[CloudSearch app] All products

These clips are extremely common across the Toyota range. The clips are normally used around the edges of the wheel arch. They mount onto the wing ...

These are distinctive clips used to fasten bonnet or hood insulation panels. They simply push through and click into place to secure the fabric ins...

These screws are very common on wheel arch linings, bumpers and other shields.

These solid, 8mm plastic fir tree clips are used on models such as the Renault Kadjar to attach the engine undertray panel. The clips are black and...

These are the plastic trim clips that are used to attach the sound deadening to the underside of the bonnet on the TT9 Ford Transit made between 20...

A common and widely used interior trim panel clip. These fasteners are used by Honda to secure items such as tailgate linings, pillar covers, door ...

Our reflectors are produced in Austria by one of Europe's biggest brands. They are all road legal and E-Approved. This means they are suitable for ...

Mitsubishi bonnet insulation clips used to hold the fabric sound proofing panels in position on the underside of the bonnet. These clips fit into a...

These screw fit plastic fasteners are used on some Fiat models normally to secure bumpers and wheel arch linings. The clips fit into an 8.5 or 9mm ...

These are simple push fit plastic rivets that fit into an 8mm hole and expand when the centre pin is inserted. The clips are used on several differ...

Commonly used by Vauxhall for bumper trims and covers, these long reach plastic rivets fit into a 6.5mm hole. The collar on the clip is 15.5mm.

This trim panel clip is very widely used by Toyota on interior trim panels such as the pillar trims, sill mouldings and boot linings.

These are simple plastic fasteners fitted by Land Rover to keep the splashguards in place on the front wheel arches of the MK2 Land Rover Discovery.

This is a common push fit clip used on many modern Suzuki cars. The clip is often used on the wheel arch linings and splash guards under the vehicl...

These small edge clips are used on some Ford models to secure the plastic windscreen cowl that covers the wiper motor and linkage at the bottom of ...

These chunky plastic trim clips are used by Toyota on models such as the Mk3 RAV4 to attach the front grille. The clip expands when the centre in i...

These black plastic screws are used on some Fiat models to fill the holes in the roof where the roof bars or moulding trims are secured. The clips ...

Each of these clips has an integrated rubber seal moulded into the design. They are used on some modern Jaguar vehicles to attach interior and exte...

These pink plastic fasteners are used on side mouldings, sill covers and wheel arch flares.

Our range of hose connectors are available in small packs or in larger bulk purchases. They are suitable for a range of uses and are made from toug...

These blue plastic trim clips are used on several Nissan models. The clip is often used for interior trim panels such as pillar covers and boot lin...

These 8mm expanding plastic rivets are used on some BMW cars, normally within the boot area or tailgate lining. The clip is a simple plastic rivet ...

These are good universal screw grommet that fits into a square hole measuring 11mm x 11mm. Fiat have used this part on several of their vehicles to...

This simple screw fit rivet fits into a 5mm hole and is used to fasten bumpers and other trim panels in place on some models of Peugeot cars.

These unusual clips are one of several used to attach the front and rear door cards on the Ford Fusion and Ford Fiesta Mk5 (2002-2008). The clip ha...

These fir tree clips are for mounting interior trim panels such as door cards. The head twists into the mounting point on the panel allowing the cl...

This clip fits into an 8mm hole. They are used on several Ford models for securing interior or exterior trim panels.

These small clips come with the foam sealing washer as shown in the picture. The clip is used on a wide range of models and for a number of differe...

These small white plastic grommets come with integrated rubber seals. They are very commonly used on Audi cars. They are used in a wide range of pl...

These screw grommet mounts have an integrated rubber seal. They are used for locating and mounting panels such as door card trims, side skirts and ...

One of many clips used for attaching the side mouldings and trims on to various Toyota models including the Land Cruiser Prado. There are a lot of ...

These are used on many different Honda models for attaching interior trim panels. They hold door cards, interior pillar covers, rear quarter panel ...

Indasa double sided moulding tape is a high quality tape for professional use. The 0.8mm thick foam tape has a strong adhesive to firmly bond mould...

These metal nuts have a large collar and are used to retain the wheel arch linings, undertrays and shields in position on some Ford cars and vans.

These pinch-to-fit clips are used to secure the bonnet insulation on most modern Jaguar models. It's also used on some interior carpets and sound d...

These black plastic clips have a metal spring insert that grips the lugs of a trim panel when inserted. The clips are normally used for interior tr...

These are common on some older model Porsche cars. The clips have a crescent shaped head so they can be screwed onto the trim panel. They are used ...

Black metal screws used on many different Hyundai vehicles to secure the engine undertray in position.

These twin access clips will hold hose diameters between 4 and 6mm. The clips fit into a 6.5mm hole.

These yellow fasteners are used on the Smart Roadster to secure the front wheel arch lining to the wing and some bumper trims in position.

These clips are the same as part number FCP-0040 except the head is rotated 90 degrees. They are normally used as the end clip or corner clips on a...

This small expanding plastic rivet fits into a 5mm hole. It is used on some Subaru models for securing bumper trims and windscreen cowls.

These white fasteners are normally used to securely fit the interior door card panels to several BMW models. They are also occasionally used for ot...

These are used on most modern Hyundai cars. The clips are used to attach wheel arch linings and occasionally bumpers and trim.The grommets fit into...

These clips are used on various Seat models including the Ibiza, Leon and Mii. The clip is a standard 8mm push fit rivet that is used to hold panel...

These distinctive clips are used on modern Audi vehicles for sill mouldings and side skirts. The clip is an expanding plastic rivet with an allen k...