BMW Car Trim Clips, Fixings & Fasteners

These white hidden trim clips are used on many BMW cars . They are almost always used to fit the plastic lining to the rear tailgate or boot hatch....

These clips are widely used on modern BMW cars. The clip is a receiver for other parts and is normally used for underbody shields and trims such as...

These were used by BMW on several older models. They are a strong clip and so were typically used for larger trim panels such as bumpers, sill moul...

This plastic lock nut or expandable nut is extensively used by BMW. The part is used on most models since the 1990s and in a wide range of location...

This is a small kit of two BMW parts used to fit the floor mats in a number of older BMW models. The centre pin twists 90 degrees to lock in place ...

These plastic pop rivets or blind rivets are fitted using a rivet gun and are normally used for exterior trim panels such as wheel arch trims and s...

Each fitted with a rubber grommet, these clips are perfect, high quality replacement to the OE parts. The clips are used to attach the plastic moul...

These screw grommets are used on several BMW models for many different parts. Examples include bumpers, splashguards, underbody shields and interio...

The clips screw into the main carpet of the vehicle. The other side of these clips include the coarser half of a hook and loop fastener (Velcro-sty...

Plastic nuts used by BMW to secure loose trim items such as wheel arch linings and under body shields.

These small fir tree clips are used on some BMW models for securing lightweight pieces such as rubber weatherstrip seal corners or interior trim pa...

These standard push fit expanding rivets are fitted to several BMW models, typically on interior trim panels. The parts are used on items such as b...

The small moulding clips are normally used by BMW to secure the plastic windscreen cowl in position. This is the plastic cover that runs along the ...

These Torx headed bolts are used on the sideskirts or plastic sill covers fitted to some BMW models. There are different lengths depending on the m...

These white trim clips are used to attach interior trim covers such as the plastic sill covers on the door entrance.

These are a simple push fit plastic rivet that expands and locks securely in position when the centre pin is inserted. The clip fits into an 8mm ho...

These small white plastic grommets come with integrated rubber seals. They are very common on the BMW and Mini range and are used in a wide range o...

These wide collared retainer nuts are used to hold shields and panels in position. This type of wide collared clip is normally used to attach flexi...

These are side moulding clips used on a variety of BMW E36 3-series models. They are used to hold the exterior bump strips in place that run the le...

This kit contains the two plastic headlight adjuster mountings which often break within the E39's headlights. BMW do not sell these parts separatel...

Red trim clips used to attach the decorative trims that run on the doors and across the dashboard on some BMW models. The clips have a metal insert...

These 8mm expanding plastic rivets are used on some BMW cars, normally within the boot area or tailgate lining. The clip is a simple plastic rivet ...

Used on most BMW cars since 2010, these 8mm clips are normally used to secure boot linings and interior trim. The clip is a push fit rivet that exp...

These clear trim clips are used to attach the decorative trims that run on the doors and across the dashboard on some BMW models. The clips have a ...

This part is used on a range of BMW vehicles. The clip is common on door cards, interior trim panels, boot linings and pillar covers.

These fit into a 5mm diameter hole and have a head diameter of 18.4mm. The black plastic trim clips are used on several BMW models such as the E70 ...

These plugs fit into holes in the bodywork or in plastic side skirt or sill trims. Each clip has a small rubber o-ring seal around the stem.

Used on interior and exterior trim panels by BMW. Examples uses includes for headlinings, door cards and boot trims.

These distinctive clips are used on some side moulding trims, wheel arch flares and side skirts or sill covers. The black part of the fastener slid...

This is an expanding push fit clip used by BMW for attaching sound deadening panels, upholstery and carpet to various models within their range. Th...

These white fasteners are normally used to securely fit the interior door card panels to several BMW models. They are also occasionally used for ot...

These are the clips used on most BMW cars to secure the under bonnet insulation. The clip is a simple button fastener that pushes in and clicks in ...

These clips are used on several older BMW models including the E36, E34 and E38. The clips is used in different places on each model but are used t...

The screw fit trim clips have an unusual hex head on the pin. They are fitted to some BMW models to retain the sill mouldings or side skirts. Other...

This fastener is used to secure the door entrance sill moulding or scuff plate trims. This particular clip is used on many different models from th...

Small back interior trim clips used on several BMW models. These parts are normally used to attach interior panels such as boot linings, tailgate l...

These blue plastic trim clips are used to attach parts such as roof console, brake light covers, tailgate linings and pillar trims. They are used o...

A simple push pin expanding rivet for use in a 7mm hole. This clip is used to secure trim panels. When the centre pin is pushed in, the stem of the...

Fitting into a 6.5mm hole, these clips are used on several BMW models. The clip is a simple push pin plastic rivet that is used for bumpers, wheel ...

These standard white hidden trim clips are used by BMW for fitting door cards, pillar trims, tailgate linings and other interior panels.

These very simple plug clips are fitted to some older BMW models such as the E30 3-series and the E36 Z3. They are used on interior trim such as do...

These white clips are used on the F25 BMW X3 (2010-2017). They are the plastic fasteners for the side moulding strips that run along the bottom of ...

The long trims that run along the roof or around the doors on some BMW cars are secured in place using these plastic fasteners. The clips are quite...

These rectangular collared clips are used on some BMW models to attach and secure the plastic trim that runs at the bottom of the windscreen and wh...

This kit contains the two plastic headlight adjuster mountings which often break within the E39's headlights. BMW do not sell these parts separatel...

These screw grommets are widely used by BMW and fitted to many different models. Typical uses includes front or rear bumpers and tailgate trims. Th...

These yellow screw fasteners are used on several BMW models. They are almost always used to secure bumpers in position but are also used for the wi...

Very common on modern BMW tailgate or boot hatches, these expanding lock nuts are used to attach the plastic trim covers. This part fits directly i...