Fiat Car & Van Trim Clips, Fixings & Fasteners

These simple expanding push fit rivets are fitted to several different modern Fiat cars. This includes the latest versions of the 500, Panda and Ti...

A good universal interior trim clip, this part is used by Peugeot, Citroen, Fiat and Alfa Romeo. The clip fits into a 9mm hole and includes a pre-f...

These fir tree clips fit a 7mm hole and are used by Fiat on many different vehicles. Typical uses include bonnet insulation and sound deadening pan...

These screw fit plastic fasteners are used on some Fiat models normally to secure bumpers and wheel arch linings. The clips fit into an 8.5 or 9mm ...

These black plastic clips have a metal spring insert that grips the lugs of a trim panel when inserted. The clips are normally used for interior tr...

These small clips are easy to fit and easy to release. A quarter turn of the head is enough to release the centre pin and allow them to be removed....

These simple push pin rivets expand when the centre pin is inserted. This clip is used by Fiat to secure some trim mouldings and liners.

These black plastic screws are used on some Fiat models to fill the holes in the roof where the roof bars or moulding trims are secured. The clips ...

These are used to hold the fabric bonnet insulation sheets in position on the underside of the bonnet. They can get damaged or lost and this result...

The distinctive 8mm clips are used on several Fiat models. The use ranges from side skirts to bonnet insulation and boot linings.

These simple interior trim panel clips are hidden when fitted. They are used on several different Fiat models normally for panels such as tailgate ...

These plastic nuts are used by Fiat and Alfa Romeo. They are not threaded but have sprung tabs inside which attach onto a weld stud or threaded bar...

This is a common interior trim panel fastener on modern Fiat cars. The clip is used to secure panels such as tailgate linings and other trims withi...

A common fir tree clip used by Fiat on their cars and vans. The clip fits into an 8mm hole. A typical use is to hold the wheel arch lining or splas...

These push fit clips are used on the Fiat Fullback for the wheel arch linings.

These small clips are used on some Fiat models including the Fiat Fullback. They are used for the trim on top of the step and for other interior tr...

These black clips are used to ensure the front window stays properly aligned as it goes up and down. The clip is held in by a single pin and can be...

This clip is mounted to the tailgate of the car and the parcel shelf hangs from it. When the tailgate opens, the parcel shelf lifts because it is a...