Products

Black plastic nut with a 22mm collar, equivalent to Audi WHT003207. Used across a wide range of Audi models to secure wheel arch linings, mudguards...

A black plastic nut with a 22mm collar, equivalent to Fiat part number 50504884. This type of fastener is commonly used to secure underbody insulat...

This black plastic nut with a 22mm collar is used to secure underbody and arch lining panels in position. The OE part number is Jeep 50504884.Fitme...

An unthreaded plastic nut used for items such as bumpers, wheel arches and engine bay shields. These nuts are fitted to a coarsely threaded metal s...

This type of unthreaded plastic nut is normally used on a coarsely threaded stud attached to the bodywork. The nut cuts a thread as it is tightened...

Plastic unthreaded nut used for various purposes and widely across the BMW range. They are not threaded inside and so normally tighten onto a coars...

These fasteners are an unthreaded nut used for various purposes within the Mercedes-Benz range. They are not threaded inside and so normally tighte...

Plastic unthreaded nut used for various purposes and widely across the Mini range. They are not threaded inside and so normally tighten onto a coar...

This is a universal use black plastic rivet suitable for a 5.5mm or 6mm hole. The clip can be used for a wide range of purposes such as attaching i...

These black 5.5mm expanding plastic rivets are used by Vauxhall for bumpers, bonnet insulation, shields and trim panels. These clips are an afterma...

These fasteners are typically used around the engine bay on radiator and engine covers or shields.

These distinctive clips are used on some Volvo models to attach the side skirts or sill trims. The clip fits into an 11mm hole and expands when the...

This 8mm clip is very quick and easy to install and remove. They are often used for panels where access may be required such as wheel arch linings,...

These plastic rivets expand when the centre pin is pushed in. The clips are normally used for wheel arch linings but are also found on engine bay s...

This positioning pin is used for fitting the rear bumpers to the Nissan Pathfinder, Armada and the Infiniti QX56. The pin is distinctive looking an...

These nuts have an unthreaded internal diameter of 3.9mm. The parts are normally fitted onto a coarsely threaded stud and the thread is cut into th...

This part is used on several Fiat models to attach and secure the plastic cowl at the base of the windscreen. The clips push to fit and each one in...

This clip is very widely used across the BMW range. It is used for a lot of different purposes. Some of the parts this clip is used with include si...

Fitting into a 6.5mm hole, these clips are used on several BMW models. The clip is a simple push pin plastic rivet that is used for bumpers, wheel ...

Plastic screw fit rivets that expand when the centre pin is pushed or screwed in. This clip has a mottled patterned head and is used on several old...

Plastic screw fit rivets that expand when the centre pin is pushed or screwed in. This clip has a mottled patterned head and is used on several old...

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

These small plastic grommets or lock nuts are used on a range of different vehicles within the VAG group. They are used in a number of different pl...

These bodywork screw grommets are found on old and new VW cars and commercial vehicles. Example uses include Mk2 Golf wheel arch lining clips, Mk3 ...

These plastic screw grommets are used around the wheel arch lining and for wheel arch trims on a number of Nissan and Infiniti cars. They are used ...

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

These are very widely used across the VAG group. The grommet is used on a large number of parts including around bumpers, sills, side skirts, wheel...

A common screw grommet fitted to many Audi vehicles. The clip is used throughout and example uses are wheel arch linings, pillar trims, door cards,...

These are widely used across the Citroen and Peugeot range. The clip is oval shaped and is used all over the vehicles. The shape of the clip allows...

Used on several VW cars and vans, these are also a good universal screw grommet for mounting and joining parts and panels.

This is a standard plastic spire clip that will normally be used for securing parts to bodywork. They're commonly used to attach plastic bumper cov...

These clips are used around the edges of the wheel arch. They mount onto the lip of the wing and then the plastic wheel arch liner is attached when...

These clips are extremely common across the Toyota range. The clips are normally used around the edges of the wheel arch. They mount onto the wing ...

These fasteners are used to join trim panels such as wheel arch linings to the metal wing.

This black nut fits on a barbed or threaded stud. The part has a wide collar and is normally used to fasten insulation, heat shields and upholstery...

These clips are used the attach various trims to several different BMW models. The clip has a large head and is screwed into position to hold under...

These push fit plastic automotive clips are used by Toyota and Lexus on a number of different models. The clip fits into a 7mm hole and has a mottl...

Plastic trim clip for securing weatherstrips and rubber seals on Lexus bonnet areas. This fastener corresponds to Lexus part 90467-08011 (904670801...

This plastic automotive rivet is extremely common across the Volvo range. The clip is used for a wide variety of purposes including for bumpers, si...

A simple and small screw clip often used on wheel arch linings, splashguards and engine shields.

These unusual clips have an octagonal collar. They fit into a 10mm and are suitable for larger panels such as bumpers, side skirts, sill mouldings ...

A popular clip fitted to many different models produced by Nissan. Typically used on door cards, tailgate lining and interior fascia panels and tri...

These distinctive clips attach roof lining panels, interior pillar covers and other trim panels onto several Seat models.

These distinctive clips attach roof lining panels, interior pillar covers and other trim panels onto several Skoda models.