Honda Car Trim Clips, Fixings & Fasteners
Filters
10mm Honda Bumper, Wheel Arch Lining, Undertray and Sill Clips- 91503-SZ3-003
These are one of the best selling Honda equivalent clips. They are widely used across the Honda range as bumper clips, splashguard clips, side skir...
View full details8mm Plastic Clips for Honda Grille, Wheel Arch Lining, & Bumper Clips 91512-SX0-003
Extremely common Honda clip used on wheel arch linings and radiator grilles. The 8mm clip is a simple push rivet and replaces an 8mm screw rivet on...
View full detailsLong Stemmed Bumper, Side Skirt, Undertray Clips- Honda 91506S9A003
These are used on several Honda models to attach bumpers, side skirts, radiator grilles and underbody shields. The clips are a simple 10mm push fit...
View full detailsWheel Arch Trim Clips / Flare Clips- Honda 91513-SMG-E11
These small clips are used on the front and rear wheel arch of the 8th generation Honda Civic (2005-2011) and the 3rd generation Honda CR-V (2007-2...
View full detailsShort-Stemmed Bumper, Side Skirt & Undertray Clips- Honda 91505S9A003
These clips have a metal spring loaded into the mechanism which helps to hold the clip firmly in place when they are fitted. The clips are very str...
View full details6mm Push Pin Plastic Rivet Fender & Trim Clips- Honda 90116-SP0-003
These 6mm trim clips are used rarely on Honda cars but are far more common on their motorcycles and ATVs. The clips are used for attaching fairings...
View full detailsHonda 8mm Plastic Wheel Arch Lining & Splashguard Clips 91501-S04-003
Common on several cars produced by Honda, these 8mm push fit clips are normally used to hold wheel arch linings and splashguards in place.
10mm Bumper Clips, Sideskirt Clips and Engine Undertray Clips- Honda 91503-SZ5-003
Used on a large number of Honda and Acura vehicles for attaching bumpers, side skirts, engine undertrays and splash shields. The clips fit into a 1...
View full detailsWheel Arch Lining Screw, Honda 90114-SE0-000
These black metal screws are the most common size used by Honda to secure wheel arch linings and splashguards. The screws are high quality parts id...
View full detailsHonda Side Skirt, Sill Moulding, Rocker Cover Trim Clips- 91504-SP1-003
These are used on a few different Honda models. In particular they are the clips used to attach the side skirts to the EP3 Civic Type-R. They are d...
View full detailsHonda Exterior Body Moulding Clips for Protective Lower Door Moulding Trims- 75315-S9A-004
This clips have two part numbers from Honda. 75315STKA01 and 75315S9A004. The clips are used on exterior body and door mouldings.
7mm Fir Tree Clip for Carpet & Upholstery, Honda 90667-S0D-003**
These black fir tree clips are common on lots of Honda models but do originally come in a wide range of colours. These are black, fit into a 7mm ho...
View full detailsHonda Snap Fit Wheel Arch Surround Flare Trim Clips- 90601-SMG-003
These yellow v-shaped trim fasteners are used to attach the wheel arch trim in place on some models of Civic, CRV and HRV. The clip is likely to sn...
View full detailsHonda Plastic Weatherstrip & Rubber Door Seal Clips, Green- 72311-S5S-003
These are a high quality alternative to the genuine Honda parts. These green rubber seal clips are used to attach the rubber door seals or weathers...
View full detailsHonda Plastic Rivet Fastener Clips- 91545-SE0-003
A standard 8mm push fit plastic rivet used for attaching interior and exterior trim panels such as wheel arch linings, boot linings, engine bay shi...
View full detailsPush Plug Clip for Wheel Arch Linings & Splashguards- Honda 90682-SEA-003
Simple push plugs used to hold wheel arch linings or splashguards in place on several Honda models. These fasteners simply push in to click in place.
Wheel Arch Moulding Trim Clips- Honda 91513-T0A-A01
These small black clips are used on some Honda models to attach the plastic trims that run around the edges of the wheel arch. This clip has Honda ...
View full details10mm Push Fit Bumper Grille & Engine Under Tray Trim Panel Clips- Honda 91503S7A003
These are short length push fit plastic rivets used on several Honda cars. The clips are normally used for securing thin panels such as arch lining...
View full detailsExterior Sill Moulding & Side Skirt Clips, Honda 91514-SAA-003
These are used on the several recent Honda cars including the Civic and Jazz. They are fitted to attach the side skirts or plastic sill covers that...
View full detailsHonda Windscreen Cowl / Scuttle Panel Plastic Retainer Clips- 91501SNA003
These simple push fit clips are normally used to attach the windscreen cowl that runs along the bottom of the windscreen and covers the windscreen ...
View full details8mm Black Push Fit Plastic Rivet- Honda 91505-SL0-003
These clips are used by Honda on a wide range of car and bike models and a wide number of parts. They are found on engine bay shields, radiator cow...
View full detailsTailgate Exterior Trim Panel Fasteners, Honda 91513-SJK-003
These white clips are normally used to attach exterior trim panels to the rear tailgate on some Honda cars. The clips are typically used on the str...
View full detailsBumper, Grille, Sideskirt, Undertray etc Plastic Trim Panel Clips- Honda 91503-SP0-003
These are a large screw fit plastic clip that is widely used on older Honda cars. They are used on bumpers, side skirts, sill mouldings, undertrays...
