Toyota Car Trim Clips, Fixings and Fasteners

These are not common on Toyota cars but are found on some models, normally around the radiator or engine bay. The clips are used to secure trim pan...

These clips are pushed into square holes and click in place to hold wheel arch linings, sill trims and engine shields. The clips can also be used a...

These screw grommets fit into a square 9x9mm hole. The part is used with a screw to fasten plastic bumpers, spoilers, headlamps and mudguards onto ...

One of many clips used for attaching the side mouldings and trims on various models of the Toyota Land Cruiser. There are a lot of different clips ...

These are often found in boot linings, dashboard covers, and access panels around the interior or engine bay of the vehicle. They fit a 7mm hole an...

This is common clip used by Toyota on many different models of car. The clip is used for a wide range of fittings including cowls, shields, fender ...

A 9mm clip used on a number of Toyota and Lexus vehicles including the MR2, Supra, Celica and LS400. The clip fits into a 9mm hole and is recognisa...

These clips are used to attach various trim and protective panels in and around the engine bay and underside of the car. They are quite distinctive...

These black plastic clips are normally used to secure wheel arch liners or underbody shields. The parts fit onto studs mounted on the body.

These are used on many different models for bonnet release cables, fuel hatch release cables, looms and door locks. The clip takes a maximum diamet...

A simple push button clip used to retain the bonnet insulation and sound deadening fabric panels fitted to the underside of the bonnet.

These large and distinctive expanding plastic rivets are used to secure the side skirt or sill cover mouldings onto the Toyota Avensis Mk3, The cli...

These plastic and steel rivets are used on some Toyota and Lexus models to secure the plastic trim moulding that runs alongside the windscreen. The...

These are used on the Toyota Corolla, Supra and Celica for interior panels such as the boot ling as well for the radiator grille cover, bumpers and...

These expanding rivets push in to lock in place but can be easily released with a quarter turn of the screw head. This makes them ideal for access ...

This wide collared 7mm screw fit clip is used on some Toyota models to secure panel in position. This can include seat backs and bases, boot lining...

This is one of many different clips used by Toyota to affix the side moulding trim onto models such as the Land Cruiser Prado. The clips are colour...

These clips fit onto the underside of many modern Toyota vehicles- normally on the sidekirts or sill covers.

These small clips push into a 7mm hole and the fin lock the clip in place. They are typically used by Toyota for small, light trim panels such as a...

This clip fits into a 7mm hole and has a large 30mm diameter head. The head of the clip is gloss black so gives a prestige look when used on bonnet...

These simple button clips are used to secure the plastic trim seal at the rear of the front wings where they meet to door hinges. They often need r...

These 9mm push fit plastic rivets are used for securing trim such as the windscreen cowl in position.

A large plastic rivet that fits into a 22mm diameter hole. The push fit fastener is used on models including the Toyota Prius and the Lexus CT200H ...

These short clips are normally used for fastening bumpers, grilles, sill moulding trims and radiator covers in place. They may also be used for eng...

These push fit clips are used on the Toyota GT86 to secure the front wheel arch linings and splashguards.

These small plastic clips fit onto threaded or barbed studs in the wheel arch. The clip push down over the stud and scures the arch lining in posit...

These large headed button clips are normally used on insulation or upholstery panels. The clip fits into a 7mm diameter circular hole in the bodywo...

These plastic grommets are used on a number of Lexus and Toyota cars to attach the front bumper corners to the wings. The grommet is pushed through...

These fasteners are typically used around the engine bay on radiator and engine covers or shields.

These aluminium blind rivets are coated black as they are normally used in visible locations such as the wheel arch linings and wheel arch flares. ...

These tiny black plastic fasteners are used to attach and secure lightweight trims and rubber seals. They are used on many different Toyota models.

This two piece clip used used on some Toyota models including some versions of the MR2. The clip is used to secure the exterior side air intakes on...

These distinctive push fit clips are normally used on spoilers, undertrays and under body strakes.