[CloudSearch app] All products

These small clips come with the foam sealing washer as shown in the picture. The clip is used on a wide range of models and for a number of differe...

Commonly used by Vauxhall for bumper trims and covers, these long reach plastic rivets fit into a 6.5mm hole. The collar on the clip is 15.5mm.

These are used on many different Honda models for attaching interior trim panels. They hold door cards, interior pillar covers, rear quarter panel ...

This plastic push fit clip is a standard grey rivet style fastener. They fit into an 8mm hole and are a good universal fastener that can be used fo...

These cable ties are used to secure wiring looms and washer hose on vehicles across the Volkswagen group range. The clip fits onto the edge of a b...

These black plastic screws are used on some Fiat models to fill the holes in the roof where the roof bars or moulding trims are secured. The clips ...

These pink plastic fasteners are used on side mouldings, sill covers and wheel arch flares.

These white fasteners are normally used to securely fit the interior door card panels to several BMW models. They are also occasionally used for ot...

Mitsubishi bonnet insulation clips used to hold the fabric sound proofing panels in position on the underside of the bonnet. These clips fit into a...

Distinctive yellow and white trim clips with a rubber seal that are used to securely mount the front and rear door cards on the Jeep Renegade. The ...

Used for interior trim panels, normally door cards or tailgate linings. These green plastic trim clips are fitted to several Hyundai cars including...

This simple screw fit rivet fits into a 5mm hole and is used to fasten bumpers and other trim panels in place on some models of Peugeot cars.

These unusual clips are one of several used to attach the front and rear door cards on the Ford Fusion and Ford Fiesta Mk5 (2002-2008). The clip ha...

This clip fits into an 8mm hole. They are used on several Ford models for securing interior or exterior trim panels.

These 6.5mm fir tree clips used by Peugeot and Citroen have an 18mm head. The black clip is used in lots of different places depending on the car. ...

This distinctive white fastener is one type of clip used to attach side skirts or sill trim covers to several Mercedes models.

These clips are extremely common across the Toyota range. The clips are normally used around the edges of the wheel arch. They mount onto the wing ...

These clips fit into a grommet mounted in the bodywork. They are used for attaching door cards and interior trim panels onto some Jaguar cars. Each...

These rectangular collared retaining clips are normally used for the foam bumper impact absorption panels fitted behind the bumper covers.

These clips are used on pillar trims across a lot of the VW, Audi, Seat, Skoda and Porsche ranges. There is an identical clip available in white al...

A simple trim panel clip that is used to mount interior trim panels to some Land Rover vehicles.

These white plastic clips have a distinctive rectangular head and are used on several Renault models. The clips are used to attach protective plast...

These clear plastic and metal circular clips are used to secure the small triangular trim that sits in front of the door mirror.

These plastic rivets are used to secure front and rear bumpers, radiator surrounds and engine bay trims. They fit into a 10mm hole.

Our reflectors are produced in Austria by one of Europe's biggest brands. They are all road legal and E-Approved. This means they are suitable for ...

These clips are used on various Seat models including the Ibiza, Leon and Mii. The clip is a standard 8mm push fit rivet that is used to hold panel...

These trim panel clips are used on early models of the Smart Fortwo. They are used on parts such as the boot lining panels. The original clips may ...

This plastic trim clip is normally either white or yellow. Both are identical and this type of clip isn't visible when fitted. The clips are used t...

Used on several Vauxhall models, these clips are fitted by pushing in the head to expand the insert and lock into place. They are used on dashboard...

This clip is a simple to fit push rivet and releases easily with a quarter turn of the head. They are often used on panels which require access.

These small clips are easy to fit and easy to release. A quarter turn of the head is enough to release the centre pin and allow them to be removed....

These are simple plastic fasteners fitted by Land Rover to keep the splashguards in place on the front wheel arches of the MK2 Land Rover Discovery.

These clever clips push to fit and can be released with a quarter turn of the screw head. They are perfect for panels where access may be occasiona...

Indasa double sided moulding tape is a high quality tape for professional use. The 0.8mm thick foam tape has a strong adhesive to firmly bond mould...

These large headed black plastic rivet are used on large trim items such as bumper covers, sill mouldings and wheel arch linings.

These make an excellent universal plastic rivet for an 8mm hole. The pin has a long barbed shaft which expands when activated and so these are suit...

These clips are used on the Land Rover Discovery mk2 to attach rear bumper trims but they are also used on the Freelander mk1 to attach the tailgat...

These blue plastic trim clips are used on several Nissan models. The clip is often used for interior trim panels such as pillar covers and boot lin...

These plastic clips are used on the Jeep Renegade to secure rear wheel arch linings and around the front bumper. The clip fits into an 8.5 or 9mm h...

These Mercedes side moulding clips are used on several models. Each clip includes a pre-fitted grommet. The clips side onto the plastic side mouldi...

These two piece clips are widely used throughout the first Vivaro vans. The clips are normally used on interior trim panels such as door cards, cab...

This type of clip attaches to a barbed stud or shaft that is normally attached to the bodywork. The clip slides onto in and secures items such as c...

These distinctive clips are used on modern Audi vehicles for sill mouldings and side skirts. The clip is an expanding plastic rivet with an allen k...

These clips are used on a number of MG and Rover vehicles to attach the protective plastic kick plates on the door sill. The clip is quite distinct...

This is one of many different clips used by Toyota to affix the side moulding trim onto models such as the Land Cruiser Prado. The clips are colour...

Common Honda bonnet insulation fastener used across many of their range of cars.