BMW Car Trim Clips, Fixings and Fasteners

These rectangular collared clips are used on some BMW models to attach and secure the plastic trim that runs at the bottom of the windscreen and wh...

These white clips are used on the F25 BMW X3 (2010-2017). They are the plastic fasteners for the side moulding strips that run along the bottom of ...

Used on several BMW models to hold the rubber seals in place around the door openings.

This kit contains the two plastic headlight adjuster mountings which often break within the E39's headlights. BMW do not sell these parts separatel...

These are used on some 5-series and 6-series BMW cars to attach the side skirts or sill mouldings. BMW use several similar clips with different len...

These screw grommets are widely used by BMW and fitted to many different models. Typical uses includes front or rear bumpers and tailgate trims. Th...

Very common on modern BMW tailgate or boot hatches, these expanding lock nuts are used to attach the plastic trim covers. This part fits directly i...

These panel clips are used on some BMW cars to secure interior trim panels and covers. The clips fit into an 8mm hole in the bodywork and secure pa...

These distinctive white trim clips are used to attach the exterior door and side moulding strips onto several different BMW models. They are used o...

These pale green fasteners are used on some of the older BMW models to secure front and rear door cards and trim panels. The clips have a crescent ...

The clip includes a foam sealing washer. They are used on a number of different BMW models for attaching interior trim panels, door cars and boot l...

These screw fit clips are used by BMW to secure the windscreen cowl onto several of their models. This is the part below the windscreen that typica...

These plastic fasteners fit into the bodywork and then allow a panel or part to be mounted without directly screwing into the metal body. The parts...

These small plastic inserts are used attach small trim pieces and vehicle badges. They are used on a wide range of BMW cars for the front and rear ...

These clips are used to attach the lower door moulding strips onto the exterior of the F25 model BMW X3 (2010-2017). The clips are one of two types...

This short expanding rivet fits into a 6.5mm hole. They are typically used by BMW on lightweight panels such as the windscreen cowl, sill mouldings...

This distinctive white push pin clip expands when the centre pin is inserted. It's used on various BMW cars to secure lower sill mouldings or side ...

This distinctive clip is used on several different BMW cars from the E9* 3-series to the E65 7-series. The usage depends on the model but these pla...

These side moulding clips are used to attach the protective plastic trims that run the length of the vehicle about half way up on the bodywork. Eac...

This black nut fits on a barbed or threaded stud. The part has a wide collar and is normally used to fasten insulation, heat shields and upholstery...

These are a spacer used to set the side skirt or sill trims off from the metal sill. They are used with a threaded bolt. Different models use diffe...

These grey plastic trim clips are used by BMW to attach panels such as tailgate linings, door cards and exterior body moulding strips. Each clip in...

These yellow clips help locate and line up the plastic sill covers on several different BMW models. The clips ensure the trims fit tightly and line...

This clip is used on some older BMW models and normally on interior trim panels. The clips are high quality aftermarket parts that are identical in...

High quality, aftermarket equivalent to BMW part number 51718212148. These twist lock bolts are normally used on parts such as engine undertrays.

A beige plastic fastener used to secure door cards, sill mouldings, tailgate linings and many other interior or exterior trims. The clip is used by...

Widely used on BMW models, these spacers ensure that the sill mouldings or side skirts sit the correct distance from the metal bodywork. There are ...

Distinctive green colour-coded clips used for lining up and fastening side skirts and sill mouldings in place on the E60 and E61 5-Series.

These light brown lock nuts fit into a 8.7mm square hole. The fasteners each come with a foam sealing washer and are normally used by BMW to fasten...

These screw grommets are used for mounting parts and trims to bodywork on several BMW models. The clips fit into a 8mm hole and each one includes a...

This style of fastener is widely used on older models of cars probably made before the 1980s. The clips slide around the edge of a trim panel and t...

These distinctive brown clips are used to attach the rubber weatherstrip seals onto the bodywork of the BMW E53 X5. They were also produced for BMW...

These large, distinctive mounting clips are used by BMW on some versions of the 3-Series from 2019 onwards (G20 G21).

These blue plastic trim clips are used on newer BMW models to attach the exterior lower moulding or side skirt to the sill.

These simple button clips push into an 8mm hole and click into place. They are used on several BMW vehicles, almost always for the tailgate lining ...

These plastic fasteners are normally used to attach fabric panels in place. The panels are typically those used for sound deadening or heat insulat...

These are used to attach the sill moulding door scuff plates onto most models of the BMW E34 5-series.

These small white clips are used to attach the lower door moulding trim onto the G11 7-Series. The clips are not sold separately by BMW who would n...

These large, distinctive mounting clips are used by BMW on some versions of the 3-Series from 2019 onwards (G20 G21). The clips have a rubber seal ...

These yellow brackets, mounts or trim clips are used to locate the exterior trim or side skirt that is fitted to the sill on several BMW models.