Products

These clips are used on lots of different Land Rover vehicles from the MK2 Discovery up to the current Range Rovers. They are typically used as whe...

Often used on wheel arch linings or splash guards, these clips are also fitted to upholstery panels such as boot linings and bonnet insulation.

These black fir tree clips fit into a 7mm hole. The plastic clips are used on cars such as the Ford Mondeo, Focus or Fiesta. The fastener is normal...

These single use 7mm black fir tree clips are used by Audi on several different models. The clips are black with a 20mm diameter head. They are use...

These single use 7mm black fir tree clips are used by Seat on several different models. The clips are black with a 20mm diameter head. They are use...

These single use 7mm black fir tree clips are used by VW on several different models. The clips are black with a 20mm diameter head. They are used ...

This clip is used on some Peugeot cars and vans to secure trim panels and upholstery. Typical uses include boot carpet lining, bonnet soundproofing...

This wide collared 7mm screw fit clip is used on some Toyota models to secure panel in position. This can include seat backs and bases, boot lining...

These 7mm plastic trim clips are used by Subaru on a number of different models including the Forester, Impreza, Legacy and BRZ. The clips fit into...

This clip fits into a 7mm hole and expands when the centre pin is inserted.

These fir tree clips are used on interior and exterior panels including windscreen cowls, boot linings and bonnet insulation panels.

These fir tree clips fit a 7mm hole and are used by Fiat on many different vehicles. Typical uses include bonnet insulation and sound deadening pan...

This long fir tree clip fits into a 7mm hole. The clip is used on many different BMW models to secure the seat backs onto the frame. It is also use...

These single use 7mm black fir tree clips are used by Skoda on several different models. They are used as Skoda Octavia luggage compartment trim cl...

These black fir tree clips are used on all models of the Land Rover Defender from 1987 onwards. They are used as the bumper end cap clips and also ...

These grey fir tree clips are a perfect for for the headlining of the Land Rover Defender, P38 Range Rover and Discovery 1 and 2. We also have them...

This wide collared trim is used on loose fitting trims and insulation panels. It is common on interior carpet linings, bonnet insulations and other...

Fitted to the Citroen C1, these clips are normally used by Toyota. These cars were designed and manufactured with Toyota and so some parts are now ...

These are one of our best-selling Toyota clips. They are used on lots of different Toyota and Lexus models. Often used for engine bay shields, the ...

These 7mm plastic rivets are used on some modern Toyota models. In particular they are the Toyota RAV4 front grill clips (Mk4 2013-2018). The clips...

This is an equivalent to the Jaguar part C2S9354020. The screw rivet fits into a 6.5mm hole. When the centre pin is pushed in, the clip expands to ...

These clips are used to attach various trim and protective panels in and around the engine bay and underside of the car. They are quite distinctive...

These small, 7mm black plastic trim clips are used by Toyota on a number of different cars. The clips are a standard push-fit plastic rivet style f...

A standard and simple 7mm push fit black plastic rivet. These simple clips expand when the centre is pushed in and the clips lock in position. This...

These wide collared plastic push fit trim clips are used on some of the latest Alfa Romeo models including the Stelvio and the Giulia. The clips ar...

These 7mm clips are normally used on the wheel arch linings or splashguards.

These push fit plastic rivets are used to clip on insulation, trim panels and shields. The clips are used on several modern Mercedes models but the...

These are one of our best-selling Lexus clips. They are used on lots of different Toyota and Lexus models. Often used for engine bay shields, the t...

These simple push fit plastic rivets expand to lock in position when the centre pin is inserted. They are used by Volvo on several models. A common...

A simple push fit plastic rivet that expands when the centre pin is pushed in. To remove the clip, push the centre pin through further and the clip...

This is common wheel arch lining, engine shield and side skirt clip used by Suzuki on models such as the Swift and Jimny. The clip fits into a 7mm ...

These are used on many Toyota models to secure small or lightweight trim panels such as windscreen cowls, pillar trim covers, boot lining panels an...

These are common undertray, splash shield and wheel arch lining clips used on several modern Toyota models. The are used on the latest RAV4 as well...

These clips fit into a 7mm hole. They simply push into the hole and expand to lock in position when the centre pin is inserted. This clip is used b...

These plastic rivets fit into a 7mm hole. They are used on some Toyota vehicle to attach parts such as bumpers, wheel arch linings and underbody sh...

These are more commonly found on Toyota cars but are also used by Citroen on vehicles that they have produced in collaboration with the Japanese ca...

These are more commonly found on Toyota cars but are also used by Peugeot on vehicles that they have produced in collaboration with the Japanese ca...

Fitted to the Peugeot 107 and 108, these clips are normally used by Toyota. These cars were designed and manufactured with Toyota and so some parts...

A simple push-fit plastic rivet which expands and locks in position when the centre pin is inserted. These fasteners are used across the Lexus rang...

These 7mm plastic rivets are typically used on trim such as windscreen cowls, engine bay shields and parts such as the air intake. The part is also...

A simple 7mm push fit used on different types of trim panel and mouldings by Mitsubishi.

There are several Toyota clips that all look quite similar to these. It's important to check the measurements and part number before you order. Eac...

These black plastic expanding trim clips fit into a 7mm hole and the clip locks in position when the head is pushed down. The larger 25mm domed hea...

These 7mm clips are used on modern Subaru models including some models of the Subaru Legacy, Outback and Impreza. The engine bay clips are used to ...

A simple push pin expanding rivet for use in a 7mm hole. This clip is used to secure trim panels. When the centre pin is pushed in, the stem of the...

These are often found in boot linings, dashboard covers, and access panels around the interior or engine bay of the vehicle. They fit a 7mm hole an...

These expanding plastic rivets are used on several models of Mini. The wide collared clips are normally used to hold flexible panels such as bonnet...

A standard expanding plastic rivet used on the wheel arch linings of some modern Citroen and Peugeot cars. The clip fits into a 7mm hole.