[CloudSearch app] All products

A standard push fit expanding plastic rivet which can be used for interior trim panels, dashboards, boot linings etc. The clip is used on many diff...

These two part green and white trim clips are used on several Renault vehicles. The clips normally separate when the trims are disassembled. They a...

Common two-piece clip that often separates when disassembling trims or door cards. The clips are supplied and fitted in their assembled state but d...

A popular 8mm push pin rivet that is used on some Audi cars to attach splashguards, bumper covers and engine bay covers.

This is a very common and very widely used clip. It's normally used on interior trims but can be for a very wide range of purposes. Door cards, pil...

Indasa double sided moulding tape is a high quality tape for professional use. The 0.8mm thick foam tape has a strong adhesive to firmly bond mould...

These push fit clips are used on the Toyota GT86 to secure the front wheel arch linings and splashguards.

These small white clips are normally used to attach the exterior trim cover by the wing mirror. The trim is normally triangular shaped and sit just...

These clips are used to hold the bonnet stay in position when the bonnet is closed and the stay is down. The clip holds the rod securely and stops ...

Our range of hose connectors are available in small packs or in larger bulk purchases. They are suitable for a range of uses and are made from toug...

These white clips are used on the F25 BMW X3 (2010-2017). They are the plastic fasteners for the side moulding strips that run along the bottom of ...

This part is extremely common on Alfa Romeo cars and is used to attach interior and exterior trim panels. The clip fits in a hole measuring 8mm x 1...

These are used for secure bodywork, trim panels and shields. The clip is used with a bodywork screw to hold parts in position. They are typically u...

These black clips are used on older VW cars and vans. They are normally used to position badges on the bodywork. In some cases, the clips are also ...

A distinctive interior trim clip with pre-fitted metal spring. These clips are normally used on plastic trim panels such as pillar linings, tailgat...

This plastic mounting clip with sealing washer is normally used to join bumper covers to the front or rear wings. These clips sit in the metal body...

These are used on the Nissan Primastar.

These yellow clips are used to attach the door card panel to the inside of a number of modern Mercedes models. Each clip is complete with foam sea...

These unthreaded nuts are common on modern Audi cars. They are almost always used to secure the plastic wheel arch linings. The unthreaded nut is t...

These distinctive black plastic clips have a 10mm hexagonal head. The clips are used on some older Honda vehicles for attaching engine undertrays, ...

These distinctive plastic rivets are used on a wide variety of VW, Audi and SEAT cars. The clip is used for many different purposes from engine bay...

This is common clip used by Toyota on many different models of car. The clip is used for a wide range of fittings including cowls, shields, fender ...

These small white clips attach the ends of the door mechanism connecting rods that run between the various locks, handles and latches of the doors....

A very common screw used on wheel arch linings and underbody shields across the VW range.

Black metal body screw for Hyundai wheel arch liners and trim panels. This fastener is often used by Hyundai to fix front and rear wheel arch linin...

White plastic interior trim clip for some Toyota tailgate and boot lid linings. This replacement fastener serves as a Toyota tailgate boot lid lini...

Used on the rear lights for the Vauxhall Vivaro A and Renault Trafic Mk2

These black plastic clips are normally used to secure wheel arch liners or underbody shields. The parts fit onto studs mounted on the body.

These black clips are used on the latest model of Ford Kuga (2020 onwards) to attach the side skirts or sill cover mouldings.

These metal clips are used with screws to attach parts such as underbody shields, engine undertrays and wheel arch linings.

Very common screw grommet or locknut used by Kia across their range of cars. These plastic nuts are used on all sorts of parts such as bumpers, doo...

Our range of hose connectors are available in small packs or in larger bulk purchases. They are suitable for a range of uses and are made from toug...

These flexible plastic blanking plugs are used to seal holes in bodywork or trim panels. Most vehicles have a number of access holes in the bodywor...

These are fitted to some Citroen cars and vans, in particular the C-Crosser which uses them throughout. They are typically used as wheel arch linin...

These metal spring clips are used the hold on fascia panels and dashboard trim on the interior of several SEAT models. The clip normally fits to a ...

This clip is used to secure the bonnet support stay in position when the bonnet is closed. If the clip is damaged and cannot be used then it can ca...

These oval grommets are used for mounting and positioning parts such as pillar covers, sill entrance covers and any other trim panels and upholster...

These are widely used across the Citroen and Peugeot range. The clip is oval shaped and is used all over the vehicles. The shape of the clip allows...

Side moulding clips used on some models of the W124 Mercedes E class and W201 Mercedes 190. These are high quality OE equivalent parts and availabl...

These wide green plastic trim clips are used to attach the tailgate lining on the Mercedes-Benz C-Class W205.

These aftermarkets trim clips are produced to the exact specifications and often in the same factories as the original VW parts. Typical uses inclu...

These clips are used with rubber grommets to attach side skirts, sill mouldings, wheel arch flares, headlinings and other interior and exterior tri...

These push fit rivets are used on some Citroen models that are made in conjunction with Mitsubishi. They are used to attach larger trim panels such...

A simple plastic push fit rivet that goes into a 6mm hole. The centre pin pushes in to hold in place. These small and lightweight clips are normall...

This is a Renault door card clip that is common across their range. The clip is a two piece fastener but they are supplied and fitted pre-assembled...

This is one of three types of side moulding clip used on the 3rd generation of VW Golf. Each trim moulding uses a different combination of the thre...