Button Clips

These clips are a perfect fit to replace any damaged or missing fasteners on the Qashqai lower door seals. The rubber strip runs along the bottom o...

This is a pack of 10 high quality replacement trim clips for the Nissan Qashqai (2014 on) rear door seals. The rubber door seal is at the top of th...

These are used on many different Toyota models to attach bonnet insulations, upholstery and trims. The plastic trim clip has an overall diameter of...

These distinctive fasteners are very common on interior trim panels of many modern Mercedes cars and vans. The stem of the clip has springs to lock...

Simple push plugs used to hold wheel arch linings or splashguards in place on several Honda models. These fasteners simply push in to click in place.

These button clips are used to retain the sound deadening material that it fitted to the underside of the bonnet. They are used on most modern Mini...

These plugs are used on the underside of side skirts and sill covers fitted to many different Toyota models including some versions of the RAV4, La...

These simple push fit clips are normally used to attach the windscreen cowl that runs along the bottom of the windscreen and covers the windscreen ...

This clip is used by Mazda to secure the rubber seal that runs along the front or rear side of the bonnet. It's used on most modern Mazda cars incl...

Bonnet insulation fasteners suitable for almost all modern Hyundai cars. These are used across the Hyundai range to attach the sound deadening fabr...

These small clips are used along the inner edge of the bonnet tip or base to attach the rubber seal. They are used on a number of different Toyota ...

These simple trim clips are normally used to attach upholstered or fabric panels in position. In particular they are used by Mercedes to fasten the...

These are very common on Volvo cars and are normally used to attach the boot or tailgate lining. The clip pushes through the trim and clicks into t...

These button clips are used to secure the rubber seals in place that run around door apertures and bonnets on some Nissan vehicles.

These round headed, plastic button clips push through the rubber seals at the front and rear of the bonnet to fix them in place. They are used on s...

Older VW cars and vans such as the Golf Mk2, Corrado, T2/T3 Transporter and many others all use this simple push fit clip. They're used on door pan...

These little round push button clips are used to secure rubber weather strips and seals in position. They are normally used by Honda on the seals t...

These plastic button clips are perfect for holding panels or trims in place. They are a high quality universal part and when used in the correct si...

These are the clips used on most BMW cars to secure the under bonnet insulation. The clip is a simple button fastener that pushes in and clicks in ...

These parts are used to fasten the fabric sound deadening to the underside of the bonnet on several different Honda models.

identical specifications and equal in quality to the OE Toyota parts, these clips are a fraction of the cost. The clips are used to attach fabric i...

This is the clip that is used on most modern Kia cars to attach the material insulation to the underside of the bonnet.

These very small plastic button clips fit into a 4 to 5mm hole. They are used to secure rubber door seals or weatherstrips.

These very simple plug clips are fitted to some older BMW models such as the E30 3-series and the E36 Z3. They are used on interior trim such as do...

These small plastic clips click into a 5mm diameter hole. The clips are used to secure lightweight parts such as air intake hoses, engine bay shiel...

These 28mm round clips are used to attach the bonnet or hood insulation on many different models produced by Nissan and Infiniti. They can be fitte...

These distinctive clips are used by Toyota and Lexus on a wide range of different models to attach the seal at the rear of the front wing. Please s...

These plastic button clips are perfect for holding panels or trims in place. They are a high quality part and when used in the correct size hole ca...

These are a simple clip to push in and lock in place trims, covers and seals.

Bonnet insulation is the sheet of fabric that is often fitted to the underside of the bonnet. On many Citroen cars and vans, this clip is used to s...

These button clips are used to secure the rubber seals in place that run around door apertures and bonnets on some Subaru vehicles.

One Peugeot's bonnet insulation clips, this particular size is used on the 1007, 206, 207 and some of the Partner vans. The clip is a simple button...

A simple push button clip used to retain the bonnet insulation and sound deadening fabric panels fitted to the underside of the bonnet.

This clip fits into a 7mm hole and has a large 30mm diameter head. The head of the clip is gloss black so gives a prestige look when used on bonnet...

This is an old style blanking plug used by Honda but suitable for many other purposes. Honda used them to blank off holes in the dashboard where so...

These clips are used for retaining boot carpet or interior trim panels. An example use is as Honda FRV boot carpet trim clips. The clips have a mot...

These small clips push into a 7mm hole and the fin lock the clip in place. They are typically used by Toyota for small, light trim panels such as a...

These plastic fasteners are used on underbody shields and covers.

These simple button clips are used to secure the fabric insulation fitted to the underside of the bonnet on the Peugeot 107 and 108. They simply pu...

These simple button clips are used to secure the plastic trim seal at the rear of the front wings where they meet to door hinges. They often need r...

These large headed button clips are normally used on insulation or upholstery panels. The clip fits into a 7mm diameter circular hole in the bodywo...

These push fit button clips are used by Volvo to secure upholstery and insulation in place.

These simple, black button clips fit into an 8mm diameter hole. The part is used by Mitsubishi to attach insulation and upholstery panels in severa...

These black plastic clips are used to hold shields, panels and covers in place for wheel arches and underbody trims.

These small plastic button clips are used to fasten the bonnet insulation sheet to the underside of the bonnet. The plastic clips can become brittl...

These simple button clips are used to secure the bonnet sound insulation on the Citroen C1. This is the fabric fitted to the underside of the bonnet.