Products

Fitted to at least 9 different Subaru models since 2011, this 8mm black plastic push fit trim clip is normally used on the wheel arch linings. The ...

These plastic nuts are used on some Land Rover vehicles to hold the splashguards or wheel arch linings in position. The 10mm nuts are unthreaded an...

These 8mm push fit clips have a distinctive oval shaped head that pushes in to expand the pins and hold in place. The clips are used on some Ford m...

Large headed fir tree clips that are used to hold the splash shields or wheel arch linings in place on several Nissan models. The clips have a 35mm...

These clips join the wheel arch lining or splashguard to the wing. The clips fit along the edge of the lining and then allow it to be screwed onto ...

A black plastic push nut used on many modern Kia vehicles to secure the arch linings into position. The nut is not threaded but instead has barbs t...

These plastic clips are normally used to secure wheel arch linings or other plastic trim panels in position. The clip pushes through the trim and i...

These small plastic fasteners are used on the inner wing lining on a large number of Audi vehicles. The clip is used in conjunction with a metal T-...

These small plastic fasteners are used on the inner wing lining on a large number of VW cars and vans. The clip is used in conjunction with a metal...

These two part push fit clips are made from metal and plastic. The clips are typically used on parts such as wheel arch linings or for other trim p...

These two part push fit clips are made from metal and plastic. The clips are typically used on parts such as wheel arch linings or for other trim p...

This clip pushes into an 8mm square hole and is normally used to hold flexible panels such as wheel arch linings and splash guards. The centre hole...

These pin retainer clips are used on several modern Honda models to secure the wheel arch lining in position. The pin pushes into a retainer and cl...

These black plastic nuts push onto a 5mm diameter stud in the wheel arch. They are used on the front and rear arches of several Hyundai models.

This is a standard screw grommet used for securing panels, trim or hardware onto metal bodywork. They are common on all pieces of interior trims an...

These distinctive plastic clips fit into a square hole and are normally used on the wheel arch linings.

Used on many modern Renault vehicles from new and also a supersession for parts used on older models such as the Renault 5. These clips push onto a...

These small plastic clips fit onto threaded or barbed studs in the wheel arch. The clip push down over the stud and scures the arch lining in posit...

These distinctive clips are used to hold and secure the splash guard liner around the wheel arch.

Fitted to several Mitsubishi models, these clips are used for multiple purposes. They are found on wheel arch linings, bumpers, splashguards and in...

These clips are pushed onto on a metal bodywork stud. They are normally used on plastic parts such as arch linings, splashguards or shields.

Used on several Mini car models, these plastic screw to fit clips are used on large trim panels such as bumpers, sill covers and underbody shields....

These small black clips are used on some Honda models to attach the plastic trims that run around the edges of the wheel arch. This clip has Honda ...

These small trim clips are used by Nissan and Infiniti for attaching the plastic surround on the wheel arch. They are used on the front and the rea...

These small trim clips are used by Nissan and Infiniti for attaching the plastic surround on the wheel arch. They are used on the front and the rea...

These small, white plastic trim clips are used to secure the wheel arch flares and small trim mouldings to the bodywork on some Citroen cars and va...

These small white snap fit clips are used on several Peugeot models. They are used on the Peugeot 208 (2019 on) to attach the exterior wheel arch t...

One of many clips used for attaching the side mouldings and trims on to various Toyota models including the Land Cruiser Prado. There are a lot of ...

One of many clips used for attaching the side mouldings and trims onto various Toyota Land Cruiser models. There are a lot of different clips used ...

this grey plastic grommet fits into the metal bodywork of the vehicle. A second clip attached to the wheel arch flare or wheel arch trim is then pu...

These white plastic trim clips fasten onto the body of the Volvo C30. The ball of the clip is on the outside and allows for the arch trim to be cli...

These small clips are used on the front and rear wheel arch of the 8th generation Honda Civic (2005-2011) and the 3rd generation Honda CR-V (2007-2...

These circular plastic clips look like pulley wheels and are used to attach the wheel arch flare trim to several modern Mini cars.

Common across many of the modern Minis, these clips are used to attach the exterior trim mouldings around the wheel arches, sills and bumpers.

These rectangular screw mounted reflectors are suitable for trailers, caravans or other vehicles. The reflector has holes enabling it to be mounted...

These rectangular self-adhesive reflectors are suitable for trailers, caravans or other vehicles. The reflector requires a flat, clean surface to e...

These circular reflectors have a hole in the centre for mounting with a screw and are suitable for trailers, caravans or other vehicles. White refl...

These circular reflectors have a hole in the centre for mounting with a screw and are suitable for trailers, caravans or other vehicles. White refl...

These 60mm circular reflectors are pre-fitted with a threaded bolt which is mounted to the rear and allow the reflectors to be securely fitted to b...

Our reflectors are produced in Austria by one of Europe's biggest brands. They are all road legal and E-Approved. This means they are suitable for ...

These small white trim panel clips are used on several Mitsubishi cars to secure small trim panels in position. Examples uses include Pajero or Sho...

These rectangular screw mounted reflectors are suitable for trailers, caravans or other vehicles. The reflector has holes enabling it to be mounted...

These rectangular self-adhesive reflectors are suitable for trailers, caravans or other vehicles. The reflector requires a flat, clean surface to e...

Our reflectors are produced in Austria by one of Europe's biggest brands. They are all road legal and E-Approved. This means they are suitable for ...

These rectangular screw mounted reflectors are suitable for trailers, caravans or other vehicles. The reflector has holes enabling it to be mounted...

These rectangular self-adhesive reflectors are suitable for trailers, caravans or other vehicles. The reflector requires a flat, clean surface to e...