Push Fit Plastic Fasteners

A simple push pin plastic trim rivet that is used on some older Peugeot models. Typical usage includes as wheel arch lining clips and bumper fasten...

These simple push fit plastic rivets are normally used by SEAT on front grilles, radiator covers and bumpers. The clips fit into a 6mm hole and exp...

These simple plastic expanding rivets fit into an 8mm hole and then expand when the centre pin is inserted to lock the clips in place. They are use...

These black 5.5mm expanding plastic rivets are used by Vauxhall for bumpers, bonnet insulation, shields and trim panels. These clips are an afterma...

These small, 6mm plastic pin rivets are used on some older BMW cars to secure the interior trim panels in position.

These push fit clips are used on the Toyota GT86 to secure the front wheel arch linings and splashguards.

These small clips are easy to fit and easy to release. A quarter turn of the head is enough to release the centre pin and allow them to be removed....

These are a standard 8mm push fit plastic trim clip used on several Nissan models. The Nissan equivalent part number is 63848-01G00 or 01553-08541

Often used as interior trim panel clips, these are also used to fit the radiator grille and air intake covers on some Peugeot car models. They are ...

These 8mm push fit plastic rivets are used in several locations on Polestar models. Common usage includes for the front luggage compartment or frun...

These small push fit plastic rivets are used to secure parts such as arch linings and windscreen cowls. The clip is push to fit but can be easily r...

These black plastic clips are used on the early models of the Smart Fortwo for some of the trim panels in the boot.

A simple 8mm expanding plastic rivet. Smart uses this clip on some models to fasten underbody trim, wheel arch linings and side skirts.

This is an expanding push fit clip used on several Mini cars for attaching sound deadening panels, upholstery and carpet to various models within t...

These distinctive plastic rivets are used on a wide variety of VW, Audi and SEAT cars. The clip is used for many different purposes from engine bay...

These clips are simple barbed fasteners that are used on a range of vehicles to secure trim such as splash guards, wheel arch linings, boot linings...

Used on several different VW models, this clip is also utilised on the rear bumper of the Audi TT Mk1. The clip fits into an 8mm hole and expands t...

These push fit plastic rivets with foam washers, are used on some Honda vehicles to attach the windscreen cowl. This is the piece of plastic trim t...

These plastic trim clips are fitted to the arch linings of some Subaru vehicles including the BRZ and some models of Forester.

These small trim clips are used for interior trim panels. The clip pushes in to fit but can easily released with a quarter turn on the screw head.

These distinctive clips are used on some Volvo models to attach the side skirts or sill trims. The clip fits into an 11mm hole and expands when the...

These are used on the Peugeot 4007. The clips are typically used to attach bumpers, fit wheel arch linings, splashguards and underbody shields. The...

Fitted to the Peugeot 107 and 108, these clips are normally used by Toyota. These cars were designed and manufactured with Toyota and so some parts...

These grey, push fit plastic fasteners expand when inserted into a hole. The clips are used on some modern Mini vehicles to attach trim panels.

High quality push fit expanding plastic rivet clips used on some of the new Citroen models that are produced in conjunction with Mitsubishi. These ...

These push fit expanding rivets are used on a number of Honda vehicles to secure the scuttle panel below the windscreen. The clips fit into an 8mm ...

These rivets are widely used on the Fiat 124 Spyder (2017-2020). The clips are used on parts such as the engine undertray, rear bumper and boot lin...

These two part push fit clips are made from metal and plastic. The clips are typically used on parts such as wheel arch linings or for other trim p...

These short stemmed 8mm plastic rivets are used on the Smart Forfour to secure some interior trim panels.

These 9mm push fit plastic clips were used by Toyota on some models to attach bumpers and grilles.

This plastic push fit clip is a standard black rivet style fastener. They fit into an 8mm hole and are a good universal fastener that can be used f...

These push fit expanding plastic trim clips are used on several modern Mercedes cars. Example uses include on windscreen cowls, front grille and en...

These clips fit into a 6.5mm hole and are used on some Smart models to hold parts such as bumpers and cover panels.

These push fit plastic automotive clips are used by Toyota and Lexus on a number of different models. The clip fits into a 7mm hole and has a mottl...

These clips are used across the Volkswagen Group. They are used on several Seat cars for attaching large trim panels such as underbody shields, arc...

These plastic fasteners are typically used to hold interior trim and carpet. The black clip is simple to fit and expands to hold securely in an 8mm...

This plastic trim clip is distinctive in that the push pin is grey and the collar is black. Toyota use these for parts such as underbody shields, b...

Black plastic push-fit fastener on some Porsche models. This clip secures elements such as the front luggage compartment (frunk) lining, boot carpe...

These are a heavy duty fastener used to secure the side skirts or sill moulding trim onto some Volkswagen vehicles including the Polo. The clip pus...

These small fasteners are used for attaching small trim panels in position. Typical uses are for bumper corners, grilles, fascia covers and interio...