Products

These are a very common screw for the interior of Audi cars.

This is an extremely common screw on the interiors of Skoda cars. They are typically used for boot linings, door cards, sill covers, pillars and ta...

Metal spring clips that attach to lugs on interior trim panels. These are used for securing parts on the dashboard and centre console of several Mi...

These clips fit into a 10mm hole and are normally used on Mercedes cars for pillar trims, tailgate trim covers and boot lining panels. The clips ar...

Common on door card panels, pillar trims and headlinings. These clips are a good universal clip and were widely used by Toyota. The clips fit into ...

This part is normally used on interior panels that sit flush against the dashboard or centre console. These trims are sometimes decorative or are u...

These small plastic trim clips are used on interior trim panels and fascias. They are fitted to lugs on the back of trim panels and then they snap ...

These clips come from Honda in white or orange. Our versions are white but they are otherwise identical. The clip is a high quality aftermarket alt...

These metal springs are used to attach interior parts such as the interior pillar covers and door entrance sill trims.

These yellow insert clips are used to attach interior upholstery and trim panels. This includes door cards, side trims and tailgate linings.

These small white plastic clips are used to attach small trim panels. One example fitment is the interior trim cover that is used to cover the wing...

This small white clip is used to attach the interior wing mirror cover trim. This trim is on the inside of the car door and hides the fixings that ...

These clips fit into a grommet mounted in the bodywork. They are used for attaching door cards and interior trim panels onto some Jaguar cars. Each...

These are the exact clips used by Jaguar to attach the side skirts / sill moulding cover onto the R-Sport version of the XE. Jaguar do not sell the...

This bright orange clip is used to hold the bonnet support rod / bonnet stay in position when it's not being used. The clip is used on the Jeep Ren...

Distinctive yellow and white trim clips with a rubber seal that are used to securely mount the front and rear door cards on the Jeep Renegade. The ...

These blue clips are one of the fasteners used on the Jeep Renegade (2015 on) to attach the rear wheel arch trims or flares. Each clip includes a r...

Kia and Hyundai use many different clips that look almost identical to these. The clips are normally colour coded so it's important to check that t...

These clips are used with a snapsac grommet that fits into the bodywork. They are fitted to at least four different Land Rover vehicles and used to...

These are positioning grommets that fit into the bodywork of the car. The tail lights have lugs on them that then fit into these grommets.

These clips are used across the Land Rover range to attach side skirts, radiator grilles, bumpers, undertrays and wheel arch linings. The clips are...

There are lots of variations of the Land Rover Defender but these clips were used quite consistently to mount the interior door trim panels from 19...

This kit of 10 clips contains the parts required to repair or refit the A-pillar trim that runs down the side of the windscreen on some Land Rover ...

These distinctive clips are used to attach the A-Pillar trims that fit either side of the windscreen on the exterior of certain Land Rover and Rang...

These were used by Land Rover to fit Defender interior trim panels. They are a basic fir tree clip and so will also be suitable for other purposes.

These are a very chunky, heavyweight trim clip used to attach the plastic body mouldings onto the side of the L322 Range Rover. The Land Rover part...

These parts are used to position and hold the roof lining in place on the Land Rover Freelander Mk2 (LR2).

Interior trim panel clips used on the Discovery Mk1 and Mk2. These clips work with a snapsac which fits into the metal bodywork. These are specific...

Used to attach exterior pillar trims on several Land Rover models. These small black grommet fit into holes in the bodywork of the main body.

This part is identical to a BMW part and is used on a range of different models. It is also a suitable alternative for Land Rover part number EKM10...

This snapsac insert is used in conjunction with a number of other parts on Land Rover and Range Rover vehicles. The snapsac is pushed into the meta...

A large plastic rivet that fits into a 22mm diameter hole. The push fit fastener is used on models including the Toyota Prius and the Lexus CT200H ...

Used to hold the plastic wheel arch linings / splash guards in place on some models of Vauxhall and Opel vans. The large diameter head is flexible...

These clips fit into a square hole and have a large covering head. The clip is used by VW for securing large plastic trim panels such as windscreen...

These fasteners are typically used around the engine bay on radiator and engine covers or shields.

These plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the correct size hole ...

This twist lock pins pass through a larger clip and the arch lining to secure the lining in position.

These small locknuts are used on the bodywork to attach trim panels and covers. Example uses for this particular clip are on sill covers and door l...

Loctite AA 319 is an adhesive kit for mounting rear view mirrors and glass mounted phone and radio aerials.The adhesive is specially formulated to ...

These are used on several Honda models to attach bumpers, side skirts, radiator grilles and underbody shields. The clips are a simple 10mm push fit...

These long fir tree clips are used on some models of the Renault Kadjar to secure trim panels and carpet in the boot area. They fit into an 8.5mm h...

These long clips are used to attach upholstery and carpet in popular Nissan models such as the Qashqai. The clip has a long 40mm stem and fits into...

These are a long stemmed fir tree clip and normally used for interior trims and panels in off road and commercial vehicles. They are used on a numb...

These dark grey plastic rivets fit into an 8.5mm hole and are perfect for VW and Ford van linings. The clips are long and suitable for thicker ply,...

These light grey plastic rivets fit into an 8.5mm hole and are perfect for VW and Ford van linings. The clips are long and suitable for thicker ply...