[CloudSearch app] All products

These M6 metal bolts have a captive washer and are used on some Tesla vehicles for the underbody shields and trays.

This is a common bonnet stay holder clip on Mazda vehicles. The bonnet support rod clips into this retainer when not in use. The clips can easily b...

These are a popular black plastic rivet that expands when fitted. They are used on many different vehicles within the Jaguar Land Rover model range.

These are small white plastic clips used to secure the tweeter cover and wing mirror trim to the inside of the door . They are used on many differe...

These small black trim clips are used on several Volvo car models to attach interior trim panels. They are used as tailgate lining clips, pillar tr...

These locking star washers are suitable for attaching underbody noise and heat insulation. The corrosion resistant parts are used throughout the Sk...

These distinctive, pale blue clips are used on some models of the Nissan X-Trail to attach the side moulding strips on to the exterior of the car. ...

These white clips are Fiat Punto scuttle panel clips. They are used on all models of the mk3 Fiat Punto to secure the plastic windscreen cowl that ...

This yellow clip holds the bonnet rod safely out of the way when not in use. The clips can be easily damaged but are quick and easy to replace. If ...

These distinctive yellow trim clips are used to fit side body mouldings to the Toyota RAV4 (2000-2005). The clips are used on the rear wheel arch f...

These green clips are common on Vauxhall door cards and some other interior trim panels. Our clips are high quality aftermarket equivalents produce...

These clips are very widely used on Fiat and Alfa Romeo cars and commercial vehicles. The clip is a simple grommet but is oblong which allows for s...

Blue trim clips almost always used to secure the windscreen cowl. This is the plastic trim sat at the bottom of the windscreen and which covers the...

Small back interior trim clips used on several BMW models. These parts are normally used to attach interior panels such as boot linings, tailgate l...

These light blue clips are used on interior pillars, boot linings and some door cards across various Honda models.All of our parts are high quality...

These clips are used to mount the rear tail lights on some models of the Mercedes-Benz Sprinter and the Volkswagen Crafter. The clips slide into mo...

This push fit plastic rivet is fitted to modern Nissan cars normally as a bumper, wheel arch or engine shield retainer. The clip is a simple expand...

These bolts have a ridged edge that secures into a sprung nut. This type of fasteners is normally used on undertrays, bumpers, arch linings and oth...

These small interior panel clips are one of the clips used to hold the front and rear door cards in place on models such as the Audi A4 (01-08) and...

These expanding rivets are normally used to attach loose fitting panels such as wheel arch linings or splash guards. They fit into an 8mm hole and ...

These 8mm clips are used on the CR-V (02-06), the Prelude (96-01) and some models of the Odyssey and the Shuttle. They are normally used for the pl...

These parts include the rubber grommet as shown in the photo. They are used for attaching the bump strips that run along the side of the car and th...

These fasteners are an unthreaded nut used for various purposes within the Mercedes-Benz range. They are not threaded inside and so normally tighte...

Grey plastic body moulding clips which are used to attach exterior trim. The clips slide onto the back of the trim and then click into holes in the...

These small plastic clips click into a 5mm diameter hole. The clips are used to secure lightweight parts such as air intake hoses, engine bay shiel...

A standard 8mm push fit plastic rivet typically used to attach wheel arch linings, engine bay shields or interior trims. These are a high quality e...

These parts are identical to Kia part number 9255236000. The clips are used to secure the plastic body moulding trim onto the outside of the rear d...

These distinctive white trim clips are fitted on some older VW cars and vans. The clip is normally used to attach trim strips over interior pillars...

These grey plastic trim clips are used to attach the Peugeot 308 side mouldings that run on the outside of the doors along the side of the vehicle....

A wide collar clip used on some Mercedes-Benz side skirts and plastic sill moulding covers. The screw has a Torx head.

This is a widely used yellow / orange clip found on the rubber weatherstrip seals and also on the door membrane. They are used on a number of diffe...

These nuts are used on some models of the Mini R50, R52 and R53. The clips are typically used on trim panels and parts. An example use is to attach...

These plastic cylinder clips are used to secure the bumper and arch trims on the early models of Smart Fortwo cars.

There are two very similar clips used by Audi, Seat, Skoda and VW on most of their models. This version is 16mm long and there is also a 22mm versi...

This fir tree style clip has a distinctive head with a cut out portion. The clip is used on a number of different Lexus and Toyota vehicles on upho...

Small 6mm screw fit plastic fasteners also known as scrivets. These clips are used to fasten interior and exterior trim panels such as pillar trims...

The distinctive 8mm clips are used on several Fiat models. The use ranges from side skirts to bonnet insulation and boot linings.

These plastic button clips are perfect for holding panels or trims in place. They are a high quality universal part and when used in the correct si...

This tape is an ideal replacement for the original Ford adhesive used to attach exterior trims and mouldings. The tape be used in conjunction with ...

Indasa double sided moulding tape is a high quality tape for professional use. The 0.8mm thick foam tape has a strong adhesive to firmly bond mould...

These white panel clips are used to hold on linings or trims. The head has a gap of 2.6mm where the trim can be slid onto. The clip is perfect for ...

These distinctive plastic clips are used to secure some exterior trims in position on Mini vehicles.

This is a common size of bonnet stay holder used on a number of Toyota cars. The plastic clip fits into a hole on or next to the landing / slam pan...

Complex screw grommet that twists and locks in position. This part is used on many different modern Mini cars and is normally used on exterior pane...

Used on several VW cars and vans, these are also a good universal screw grommet for mounting and joining parts and panels.

Very common across the entire Volkswagen Group of VW, Audi, SEAT, Skoda and Porsche. The clips are used with wheel arch liners, interior trims, qua...