Products

These are a universal product suitable for any car requiring these dimensions. The clip helps safely route wiring looms, cables or brake hose to pr...

These distinctive, pale blue clips are used on some models of the Nissan X-Trail to attach the side moulding strips on to the exterior of the car. ...

These small clips are used on lots of different Mercedes models. The lower weatherstrip clips are used on some models of the SLK, CLK, E-Class and ...

These are a very common size of body screw across all manufacturers. We list them here for BMW equivalent to their part number 07147129160. They ar...

A common bolt used across the VW range for items such as hinges, wings and other bodywork.

These are a standard, steel M6 bolt with a captive washer. They are used for securing body panels such as outer wings.

These fir tree clips are used to secure the under bonnet sound proofing insulation on most Mazda cars since around 2003. The clips fit in a 5.5mm h...

These distinctive white trim clips are used on the first generation of the Mazda CX-5 to secure the plastic trim that runs around the edge of the w...

This interior trim panel clip is widely used by Mazda. The clips are normally used on door cards but will also be found on boot linings, pillar tri...

These rectangular collared retaining clips are normally used for the foam bumper impact absorption panels fitted behind the bumper covers.

These grey fasteners have a large rectangular collar. They fit into a 10mm hole and expand when the centre pin is inserted. They are used to attach...

This clip is very widely used across the Mazda range. It is used on everything from interior trim panels to bumpers, engine bay shields and wheel a...

These green plastic moulding clips come with foam sealing washers. They are an identical and high quality alternative to the genuine Mazda part num...

A common clip used by Mazda for attaching side skirts, sill mouldings and other plastic trims around the vehicle. These are very common on side ski...

These small plastic clips are used on weatherstrip seals and rubber aperture seals. The clip head fits inside the rubber seal and then the stem of ...

Expanding screw fit rivets such as these will normally be used wheel arch linings, bumpers, under trays and sill mouldings.

Interior door and trim panel clips commonly used by Mercedes. They can found on a range of different models and often used for different purposes i...

Widely used across the Mercedes-Benz range of cars and vans, these are very simple push pin plastic rivets. They are fitted to Mercedes upholstery ...

These clips are used to attach the protective plastic moulding trim panels that are fitted to the exterior of some models of Mercedes-Benz Sprinter...

Used as interior door card and tailgate lining trim clips on a number of different Mercedes-Benz cars and commercial vehicles.

Fitted to several Mercedes-Benz cars and commercial vehicles, these plastic push fit rivets have a wide collar and are normally used on loose fitti...

These push fit expanding plastic rivets are used on many different Mercedes models. The clip fits into a square or rectangular hole and the centre ...

These are small push pin plastic rivets used on some Mercedes-Benz cars, vans and commercial vehicles. They are used for lightweight trim panels an...

These bolts have a ridged edge that secures into a sprung nut. This type of fasteners is normally used on undertrays, bumpers, arch linings and oth...

These are used with a sprung nut that hold the bolt in place and secures the panel that it is securing. Both can be easily lost or knocked off. The...

These metal spring clips are used to hold interior trim and fascia panels in position around the dashboard.

Small metal edge clip normally used by SEAT for screwing in bumpers and arch linings.

Small, black metal edge clips used to fasten plastic parts such as wheel arch linings and wheel arch trims. The clip fits over the edge of two piec...

These metals fasteners are typically used on older models to attach trim panels and door cards to the interior of Volvo cars

These metal clips are used to attach interior trims and fascia panels around the dashboard, centre console, door pillars and boot lining. They are ...

There are two very similar clips used by Audi on most of their models. This version is 22mm long and there is also a 16mm version (Our part number ...

There are two very similar clips used by Audi, Seat, Skoda and VW on most of their models. This version is 16mm long and there is also a 22mm versi...

There are two very similar clips used by Audi, Seat, Skoda and VW on most of their models. This version is 16mm long and there is also a 22mm versi...

There are two very similar clips used by Audi, Seat, Skoda and VW on most of their models. This version is 16mm long and there is also a 22mm versi...

There are two very similar clips used by Audi, Seat, Skoda and VW on most of their models. This version is 16mm long and there is also a 22mm versi...

These metal spring clips are used on many different Mini models to secure interior trim panels. They are found on parts such as door cards, dashboa...

These spring clips are normally used on narrow trim strips on the inside of the vehicle. Examples include pillar trims, roof linings and tailgate l...

These clips are used on parts such as pillar covers and tailgate linings. The metal clip fits onto a lug on the trim. The lug and metal spring clip...

These metal clips are used with screws to attach parts such as underbody shields, engine undertrays and wheel arch linings.

These clips mount onto the bodywork or trim and allow a twist lock bolt to be secured. These are often used on removable access panels such as unde...

These clips mount onto the bodywork or trim and allow a twist lock bolt to be secured. These are often used on removable access panels such as unde...

These steel fasteners are used to attach some exterior trim and body parts such as bumpers and radiator grilles.

Metal speed nut used for securing plastic arch linings and underbody trim in position.

These metal nuts are very widely used on the SEAT range to secure parts such as arch linings, undertrays, sill covers and bumper trims.

These metal nuts are very widely used on Skoda vehicles. Typical usage examples include for parts such as arch linings, undertrays, sill covers and...

These metal nuts are very widely used on Volkswagen cars and vans. The metal fastener is used to secure parts such as arch linings, undertrays, sil...

These metal fasteners are used with screws and are normally found on underbody shields and trim covers. They are to secure items such as engine und...

There are two very similar clips used by Volkswagen on many of their cars and commercial vehicles. This clip is 22mm long and there is also a 16mm ...