Products

These distinctive looking car clips are used on door rubber seals, boot seals and engine bay seals. The plastic clip has a long and thin collar whi...

These rubber inserts are used with other fasteners and provide a seal and firm hold into the bodywork. This part is widely used across the Volkswag...

These rubberised inserts are normally used with part number FCP-0400 to attach parts such as side skirts, door mouldings and wheel arch flares.

These are used for attaching rubber seals to apertures on several Honda cars. They are normally used on the rubber seals at the front or rear of th...

These are a small black plastic clip used to attach rubber seals around the door openings on some Peugeot models. The fasteners have a flat head wh...

These clips are used to attach the rubber weatherstrip seals around the door openings on some models of the Ford Galaxy.

A small push fit clip used on some SEAT car models to attach and secure the rubber weatherstrip that runs around the door apertures.

Used to attach rubber weatherstrip seals around apertures such as bonnet and door openings.

These plastic clips are used on older VW cars such as the Mk2 Golf and Jetta. The clips are used to attach the rubber seal that runs along the edge...

These clips are a perfect fit to replace any damaged or missing fasteners on the Qashqai lower door seals. The rubber strip runs along the bottom o...

These black rubber grommets are used in conjunction with other clips to mount parts such as wheel arch flares, side skirts, sill mouldings and pill...

These retaining clips are normally used on the underside of the rear bumpers to secure the trim and underbody panels. The clips are a high quality ...

Common and widely used screw fit plastic fastener. Ford use these for shields, splashguards and other trim panels.

These are very common clips used on many different Kia cars. The clips are used to attach parts such as undertrays, windscreen cowls, side skirts, ...

These screw fit clips are used by BMW to secure the windscreen cowl onto several of their models. This is the part below the windscreen that typica...

These 8mm screw fit fasteners are used on some Volvo models for underbody panels and engine bay shields. The expands when the centre pin is pushed ...

These were used by BMW on several older models. They are a strong clip and so were typically used for larger trim panels such as bumpers, sill moul...

These are generic plastic screw rivets (also known as scrivets) suitable for a 6.5mm hole. When the centre pin is pushed or screwed in, the clip ex...

These are one of the most widely used Hyundai plastic trim clips. This part is fitted to many different models and is a very common 8mm clip used o...

A 6mm plastic clip used for fastening lightweight trim panels and shields.

This clip is used on a lot of different BMW and Mini cars produced from 2000 onwards. The clip is used for many different purposes including interi...

This clip is used on a lot of different BMW and Mini cars produced from 2000 onwards. The clip is used for many different purposes including interi...

This is a part used by Ford and is also a good universal trim clip. The shaft is quite long and suitable for thicker panels and heavy duty uses suc...

These distinctive expanding plastic rivets are fitted to several Land Rover models including the Freelander Mk1. That model uses them on the wheel ...

These are very widely used across the Ford range since the 1990s. The clip is common on a lot of Ford models and is a utility clip used to fix anyt...

Peugeot use these parts on some of their interior trims and also on bumpers. The clip has a distinctive Torx head.

These black plastic locknuts or screw grommets fit into 10mm square hole. The grommet fits into a hole in the metal bodywork and allows a screw to ...

These are used on a number of different Toyota cars from the Auris to the Avensis and up the Lexus LFA. They can be used in many different location...

These clips are widely used across the Kia range. They are used to mount parts such as wheel arch splashguards, side skirts, sill covers, bumpers a...

These screw grommets are used to mount parts onto the bodywork or chassis of the car. These particular clips fit into a 9mm square hole.

This type of part is for mounting trims, panels or parts onto metal bodywork. The grommet fits into a hole in bodywork. The part is then aligned wi...

These clips are used by Hyundai for mounting parts and trim to the metal bodywork on several of their models. An example use is for the wheel arch ...

These screw grommets fit into a square 9x9mm hole. The part is used with a screw to fasten plastic bumpers, spoilers, headlamps and mudguards onto ...

This large headed screw in clip is used on some VW cars such as the Mk3 Golf. On that car it is used to secure the windscreen cowl in place. The cl...

These parts are used on cars such as the Skoda Citygo. The clips are used for mounting parts such as underbody shields, control modules and protect...

These plastic clips have a coarsely threaded plastic screw on one side which cuts directly into the interior carpet of the vehicle. The other side ...

Very common on modern BMW tailgate or boot hatches, these expanding lock nuts are used to attach the plastic trim covers. This part fits directly i...

These clips are pushed into square holes and click in place to hold wheel arch linings, sill trims and engine shields. The clips can also be used a...

The clips screw into the main carpet of the vehicle. The other side of these clips include the coarser half of a hook and loop fastener (Velcro-sty...

These 8mm plastic push rivets are commonly used to fasten engine bay shields, bumpers or wheel arch linings.

These clips are used across the Volkswagen Group. They are used on several Seat cars for attaching large trim panels such as underbody shields, arc...

This sprung clip is very simple. The clip squeezes together to be fitted and expands once it is in place. It is used on a large number of different...