Toyota Car Trim Clips, Fixings and Fasteners

This clip pushes into an 8mm square hole and is normally used to hold flexible panels such as wheel arch linings and splash guards. The centre hole...

These are one of our best-selling Toyota clips. They are used on lots of different Toyota and Lexus models. Often used for engine bay shields, the ...

These tiny push fit plastic rivets are used on interior trims, bumpers, radiator grilles and for some shields on Toyota vehicles. They are also an ...

These are common undertray, splash shield and wheel arch lining clips used on several modern Toyota models. The are used on the latest RAV4 as well...

These screws are common on Toyota cars and vans. The screws are often used on the wheel arch linings or splashguards. The screws have a captive was...

There are several Toyota clips that all look quite similar to these. It's important to check the measurements and part number before you order. Eac...

These are used on many different Toyota and Lexus models. The clips are normally used on engine bay shields or engine covers.

These plastic nuts are used to join the edges of two panels. They are commonly used by Toyota to join the wheel arch lining to the edge of the whee...

These plastic rivets fit into a 7mm hole. They are used on some Toyota vehicle to attach parts such as bumpers, wheel arch linings and underbody sh...

This expanding plastic rivet is used on the Toyota GT-86 to attach parts such as the bumpers, under trays, wheel arches and some interior trim pane...

These clips fit into a 7mm hole. They simply push into the hole and expand to lock in position when the centre pin is inserted. This clip is used b...

These clips have a 7.7mm diameter shaft and are used in the wheel arch lining on some Toyota models including the GT86. The clip is an expanding pu...

Plastic clip that is used to retain shields and linings normally around the wheel arches. The clips can also be used as screw grommets and so are o...

These are fitted to many different Toyota cars and vans. They are used on bumpers, side skirts, radiator grilles, spoilers, undertrays and engine s...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Toyota models. They are used on several models normall...

These are a 7mm standard push fit rivet that expands and locks when the centre pin is pushed in. They are used on several different Toyota models i...

This small screw fit plastic rivet fits into a 5mm hole and is used on many different Toyota cars. The clip is normally used for small trim panels ...

These are used on many Toyota models to secure small or lightweight trim panels such as windscreen cowls, pillar trim covers, boot lining panels an...

These small expanding plastic fasteners are used to accurately secure lightweight trim panels or corner pieces. They are used on parts such as bump...

Most often used by Toyota on wheel arch linings and shields, these clips are just a simple plastic rivet that can be used on all sorts of trims ins...

These plastic rivets are a replacement for Toyota part number 90467-09227. The clip has a grey centre pin and they are normally used on the undersi...

This parts are common on several models of the Yaris to secure the undertray and bumper. They are also used on some Lexus models and are interchang...

These small clips are used along the inner edge of the bonnet tip or base to attach the rubber seal. They are used on a number of different Toyota ...

A standard push fit expanding plastic rivet which can be used for interior trim panels, dashboards, boot linings etc. The clip is used on many diff...

These are used on a number of different Toyota cars from the Auris to the Avensis and up the Lexus LFA. They can be used in many different location...

These little clips are used to attach the rubber seal strip that runs along the top of the radiator grille near the bonnet catch. The strip reduces...

These 7mm plastic rivets are used on some modern Toyota models. In particular they are the Toyota RAV4 front grill clips (Mk4 2013-2018). The clips...

This clip is normally used by Subaru but is also fitted to the Toyota GT86 around the rear bumper. The clip is a simple push fit plastic rivet that...

These heavy duty fasteners are typically used for larger trim panels such as bumpers, under body shields, side skirts and wheel arch linings. The c...

identical specifications and equal in quality to the OE Toyota parts, these clips are a fraction of the cost. The clips are used to attach fabric i...

This fir tree style clip has a distinctive head with a cut out portion. The clip is used on a number of different Lexus and Toyota vehicles on upho...

These push fit plastic fasteners are used on a few different Toyota and Lexus models. They are typically used to attach side skirts, bumpers and wh...

This type of clip is normally used on shields such as wheel arch liners, bumper trims, side skirts and mudguards.

One of many clips used for attaching the side mouldings and trims on various models of the Toyota Land Cruiser. There are a lot of different clips ...

These clips are pushed into square holes and click in place to hold wheel arch linings, sill trims and engine shields. The clips can also be used a...

These plastic rivets are used to secure front and rear bumpers, radiator surrounds and engine bay trims. They fit into a 10mm hole.

These are not common on Toyota cars but are found on some models, normally around the radiator or engine bay. The clips are used to secure trim pan...

These screw grommets fit into a square 9x9mm hole. The part is used with a screw to fasten plastic bumpers, spoilers, headlamps and mudguards onto ...

These small, 7mm black plastic trim clips are used by Toyota on a number of different cars. The clips are a standard push-fit plastic rivet style f...

A 9mm clip used on a number of Toyota and Lexus vehicles including the MR2, Supra, Celica and LS400. The clip fits into a 9mm hole and is recognisa...

These chunky plastic trim clips are used by Toyota on models such as the Mk3 RAV4 to attach the front grille. The clip expands when the centre in i...

These distinctive clips are used to hold and secure the splash guard liner around the wheel arch.

These clips are used to attach various trim and protective panels in and around the engine bay and underside of the car. They are quite distinctive...

These distinctive trim clips are used on bumpers, shields and undertrays. They fit into a 9mm hole and have a wide 33mm collar.

These expanding rivets push in to lock in place but can be easily released with a quarter turn of the screw head. This makes them ideal for access ...

These are used on many different models for bonnet release cables, fuel hatch release cables, looms and door locks. The clip takes a maximum diamet...

This is one of many different clips used by Toyota to affix the side moulding trim onto models such as the Land Cruiser Prado. The clips are colour...