New Products

This clip fits into an 8mm hole and is used to secure parts such as undertrays, bumpers and wheel arch linings.

These plastic washers are fitted to the underside of several modern Skoda vehicles where heat shields are held on by metal star washers. The plasti...

These plastic spacers / washers are used with metal clamps to secure underbody shields into position. They are very common across the VW group.

These push fit plastic rivets are used on models such as the Jaguar XF to secure the windscreen cowl at the bottom of the windshield.

These plastic spacers / washers are used with metal clamps to secure underbody shields into position. They are very common across the VW group.

This is a plastic insert clip with a rubber grommet. The clip is used on some Tesla models such as the Model 3. They are used in and about the fron...

These distinctive plastic fasteners are used to secure the windscreen cowl in position on many Subaru models.

These chunky, push fit plastic rivets fit into a 15mm hole. They are used by Suzuki to hold sill covers or side skirts into position on vehicles su...

These small plastic clips fit onto threaded or barbed studs in the wheel arch. The clip push down over the stud and scures the arch lining in posit...

Widely used plastic trim clip for parts such as windscreen cowls, tailgate linings, sill covers, bumpers & dashboard.

These 8mm push fit plastic rivets are used on some models such as the Nissan Leaf and Note. The clip fits into an 8mm hole and expands to secure in...

These are a heavy duty fastener used to secure the side skirts or sill moulding trim onto some Volkswagen vehicles including the Polo. The clip pus...

This plastic nut is used on some Vauxhall models such as the Crossland X. The nut is fitted inside the wheel arch and holds the liner or splashguar...

Small plastic washers that push onto a threaded or barbed stud to retain the material behind. The clips are typically used for items such as insula...

These clips are used on many modern Volvo cars to secure the lower front bumper.

These clips fit into the tailgate either side of the rear window. The parcel shelf string attaches to this clip and then the shelf lifts when the b...

These clips fit into the tailgate either side of the rear window. The parcel shelf string attaches to this clip and then the shelf lifts when the b...

These push in clips are fitted to the tailgate. The parcel shelf string attaches to these clips so that when the boot is opened, the parcel shelf l...

These clips are used to route the bonnet release cable on most modern Honda cars. The clips close around the cable and then clip into a 7mm hole.

These metal clips are used on the inside door pull handle to attach the trim cover. They are used on most modern VW cars.

A very common screw / bolt used by BMW to secure parts such as bumpers, undertrays and arch linings.

These 30mm long bolts are used by VW on the front bumpers and radiator support of several models.

These push fit clips go into a 6.5mm hole. They have rectangular shaped collar. The clips are used by Volvo to secure the windscreen cowl or scuttl...

These small screws have a soft plastic sealing washer pre-fitted. The screws are used for securing exterior trim such as door mouldings, sill cover...

These are a very common screw for the interior of Audi cars.

This is an extremely common screw on the interiors of Skoda cars. They are typically used for boot linings, door cards, sill covers, pillars and ta...

These are a very common interior trim panel screw used on a wide range of SEAT cars. Typical uses include around the doors, centre console, dashboa...

This a very common screw used across the VW group. They are normally used on interior trim around the dashboard, centre console, boot and doors. Th...

This small screw is used on interior trim panels around the centre console as well as for the charging point surround on most electric VW vehicles.

This is a common fastener used around the dashboard and centre console of many modern VW cars and vans. The screw is an M5 thread.

This small M5 screw is used to secure dashboard parts and also the front bumper on several different Skoda cars.

This bolt is common on interior panels around the boot and tailgate as well as on the bumper of some models.

This M6 bolt is used to attach interior trim and linings on some SEAT models including the Arona and the Ibiza Mk5.

These screws each have an 18mm captive washer. The screws are normally used for securing parts such as arch liners, splashguards or undertrays.

A metal screw with 18mm washer that is used for securing parts such as engine undertrays, splashguards and wheel arch liners.

These angled screw mounts are used to mount door panels on several BMW models.

These small plastic inserts are used attach small trim pieces and vehicle badges. They are used on a wide range of BMW cars for the front and rear ...

These arrow head clips are used to attach rubber weatherstrips in place on parts such as the bonnet and bulkhead.