Products

These small fir tree clips are fitted to some models of Tesla and used to secure trim. One example is to attach the trim inside the frunk (front lu...

These sprung head push fit trim clips are used on all versions of the Tesla Model 3 to attach the door cards. The clips push in and expand when fit...

Plastic nuts used by BMW to secure loose trim items such as wheel arch linings and under body shields.

This part is often used by VW on wheel arch linings, bumpers and wings. The plastic nut has a 22mm collar.

These threaded nuts are typically used around the rear bumpers to secure brackets and mouldings.

These Torx head bolts are used on several Citroen models for securing bumpers and other major body parts.

These Torx head bolts are used on several Peugeot models for securing bumpers and other major body parts.

These M5 screws are common across the Audi range and often used on wheel arch linings or for interior trim panels.

These M5 screws are common across the VW range and often used on wheel arch linings, bumpers or for interior components and trim panels.

This is a common screw used on body parts and trim such as wheel arch linings and bumpers.

These Torx screws are used all over modern Skoda vehicles. The parts are used for underbody shields, bumpers, arch linings, splashguards, interior ...

These torx headed screws are extremely common exterior trim fasteners on modern Skoda vehicles. The screws are used to secure parts such as wheel a...

These screws are very common on wheel arch linings, bumpers and other shields.

These Torx headed screws are used to secure a range of parts onto modern Ford vehicles. They are common on engine undertrays, wheel arch linings, b...

This screw is used on many different cars and throughout the bodywork. The clips are used for a wide range of purposes such as underbody shields, b...

Common screw used across the VAG group for items such as wheel arch linings, undertrays and interior trims and panels.

These twist lock clips are used to attach the tow eye covers on some Land Rover and Range Rover vehicles. The clips twist to lock the cover in plac...

This is a quarter turn clip that holds trim covers in place on a number of different Range Rover and Land Rover models. The clip pushes in and twis...

This plastic washer is used with twist lock bolts and act to hold the removable covers in place onto rear bumpers of several Audi cars. The covers ...

These are a 7mm standard push fit rivet that expands and locks when the centre pin is pushed in. They are used on several different Toyota models i...

A 9mm push fit bumper clip that is used on a number of different Toyota vehicles. This is similar looking to other Toyota clips so we recommend che...

This type of clip is normally used on shields such as wheel arch liners, bumper trims, side skirts and mudguards.

These small clips are used along the inner edge of the bonnet tip or base to attach the rubber seal. They are used on a number of different Toyota ...

These push fit plastic fasteners are used on a few different Toyota and Lexus models. They are typically used to attach side skirts, bumpers and wh...

This clip is widely used by Toyota. It has been for the last 30 years and continues to appear on new models. It can be found in a variety of locati...

These are used on many different Toyota and Lexus models. The clips are normally used on engine bay shields or engine covers.

Most often used by Toyota on wheel arch linings and shields, these clips are just a simple plastic rivet that can be used on all sorts of trims ins...

These parts are used to attach seals and trim around the doors on some modern Mini cars.

This distinctive fastener is used to mount the door sill trim cover on several different models of Skoda.

These unthreaded plastic nuts are used to secure protective shields and trims to the bodywork on several SEAT models.

These nuts are used on some models of the Mini R50, R52 and R53. The clips are typically used on trim panels and parts. An example use is to attach...

These are used on just a few Vauxhall vehicles. They are suitable for many purposes but are used by Vauxhall as undertray panel clips and upholster...

This is a plastic insert clip with a rubber grommet. The clip is used on some Tesla models such as the Model 3. They are used in and about the fron...

A distinctive interior trim clip with pre-fitted metal spring. These clips are normally used on plastic trim panels such as pillar linings, tailgat...

These unusually short black plastic trim clips fit into an 8mm hole and are used to attach trim mouldings and panels in position on several Mercede...

These black retainers are used to secure trim in position. Some Renault models use them to help secure the windscreen cowl. This trim sits below th...

These clips are used on pillar trims across a lot of the VW, Audi, Seat, Skoda and Porsche ranges. There is an identical clip available in white al...

These black retainers are used to secure trim in position. A common fitting location is for the windscreen cowl. This is the trim that sits below t...

Used to attach windscreen cowls, heat shield insulation and interior boot and carpet linings, these black trim clips are normally found on older Pe...

These are very widely used on modern Renault and Dacia vehicles. The trim clips push onto a metal stud and are used to pin down carpets, fasten whe...