[CloudSearch app] All products

Each fitted with a rubber grommet, these clips are perfect, high quality replacement to the OE parts. The clips are used to attach the plastic moul...

These black blanking plugs or blind grommets are suitable for use on metal panels with a 2mm thickness. The plug is identical to Nissan part 80874-...

This is a standard 8mm push fit plastic rivet very widely used by Suzuki across it's car & bike range and for a number of different purposes. T...

These clips are used by Honda on a wide range of car and bike models and a wide number of parts. They are found on engine bay shields, radiator cow...

These small black plastic clips are used on some Nissan models to attach the plastic side mouldings onto the car. Each clip includes a foam sealing...

These metal nuts are very widely used on Skoda vehicles. Typical usage examples include for parts such as arch linings, undertrays, sill covers and...

This parts are common on several models of the Yaris to secure the undertray and bumper. They are also used on some Lexus models and are interchang...

These metal stud fasteners push onto studs welded onto the car body. They are used on most modern Mini cars to secure underbody shields and heat in...

Plastic nuts used by BMW to secure loose trim items such as wheel arch linings and under body shields.

These clips are used on many different cars and commercial vehicles within the Volkswagen group including models produced by Audi, SEAT, Skoda and ...

These 30mm long bolts are used by VW on the front bumpers and radiator support of several models.

These light grey plastic rivets fit into an 8.5mm hole and are perfect for VW and Ford van linings. The clips are long and suitable for thicker ply...

These are used on several models. The clip is fitted onto the interior of the tailgate. The centre pin pushes in to lock the clip in place. The par...

These 7mm clips are used on modern Subaru models including some models of the Subaru Legacy, Outback and Impreza. The engine bay clips are used to ...

These clips are a perfect fit for the standard holes in VW vans. They are longer than the original clips and so they allow for thicker panels to be...

These are the upper clips used to attach side skirts or sill moulding covers to several different Honda vehicles. Each clip includes the foam seali...

These are side moulding clips used on a variety of BMW E36 3-series models. They are used to hold the exterior bump strips in place that run the le...

Foam sealing washers for use with panel and body clips. The diameter of the internal hole is approx. 9mm. The external diameter is 19mm and the thi...

These spring clips are normally used on narrow trim strips on the inside of the vehicle. Examples include pillar trims, roof linings and tailgate l...

Small screw grommets used for mounting trim panels and parts onto metal bodywork. These little clips fit into a 7mm square hole and are used by VW ...

These red lock nuts are used to secure underbody shields and trim panels to some Volvo models.

These small white locator grommets fit into hole in the bodywork. A trim panel is then attached either using a locator on the trim, or a self-tappi...

These clips are used by Skoda to attach plastic side skirts, sill mouldings, wheel arch flares, headlinings and other interior and exterior trims. ...

These simple push-fit plastic expanding rivets are used on the Subaru BRZ for many interior and exterior panels and trims. Uses include the tailgat...

These round headed, plastic button clips push through the rubber seals at the front and rear of the bonnet to fix them in place. They are used on s...

Each clip includes a foam sealing washer. The clips are used on the plastic body mouldings that run along the sides and wheel arches of the Ford Tr...

These clips are used to mount the front and rear door cards onto to several Focus, C-Max and Ford Kuga models. The clip includes a rubber seal and ...

These screws are very common on wheel arch linings, bumpers and other shields.

These small fir tree clips are used on some BMW models for securing lightweight pieces such as rubber weatherstrip seal corners or interior trim pa...

These small plastic weather strip clips are used to secure the rubber seals around the door openings. The canoe shaped head of the clip fits inside...

These flexible plastic blanking plugs are used to seal holes in bodywork or trim panels. Most vehicles have a number of access holes in the bodywor...

These white hidden trim clips are used on many BMW cars . They are almost always used to fit the plastic lining to the rear tailgate or boot hatch....

There are several Mini clips which look very similar to these so we would always recommend you check the photo carefully or use the Mini part numbe...

This part is normally used on interior panels that sit flush against the dashboard or centre console. These trims are sometimes decorative or are u...

A standard plastic fir tree clips that fits into a 7mm hole. These clips are used to secure interior trim panels such as boot linings and interior ...

These small, white plastic trim clips are used to secure the wheel arch flares and small trim mouldings to the bodywork on some Citroen cars and va...

These grey fasteners have a large rectangular collar. They fit into a 10mm hole and expand when the centre pin is inserted. They are used to attach...

The small moulding clips are normally used by BMW to secure the plastic windscreen cowl in position. This is the plastic cover that runs along the ...

These moulding clips fit onto the reverse of body mouldings and covers. This particular part is used by Suzuki to attach windscreen cowls onto some...

One of the door seal clips used by Honda on a few different models. These clips are fairly universal so long as the hole size in the bodywork is co...

These small black plastic trim clips are used on several Mini car models. The fasteners are normally used to attach exterior trim panels and plasti...

These white trim clips are used to attach interior trim covers such as the plastic sill covers on the door entrance.

Used on interior and exterior trim panels by BMW. Examples uses includes for headlinings, door cards and boot trims.

These clips are known to be easily damaged. They are very brittle and small knocks in the car park can cause a couple to pop out of place and for t...

These white clips are normally used to attach exterior trim panels to the rear tailgate on some Honda cars. The clips are typically used on the str...

These door card and trim panel clips are used by Ford on a number of vehicles. In particular they are the front door card clips used on the Ford Pu...

There are two very similar clips used by Audi, Seat, Skoda and VW on most of their models. This version is 16mm long and there is also a 22mm versi...

These Torx headed bolts are used on the sideskirts or plastic sill covers fitted to some BMW models. There are different lengths depending on the m...