View full detailsInterior Pillar Trim Cover Clips, Honda 91561-SJD-003
These two part, push to fit clips are used the secure the A-pillar interior trim on several Honda models. The clip is a special design that secures...
View full detailsHonda Plastic Retainer Fastener Clips for Bonnet Insulation / Hood Insulator 91501-STK-003
Common Honda bonnet insulation fastener used across many of their range of cars.
Honda Plastic Trim Clips for Bonnet Insulation / Hood Insulator- 91501-SWA-003
These are distinctive clips used to fasten bonnet or hood insulation panels. They simply push through and click into place to secure the fabric ins...
View full detailsSill Moulding / Side Skirt Mounting Clips / Fasteners - Honda 91513SM4000
These are the upper clips used to attach side skirts or sill moulding covers to several different Honda vehicles. Each clip includes the foam seali...
View full detailsInsulation & Rubber Seal Button Clips, Honda 91520-SCC-003
These little round push button clips are used to secure rubber weather strips and seals in position. They are normally used by Honda on the seals t...
View full detailsPlastic Interior Trim Clips- Door Cards, Quarter Panel & Boot Lining Trims- Honda 91560-SZ3-003
These are used on many different Honda models for attaching interior trim panels. They hold door cards, interior pillar covers, rear quarter panel ...
View full detailsButton Clip for Rubber Weatherstrip Seals, Honda 91520SM4C01
These simple push fit button clips are used to fasten rubber seals in position. The clips are normally used on the rubbers that run along the edges...
View full detailsScrew Grommet Expanding Nut- Fits an 8mm Square Hole- Honda 90505-SD4-003
These take an M4 screw and fit into an 8mm square hole. They are a good universal part used to fasten parts or trims to metal bodywork. This partic...
View full detailsEdge Nut / U-Nut for Trim Panels, Undertrays & Shields, Honda 90308-SB2-013
These edge nuts are used to attach parts such as engine undertrays, bumpers, splashguards and interior trim on Honda cars as well as fairings and c...
View full detailsRubber Door Seal & Weatherstrip Clip - Honda 90651-TP8-003
One of the door seal clips used by Honda on a few different models. These clips are fairly universal so long as the hole size in the bodywork is co...
View full detailsHidden Trim Panel Clips, Honda 91560-S04-003
These white trim panel clips are used on some Honda models, normally to attach door sill cover mouldings. They have also been used to attach trim p...
View full detailsWindscreen Cowl (Scuttle Panel) Clip- Honda 90602-SFA-004
This is a distinctive looking clip with an almost semi circular head. The clip is used by Honda on a number of different cars to attach the windscr...
View full details10mm Push Fit Panel Retainer Clips, Honda 91505TY2003
These wide collared parts are used by Honda to secure the underbody trim covers, shields and insulation onto many of their modern vehicles. The cli...
View full detailsWindscreen Cowl Trim Clips, Honda 91508-SR3-000
These push fit plastic rivets are used to attach the windscreen cowl trim on some Honda vehicles. The clip is a normal push fit rivet which clicks ...
View full detailsBonnet Sounds Deadening Insulation Clip, Honda 91501-STK-003
These parts are used to fasten the fabric sound deadening to the underside of the bonnet on several different Honda models.
Door Seal & Weatherstrip Clips, Green, 5mm Hole- Honda 91568-SR2-003
These are a universal part very common on a wide range of models. The clip fits into a 5mm hole in the bodywork, while the longer canoe-shaped head...
View full details8mm Plastic Rivet for Sill Covers, Side Skirts & Sill Trims- Honda 90505-SX0-003
These 8mm clips are used on the CR-V (02-06), the Prelude (96-01) and some models of the Odyssey and the Shuttle. They are normally used for the pl...
View full detailsRubber Seal Weatherstrip Clips, Cowl Vent Bonnet Seal Clips- Honda 91502-S84-A11
These are used for attaching rubber seals to apertures on several Honda cars. They are normally used on the rubber seals at the front or rear of th...
View full details10mm Plastic Bumper Clips- Front & Rear Bumper Fasteners- Honda 91502-SP0-003
These are strong, screw fit plastic clips used to fasten bumpers and other large trim panels in place on some Honda cars.
Honda Interior Door Panel and Trim Retainer Clips- 91560SP0003
These are widely used on older Honda models. The clips are used to attach many different interior trim panels from door cards to boot linings and s...
View full detailsWindscreen Cowl Fastener Clips, Honda 90602-TA0-003
Blue trim clips almost always used to secure the windscreen cowl. This is the plastic trim sat at the bottom of the windscreen and which covers the...
View full detailsCable & Wiring Loom Harness Clip, 8mm hole, 5mm cable bundle- Honda 91547-SE0-003
These black cable and wiring loom harnesses are used to securely hold cables and looms in place. The clips come with a sealing washer to give a goo...
View full detailsHonda Plastic Clips for Triangular Door Wing Mirror- Garnish / Trim / Cover 76222-SP1-003
These clips have a distinctive patterned head and a foam sealing washer. They are used on some Honda cars normally to attach the triangular trim pi...
View full detailsSide Moulding, Wheel Arch & Sill Moulding Clip, Honda 91512-SJ6-J01
These small moulding clips are used to secure side mouldings, wheel arch trims and occasionally sill moulding or side skirt trims. Most items we se...
View full details8mm Screw Fit Rivet for Bumpers, Sideskirt & Grilles- Honda 90505-SM4-003
These clips are used on a number of older vehicles and normally by Honda. The clips fit into an 8mm hole and the parts are normally used to attach ...
View full details