most common sump plug washers for Toyota cars and vans.

These plastic grommets are used on a number of Lexus and Toyota cars to attach the front bumper corners to the wings. The grommet is pushed through...

This distinctive clip is one of many different coloured body moulding clips used by Toyota on models such as the Land Cruiser Prado and the Lexus G...

These plastic and steel rivets are used on some Toyota and Lexus models to secure the plastic trim moulding that runs alongside the windscreen. The...

These simple button clips are used to secure the plastic trim seal at the rear of the front wings where they meet to door hinges. They often need r...

A large plastic rivet that fits into a 22mm diameter hole. The push fit fastener is used on models including the Toyota Prius and the Lexus CT200H ...

These yellow plastic trim clips are often used to secure exterior plastic trims to Toyota vehicles. Examples uses include fasteners tailgate mouldi...

These fasteners are typically used around the engine bay on radiator and engine covers or shields.

These large headed button clips are normally used on insulation or upholstery panels. The clip fits into a 7mm diameter circular hole in the bodywo...

These two part clips are used to attach interior trim panels in some Toyota cars and van. The clip will normally come apart on disassembly and shou...

These short clips are normally used for fastening bumpers, grilles, sill moulding trims and radiator covers in place. They may also be used for eng...

This Restagraf fitting kit provides a full set of OE quality fasteners for replacing the front bumper on the Toyota Proace (2019 on). This kit is t...