Products

These parts are used by Hyundai for interior and exterior trim panels such as bumpers, tailgate trim and boot linings.

This is a common fastener used across the Kia range. Typically uses include bumpers, grilles, and interior parts such as boot linings and tailgate ...

These are a standard screw grommet used to attach parts or trims onto metal bodywork without having to screw directly into the metal.

These clips are used for mounting trim, bumpers, lighting and other parts into position. The grommet fits into a square hole in the bodywork. A scr...

These are a standard screw grommet used to attach parts or trims onto metal bodywork without having to screw directly into the metal.

These small white screw grommets are used on several different Alfa Romeo cars. Typical uses include Alfa 147 wheel arch lining clips and Alfa Rome...

These edge clips are normally used on parts such as wheel arch linings, bumpers or underbody shields.

These take an M4 screw and fit into an 8mm square hole. They are a good universal part used to fasten parts or trims to metal bodywork. This partic...

These screw grommets are used on several BMW models for many different parts. Examples include bumpers, splashguards, underbody shields and interio...

This plastic mounting clip with sealing washer is normally used to join bumper covers to the front or rear wings. These clips sit in the metal body...

A small screw grommet or lock nut used on a lot of different Citroen and Peugeot cars. These clips are used all over the vehicles for everything fr...

These screw grommets are used on a wide range of Land Rover models and a range of different purposes from wheel arch linings to A-pillar covers and...

These black plastic locknuts or screw grommets fit into 10mm square hole. The grommet fits into a hole in the metal bodywork and allows a screw to ...

This screw grommet is used on lots of different Toyota cars and all over the vehicles. Fitment uses include sill covers, side mouldings, grilles, b...

These are used on a number of different Toyota cars from the Auris to the Avensis and up the Lexus LFA. They can be used in many different location...

These are a standard screw grommet used to fasten trims and parts into metal bodywork.

These are an aftermarket part equivalent to Jeep part number 46408953. They are used on some Jeep models for mounting parts such as door cards.

These screw grommets have a rubber collar moulded onto the clip to provide a weather tighht seal. These grommets fit into a 8.5mm square hole. They...

Each of these screw grommets includes a sealing washer. The clips are typically used to attach exterior trim panels in position. An example of this...

These screw grommets are used on items such as bumpers and arch linings to secure additional parts and trims.

These plastic screw grommets fit into a 10mm square hole. They are often used by Mazda for door cards and other interior trim panels.

These clips are widely used across the Kia range. They are used to mount parts such as wheel arch splashguards, side skirts, sill covers, bumpers a...

These screw grommets are used for attaching parts such as lamps, bumpers and trim panels.

These parts are used on several modern Toyota vehicles often on exterior parts such as bumpers or exterior trims.

Very common screw grommet or locknut used by Kia across their range of cars. These plastic nuts are used on all sorts of parts such as bumpers, doo...

These screw grommets are used to mount parts onto the bodywork or chassis of the car. These particular clips fit into a 9mm square hole.

These screw grommets are used for mounting parts and trims to bodywork on several BMW models. The clips fit into a 8mm hole and each one includes a...

Common on lots of different Alfa Romeo cars, this screw grommet is used for a range of different items. It's used on interior and exterior trim suc...

These distinctive yellow plastic screw grommets are used on some Fiat models around the bumpers and front and rear wings. The clip fits in a hole m...

This type of part is for mounting trims, panels or parts onto metal bodywork. The grommet fits into a hole in bodywork. The part is then aligned wi...

These screw grommets are common on Fiat cars for attaching and securing the door cards.

These clips are used by Hyundai for mounting parts and trim to the metal bodywork on several of their models. An example use is for the wheel arch ...

These screw grommets fit into a square 9x9mm hole. The part is used with a screw to fasten plastic bumpers, spoilers, headlamps and mudguards onto ...

These yellow plastic screw grommets are used to secure parts such as the bumpers and associated trims on to some modern Jaguar cars and SUVs.

These yellow fasteners are used on the Smart Roadster to secure the front wheel arch lining to the wing and some bumper trims in position.

These are a standard screw grommet used to attach parts or trims onto metal bodywork without having to screw directly into the metal.

These light beige screw caps have an overall diameter of 13.8mm. The centre hole diameter is 4.8mm.

These light grey screw caps have an overall diameter of 14mm. The centre hole diameter is 4.5mm.

These light grey screw caps have an overall diameter of 18mm. The centre hole diameter is 4.5mm.

This large headed screw in clip is used on some VW cars such as the Mk3 Golf. On that car it is used to secure the windscreen cowl in place. The cl...

These parts are used on cars such as the Skoda Citygo. The clips are used for mounting parts such as underbody shields, control modules and protect...

These screw grommets fit into a square 8mm hole. They are very common on modern Hyundai cars and used on almost all models to help fasten door pane...

These grey screw edge grommets or spire clips are used to join parts without necessitating damage to the metal bodywork. This part slides over the ...