Products

This clip is used on some of the Peugeot models such as the 4007. On that model, it is used to fasten the wheel arch liners or splash guards in place.

These are used on the Toyota Corolla, Supra and Celica for interior panels such as the boot ling as well for the radiator grille cover, bumpers and...

These clips are common on dashboard panels and other interior trims. The clip fits into a 7 x 7mm square hole and is used on a number of different ...

These small, black plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the corre...

identical specifications and equal in quality to the OE Toyota parts, these clips are a fraction of the cost. The clips are used to attach fabric i...

A simple push button clip used to retain the bonnet insulation and sound deadening fabric panels fitted to the underside of the bonnet.

Bonnet insulation is the sheet of fabric that is often fitted to the underside of the bonnet. On many Citroen cars and vans, this clip is used to s...

Used to secure the fabric sound insulation that is fitted to the underside of the bonnet on some Citroen cars and vans.

These barbed clips secure the fabric insulation panel that is mounted to the underside of the bonnet on some Peugeot cars and vans.

This small plastic clip is used on several Land Rover models to secure the insulation to the underside of the bonnet.

These button clips are used to hold the sound insulation onto the underside of the bonnet.

These clips are used to route the bonnet release cable on most modern Honda cars. The clips close around the cable and then clip into a 7mm hole.

This small and distinctive black plastic trim clip is used to attach the rubber seal in place that runs along the front and rear of the bonnet. The...

These small black plastic trim clips are used by SEAT to attach trim covers such as the top bonnet trim to the SEAT Leon Mk2.

These small clips push into a 7mm hole and the fin lock the clip in place. They are typically used by Toyota for small, light trim panels such as a...

These small clips are ideal for motorcycle fairings or lightweight interior trims. The clips fit into a 7mm hole and when the centre pin is pushed ...

These clips are a good alternative to the Land Rover part number YOO5098. The clip is used by Land Rover to attach windscreen cowls and interior tr...

These fir tree clips fit perfectly in Land Rover Defender headlinings. If the headlining is recovered or insulated and you need longer clips, these...

These small, black fir tree clips fit into a 7mm hole. They are used for interior and exterior trim and also for shield and covers within the engin...

These clips are simple barbed fasteners that are used on a range of vehicles to secure trim such as splash guards, wheel arch linings, boot linings...

These clips are simple barbed fasteners that are used on a range of vehicles to secure trim such as splash guards, wheel arch linings, boot linings...

This fir tree style clip has a distinctive head with a cut out portion. The clip is used on a number of different Lexus and Toyota vehicles on upho...

These are a trim panel and body moulding fastener used by Ford on some cars and commercial vehicles.

These grey plastic fir tree clips are one of the types of clip used to secure the headlining above the cab on the Mk7 Transit.

This clip fits into a 7mm hole and has a large 30mm diameter head. The head of the clip is gloss black so gives a prestige look when used on bonnet...

These small plastic fir tree clips are perfect for holding panels or trims in place. They fit into a fairly small 7mm hole but the wide 24mm diamet...

These small, grey plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the correc...

These round headed, plastic button clips push through the rubber seals at the front and rear of the bonnet to fix them in place. They are used on s...

These large headed button clips are normally used on insulation or upholstery panels. The clip fits into a 7mm diameter circular hole in the bodywo...

These white plastic trim clips are used on trim panels such as door sill covers and interior pillar covers.

Used for a range of interior trim panels such as the pillar covers, headlining and tailgate trim covers. Each clip includes a pre-fitted sealing wa...

These were used by Land Rover to fit Defender interior trim panels. They are a basic fir tree clip and so will also be suitable for other purposes.

These fasteners are typically used around the engine bay on radiator and engine covers or shields.

These are used on many different cars made by Nissan. The clips are normally used for mounting tail lights, number plate strips and other parts tha...

These clips fit into the tailgate either side of the rear window. The parcel shelf string attaches to this clip and then the shelf lifts when the b...

These clips fit into the tailgate either side of the rear window. The parcel shelf string attaches to this clip and then the shelf lifts when the b...

These push in clips are fitted to the tailgate. The parcel shelf string attaches to these clips so that when the boot is opened, the parcel shelf l...

One Peugeot's bonnet insulation clips, this particular size is used on the 1007, 206, 207 and some of the Partner vans. The clip is a simple button...

These small plastic fir tree clips are perfect for holding panels or trims in place. They fit into a fairly small 7mm hole but the wide 24mm diamet...

This is an expanding push fit clip used by BMW for attaching sound deadening panels, upholstery and carpet to various models within their range. Th...

This is an expanding push fit clip used on several Mini cars for attaching sound deadening panels, upholstery and carpet to various models within t...

A standard plastic fir tree clips that fits into a 7mm hole. These clips are used to secure interior trim panels such as boot linings and interior ...

These fasteners are typically used around the engine bay on radiator and engine covers or shields.

These plastic rivets expand when the centre pin is pushed in. The clips are normally used for wheel arch linings but are also found on engine bay s...

These push fit plastic automotive clips are used by Toyota and Lexus on a number of different models. The clip fits into a 7mm hole and has a mottl...

These are a standard yellow plastic trim clip used by Jaguar for some interior trim panels and mouldings. The clips slides into position on the bac...

These large headed black plastic rivet are used on large trim items such as bumper covers, sill mouldings and wheel arch linings.