BMW 5-Series Fixings Trim Clips and Fasteners -G30, G31 (2017 on)

These screws are used to attach parts such as bumpers, undertrays, splashguards and wheel arch linings. Each screw is fitted with a captive washer.

This is a standard 6mm plastic rivet used for a number of purposes on many different BMW vehicles. They can be found used on interior trims and boo...

These are increasingly common on BMW models and are used as door card trim clips and other interior trim panel clips. Each clip includes the foam s...

Widely used across the BMW range, these are very simple push pin plastic rivets that fit into an 8mm hole. BMW use them often on upholstery and car...

A very widely used 5mm trim clip used by BMW on wheel arch flares, trims, linings and other various parts through the vehicle. They are a simple pu...

These are very widely used by BMW and are a simple push fit plastic rivet. When the centre pin is inserted, the clip expands and secures panels or ...

These small clips are used to attach the door sill trims or scuff plates. These trims are fitted in the door opening and are often marked with the ...

These wide collared nuts do not have a full thread and are normally single use items. They clamp on metal studs to hold insulation or shields in po...

Threaded plastic nuts with a 22mm diameter collar that is used on many BMW models. This is a common part with a wide range of fitments. Used to sec...

These clips fit into the original floor carpet interior of some BMW and Mini cars. The clip twists into a mounting point in the floor of the car an...

These are very widely used on modern BMW vehicles. The clips are used to join panels, mount trims, shields, bumpers, arch linings and undertrays. T...

These push fit retainer clips are used on many modern BMW cars to attach interior trim panels and door cards. The clips push in to expand and lock ...

These metal spring clips are used to secure interior trim panels in place on many different BMW cars. The clips are used to attach parts such as ce...

This plastic lock nut or expandable nut is extensively used by BMW. The part is used on most models since the 1990s and in a wide range of location...

These parts are used with screws to mount panels and trims. They are common on under body trays, splash guards and engine bay shields. They are use...

Plastic unthreaded nut used for various purposes and widely across the BMW range. They are not threaded inside and so normally tighten onto a coars...

These screw grommets are used on several BMW models for many different parts. Examples include bumpers, splashguards, underbody shields and interio...

These white hidden trim clips are used on many BMW cars . They are almost always used to fit the plastic lining to the rear tailgate or boot hatch....

These small white plastic grommets come with integrated rubber seals. They are very common on the BMW and Mini range and are used in a wide range o...

Used on most BMW cars since 2010, these 8mm clips are normally used to secure boot linings and interior trim. The clip is a push fit rivet that exp...

These are a simple push fit plastic rivet that expands and locks securely in position when the centre pin is inserted. The clip fits into an 8mm ho...

Used on interior and exterior trim panels by BMW. Examples uses includes for headlinings, door cards and boot trims.

These are the clips used on most BMW cars to secure the under bonnet insulation. The clip is a simple button fastener that pushes in and clicks in ...

These fit into a 5mm diameter hole and have a head diameter of 18.4mm. The black plastic trim clips are used on several BMW models such as the E70 ...

These plastic fasteners fit into the bodywork and then allow a panel or part to be mounted without directly screwing into the metal body. The parts...

These panel clips are used on some BMW cars to secure interior trim panels and covers. The clips fit into an 8mm hole in the bodywork and secure pa...

This black nut fits on a barbed or threaded stud. The part has a wide collar and is normally used to fasten insulation, heat shields and upholstery...

This distinctive white push pin clip expands when the centre pin is inserted. It's used on various BMW cars to secure lower sill mouldings or side ...

A beige plastic fastener used to secure door cards, sill mouldings, tailgate linings and many other interior or exterior trims. The clip is used by...

These plastic fasteners are normally used to attach fabric panels in place. The panels are typically those used for sound deadening or heat insulat...

These small plastic inserts are used attach small trim pieces and vehicle badges. They are used on a wide range of BMW cars for the front and rear ...