Honda Car Trim Clips, Fixings & Fasteners

These parts are used to fasten the fabric sound deadening to the underside of the bonnet on several different Honda models.

These edge nuts are used to attach parts such as engine undertrays, bumpers, splashguards and interior trim on Honda cars as well as fairings and c...

Blue trim clips almost always used to secure the windscreen cowl. This is the plastic trim sat at the bottom of the windscreen and which covers the...

These are used for attaching rubber seals to apertures on several Honda cars. They are normally used on the rubber seals at the front or rear of th...

These are strong, screw fit plastic clips used to fasten bumpers and other large trim panels in place on some Honda cars.

These are widely used on older Honda models. The clips are used to attach many different interior trim panels from door cards to boot linings and s...

These black cable and wiring loom harnesses are used to securely hold cables and looms in place. The clips come with a sealing washer to give a goo...

These clips have a distinctive patterned head and a foam sealing washer. They are used on some Honda cars normally to attach the triangular trim pi...

These small black grommets are fitted into the wing and used with a screw to line up and fix the corner of the bumper. They are used on a number of...

These small moulding clips are used to secure side mouldings, wheel arch trims and occasionally sill moulding or side skirt trims. Most items we se...

These clips are used on a number of older vehicles and normally by Honda. The clips fit into an 8mm hole and the parts are normally used to attach ...

This is a standard screw grommet used on several Honda models. The clips is nearly always used on the front or rear door panels. The grommet fits i...

These small, orange plastic clips are used on weatherstrip seals and rubber aperture seals. The clip head fits inside the rubber seal and then the ...

These arrowhead plastic clips are used to secure rubber seal in position. There are commonly used on the windscreen cowl and some door seals.

This small screw fit rivet is used in a 6mm hole. It is used on several Honda vehicles including the DA5 and DA7 Integra where is used to attach th...

An 8mm screw fit plastic rivet with a 20mm collar. These are fitted to some Honda cars on interior and exterior trim panels such as bumpers, wheel ...

These standard fir tree clips are fitted to several older Honda models. The clips are used to attach interior trims and upholstery.

These distinctive black plastic clips have a 10mm hexagonal head. The clips are used on some older Honda vehicles for attaching engine undertrays, ...

These are a simple clip to push in and lock in place trims, covers and seals.

These are used on lots of different Honda bikes but also on some car models. The clips are fitted to fascias and trims and then snap into place to ...

This is another common plastic fastener used by Honda on cars, motorcycles and ATV vehicles. The clip fits into a 6mm hole and is used on fascia co...

These 10mm push fit plastic rivets are used on several Honda models normally to attach radiator grilles and bumpers.

These parts are used to locate and clip the front grille in position on some Honda models such as the Mk8 Civic.

A standard plastic screw grommet used for mounting body panels, trim panels and parts to bodywork. This is a high quality alternative to the genuin...

These bright orange trim panel clips are used on several Honda models. They are a standard clip that is hidden from view when fitted and normally u...

These plastic clips are used to attach rubber weatherstrip seals around apertures on the vehicle. The large head of the clip fits into a hole in th...

These small clips are used on a range of Honda vehicles. They are used on some cars for splashguards but more commonly on Honda bikes and ATVs for ...

Screw fit plastic clips for interior trim panels and linings that used on several Honda cars.

Commonly found on pillar trims and other interior trim panels, this plastic clip is widely used throughout the Honda range.

These 10mm threaded brass nuts are used on many older Honda vehicles for attaching side mouldings, window pillar strips and various other trims. Th...

These are a white plastic screw grommet that normally is used to connect the bumper corners to the wings. Seen in white or black, the grommet fits ...

These are simple 8mm plastic screw fit rivets that are used by Honda on several vehicles. They are normally used for exterior trim panels such as w...

A standard grommet used on a very wide range of Honda vehicles. The grommets are used all over the vehicle from interior panels and the dashboard t...

These are a specific clip used on some versions of the mk7 Civic. They often get broken in a slight impact and so need replacing to realign the bum...

These pin retainer clips are used on several modern Honda models to secure the wheel arch lining in position. The pin pushes into a retainer and cl...

These clips are used for retaining boot carpet or interior trim panels. An example use is as Honda FRV boot carpet trim clips. The clips have a mot...

Small 6mm screw fit plastic fasteners also known as scrivets. These clips are used to fasten interior and exterior trim panels such as pillar trims...

Typically used for arch linings or bumpers and for mounting other plastic trim parts onto the metal bodywork.

These plastic clips are normally used to secure wheel arch linings or other plastic trim panels in position. The clip pushes through the trim and i...

These push fit plastic rivets with foam washers, are used on some Honda vehicles to attach the windscreen cowl. This is the piece of plastic trim t...

These plastic trim clips are used on a few Honda models but are not very common. The clips come complete with the foam sealing washers.

Fitted to several different Honda cars, these blue plastic clips are normally used to attach the plastic body mouldings fitted to the outside of th...

These are a standard screw grommet used to attach parts or trims onto metal bodywork without having to screw directly into the metal.

These are screw fixing grommets used to attach parts and trim into metal bodywork. They come in many different sizes. These are identical to Honda ...

Used on a few different models, these attach the trims that run along the roof edge. They are normally known as drip mouldings or rain channel trim...

These red clips are used to attach interior fascia trim panels normally around the dashboard or on door cards. They are used on several modern Hond...