Peugeot Car & Van Trim Clips, Fixings & Fasteners

These clips are by far the most common clip we see on Peugeot vehicles. It is fitted to at least 16 different models and is still in use on their n...

These clips push into the trim in the tailgate or boot hatch. The centre pin is inserted and that causes the clip to expand and lock in position. T...

These Torx head bolts are used on several Peugeot models for securing bumpers and other major body parts.

These clips are used on some of the Peugeot and Citroen cars that are produced with Toyota. They are used as front and rear Peugeot 107 bumper clip...

These are one of our bestselling clips that's used on Peugeot cars and vans. At our last count these were used on at least 20 different Peugeot veh...

These long plastic grommets are used to attach parts and trims to the metal bodywork on some Peugeot models. They are used on several models normal...

These clips are fitted to many Peugeot cars and vans. The bonnet prop rod is held in this clip when it is folded down and not in use. They are quit...

These are used on several models. The clip is fitted onto the interior of the tailgate. The centre pin pushes in to lock the clip in place. The par...

These are a small black plastic clip used to attach rubber seals around the door openings on some Peugeot models. The fasteners have a flat head wh...

This simple screw fit rivet fits into a 5mm hole and is used to fasten bumpers and other trim panels in place on some models of Peugeot cars.

These small plastic clips are used on several Peugeot cars to hold rubber sealing strips in place around the entrances in the vehicle body. The hea...

These are more commonly found on Toyota cars but are also used by Peugeot on vehicles that they have produced in collaboration with the Japanese ca...

These clips are fitted to some Peugeot and Citroen models that are produced with Mitsubishi parts. It is a simple 9mm push fit plastic rivet that i...

An oval screw grommet widely used across the Peugeot range and across their vehicles. The grommet is used for mounting trims, panels and parts into...

These 6.5mm fir tree clips used by Peugeot and Citroen have an 18mm head. The black clip is used in lots of different places depending on the car. ...

These are a very distinctive clip used by Peugeot. The push fit clips have a cross-shaped centre pin which pushes in to engage the fastener. Peugeo...

These 6mm plastic fir tree clips are used to fasten bonnet insulation, wheel arch linings, splashguards and windscreen cowling into position on a l...

Peugeot use these parts on some of their interior trims and also on bumpers. The clip has a distinctive Torx head.

Commonly used by Peugeot and Citroen for wheel arch linings, splashguards and bumpers, this clip is also found on windscreen cowls, engine undertra...

This clip is used on some Peugeot cars and vans to secure trim panels and upholstery. Typical uses include boot carpet lining, bonnet soundproofing...

Locking clips that are used throughout Peugeot vehicles to secure parts such as floor mats, boot linings and sound insulation. The clips are distin...

These plastic discs are fitted onto threaded studs that protrude on the inside of the wheel arches or underbody. The clip pushes onto the stud and ...

One Peugeot's bonnet insulation clips, this particular size is used on the 1007, 206, 207 and some of the Partner vans. The clip is a simple button...

These plastic trim clips are used on several models in the Peugeot range. They fit into a 6mm hole and are used for securing lightweight plastic tr...

These grommets are used to align and secure parts such as door cards, tailgate linings, pillar covering trim and sill garnish trims.

These are simple expanding rivets. Normal uses include bumpers, side skirts, wheel arch linings. A specific example is that Peugeot use these as Pe...

Used across the Peugeot range of cars and vans, these clips fit carpets, insulation and linings in place. They are used on many different models an...

These barbed clips secure the fabric insulation panel that is mounted to the underside of the bonnet on some Peugeot cars and vans.

These clips are normally used for attaching exterior trim panels to the bodywork. This includes side moulding strips, tailgate trims, protective mo...

Used to attach windscreen cowls, heat shield insulation and interior boot and carpet linings, these black trim clips are normally found on older Pe...

These are the exterior moulding clips for some models of the Peugeot 406 and 106. They are used to hold the exterior plastic trims that run the len...

These are used on the Peugeot 4007. The clips are typically used to attach bumpers, fit wheel arch linings, splashguards and underbody shields. The...

These clips are simple barbed fasteners that are used on a range of vehicles to secure trim such as splash guards, wheel arch linings, boot linings...

These simple button clips are used to secure the fabric insulation fitted to the underside of the bonnet on the Peugeot 107 and 108. They simply pu...

A simple push pin plastic trim rivet that is used on some older Peugeot models. Typical usage includes as wheel arch lining clips and bumper fasten...

Fitted to the Peugeot 107 and 108, these clips are normally used by Toyota. These cars were designed and manufactured with Toyota and so some parts...

Often used as interior trim panel clips, these are also used to fit the radiator grille and air intake covers on some Peugeot car models. They are ...

This clip holds the bonnet support rod in place when the bonnet is closed. The clip keeps the rod in position and stops it rattling or being damage...

These simple plastic expanding rivets fit into an 8mm hole and then expand when the centre pin is inserted to lock the clips in place. They are use...

A good universal interior trim clip, this part is used by Peugeot, Citroen, Fiat and Alfa Romeo. The clip fits into a 9mm hole and includes a pre-f...

These two part push fit clips are made from metal and plastic. The clips are typically used on parts such as wheel arch linings or for other trim p...

This clip is used on some of the Peugeot models such as the 4007. On that model, it is used to fasten the wheel arch liners or splash guards in place.