Products

Common Honda bonnet insulation fastener used across many of their range of cars.

A standard 8mm push fit plastic rivet used for attaching interior and exterior trim panels such as wheel arch linings, boot linings, engine bay shi...

These clips are used on some Honda models, normally to attach the bumper corner to the wing. It is a simple screw grommet that allows parts to be m...

These are a simple clip to push in and lock in place trims, covers and seals.

These are distinctive clips used to fasten bonnet or hood insulation panels. They simply push through and click into place to secure the fabric ins...

An 8mm screw fit plastic rivet with a 20mm collar. These are fitted to some Honda cars on interior and exterior trim panels such as bumpers, wheel ...

These round headed, plastic button clips push through the rubber seals at the front and rear of the bonnet to fix them in place. They are used on s...

This small screw fit rivet is used in a 6mm hole. It is used on several Honda vehicles including the DA5 and DA7 Integra where is used to attach th...

These simple push fit clips are normally used to attach the windscreen cowl that runs along the bottom of the windscreen and covers the windscreen ...

These push fit plastic rivets with foam washers, are used on some Honda vehicles to attach the windscreen cowl. This is the piece of plastic trim t...

Indasa double sided moulding tape is a high quality tape for professional use. The 0.8mm thick foam tape has a strong adhesive to firmly bond mould...

Indasa double sided moulding tape is a high quality tape for professional use. The 0.8mm thick foam tape has a strong adhesive to firmly bond mould...

Indasa double sided moulding tape is a high quality tape for professional use. The 0.8mm thick foam tape has a strong adhesive to firmly bond mould...

Indasa double sided moulding tape is a high quality tape for professional use. The 0.8mm thick foam tape has a strong adhesive to firmly bond mould...

Indasa double sided moulding tape is a high quality tape for professional use. The 0.8mm thick foam tape has a strong adhesive to firmly bond mould...

Indasa double sided moulding tape is a high quality tape for professional use. The 0.8mm thick foam tape has a strong adhesive to firmly bond mould...

These parts fit into holes in the metal bodywork and are used to receive lugs or screws for aligning and mounting trim panels. The clips have an in...

These black plastic clips have a metal spring insert that grips the lugs of a trim panel when inserted. The clips are normally used for interior tr...

These plastic clips are normally used on the rear of the wheel arch linings. The clip pushes into a square hole and clicks into position. It can th...

These small plastic inserts are used attach small trim pieces and vehicle badges. They are used on a wide range of BMW cars for the front and rear ...

These black inserts are mounted into the metal bodywork. They are used to securely hold a secondary clip in position.

These are used for secure bodywork, trim panels and shields. The clip is used with a bodywork screw to hold parts in position. They are typically u...

These little round push button clips are used to secure rubber weather strips and seals in position. They are normally used by Honda on the seals t...

These large headed button clips are normally used on insulation or upholstery panels. The clip fits into a 7mm diameter circular hole in the bodywo...

These black clips fit into a square hole in the trims and bodywork. VW used them on some older models to attach side skirts, underbody shields and ...

These 6mm scrivets or screw fit plastic rivets have a Torx head and are used by VW on a number of different vehicles. The plastic clip is fitted to...

This a very common screw used across the VW group. They are normally used on interior trim around the dashboard, centre console, boot and doors. Th...

These fit into a square hole and are used on several VW group cars. They were used on interior or exterior trim including tailgate linings, sill co...

This part has the Ford Finis part number 6181023 and is used on some older Fords such as early model Fiesta, Escort and Focus cars. The clip fits i...

These clips are used for retaining boot carpet or interior trim panels. An example use is as Honda FRV boot carpet trim clips. The clips have a mot...

These are used on lots of older VW cars from the 1980s and 1990s. They are a simple plastic interior trim and door card clip.

These clips are used by Audi and Seat. These were fitted as Seat Exeo door card clips. Each fastener has a rubber seal attached.

A distinctive fastener used for position and securing the plastic sill covers on some door entrances and boot entrances. They are used by Volkswage...

These distinctive little black trim clips are normally used by VW on the interior panel in the footwells of the car. The clip pushes in and expands...

These clips are used on some SEAT models to secure the interior trim panel that covers the wing mirror mounting point.

These small black plastic clips are used to attach the trim on the interior door panel by the wing mirror. The trim normally covers the mounting or...

These locator clips are used to position parts such as badges, speaker covers and smaller interior trim panels.

This type of clip is often used on interior pillar covers. The clip fits onto a lug on the trim panel and then pushes into a hole in the metal body...

These parts are a suitable alternative for the VW part number 3D0867333. This 32mm long barbed stud is used to secure some interior pillar covers a...

These black fasteners are used to secure the interior pillar covers to some Ford models such as the Mk1 and Mk2 Mondeo. The clip is distinctive and...

These clips are used on pillar trims across a lot of the VW, Audi, Seat, Skoda and Porsche ranges. There is an identical clip available in white al...

These push fit retainer clips are used on many modern BMW cars to attach interior trim panels and door cards. The clips push in to expand and lock ...

This two part clip is used on items such as sill plate mouldings and interior pillar covers. They come apart when the trim is removed but both part...

This is a standard fir tree clips that fits into a 6mm hole. It is used by Opel / Vauxhall on several models to secure interior trim and upholstery...

These clips are used on pillar trims across a lot of the VW, Audi, Seat, Skoda and Porsche ranges. There is an identical clip available in white al...

Interior Trim Cover & Panel Clip in black metal for Porsche interiors. This clip secures interior trim covers and panels and is specifically us...