Products

This parts are common on several models of the Yaris to secure the undertray and bumper. They are also used on some Lexus models and are interchang...

Used on a large number of Honda and Acura vehicles for attaching bumpers, side skirts, engine undertrays and splash shields. The clips fit into a 1...

These 10mm push fit plastic rivets are used on several Honda models normally to attach radiator grilles and bumpers.

These are one of the best selling Honda equivalent clips. They are widely used across the Honda range as bumper clips, splashguard clips, side skir...

These are strong, screw fit plastic clips used to fasten bumpers and other large trim panels in place on some Honda cars.

These are short length push fit plastic rivets used on several Honda cars. The clips are normally used for securing thin panels such as arch lining...

These wide collared parts are used by Honda to secure the underbody trim covers, shields and insulation onto many of their modern vehicles. The cli...

These plastic trim clips are used by Mazda, normally on exterior parts such as bumpers, grilles or radiator shields and guide.

A good generic 10mm push fit plastic clip. The centre pin is pushed in to expand the clip and lock in place. These are suitable for a wide range of...

These are extremely common on most modern Honda cars. It's a standard 10mm push fit plastic rivet that is used to fasten larger trim panels and shi...

A simple push-to-fit expanding plastic rivet that lock in position in a 10mm hole. These fasteners are used by Subaru for bumpers, wheel arch linin...

These 10mm push pull plastic rivets are used to secure various plastic panels and trims on the Tesla Model S and Model 3. The clip fits into a 10mm...

This expanding plastic rivet is used on the Toyota GT-86 to attach parts such as the bumpers, under trays, wheel arches and some interior trim pane...

Widely used plastic trim clip for parts such as windscreen cowls, tailgate linings, sill covers, bumpers & dashboard.

These 10mm push fit rivets are used on many different Nissan cars. Typical use is on bumpers, mudguards, side skirts or wheel arch linings.

These plastic rivets are used to secure front and rear bumpers, radiator surrounds and engine bay trims. They fit into a 10mm hole.

These chunky plastic trim clips are used by Toyota on models such as the Mk3 RAV4 to attach the front grille. The clip expands when the centre in i...

These are strong screw fit plastic clips that would normally be used on bumpers or side skirts. The part number used by General Motors is 94530624 ...

These screw fit black plastic rivets are used on some Jaguar models. Typical fitments include for bumpers, arch linings or interior trim panels.

These plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the correct size hole ...

These plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the correct size hole ...

These plastic fir tree clips are perfect for holding panels or trims in place. They are a high quality part and when used in the correct size hole ...

These plastic fir tree clips are perfect for holding panels or trims in place. The large diameter head is perfect for holding loose fitting panels ...

These are widely used by General Motors and fitted to just one Vauxhall car that we know of. They are widely used on the Vauxhall Antara for bumper...

These are the clips used on most BMW cars to secure the under bonnet insulation. The clip is a simple button fastener that pushes in and clicks in ...

These button clips are used to retain the sound deadening material that it fitted to the underside of the bonnet. They are used on most modern Mini...

Screw fit plastic fasteners that are fitted to several Land Rover vehicles including the Freelander and Range Rover Sport. They are typically used ...

These are a large screw fit plastic clip that is widely used on older Honda cars. They are used on bumpers, side skirts, sill mouldings, undertrays...

This distinctive fastener is used on many different Renault cars and vans. The clip is normally used around the engine bay or the inner wing to ret...

Common Honda bonnet insulation fastener used across many of their range of cars.

These are used on several Honda models to attach bumpers, side skirts, radiator grilles and underbody shields. The clips are a simple 10mm push fit...

These rectangular collared retaining clips are normally used for the foam bumper impact absorption panels fitted behind the bumper covers.

These clips with large rectangular collars are normally used to fasten the foam impact absorption panels in place behind the plastic bumper covers.

These unusual clips have an octagonal collar. They fit into a 10mm and are suitable for larger panels such as bumpers, side skirts, sill mouldings ...

These push fit plastic rivets are used on models such as the Jaguar XF to secure the windscreen cowl at the bottom of the windshield.

These were used by BMW on several older models. They are a strong clip and so were typically used for larger trim panels such as bumpers, sill moul...

These clips have a metal spring loaded into the mechanism which helps to hold the clip firmly in place when they are fitted. The clips are very str...

One of many clips used for attaching the side mouldings and trims on various models of the Toyota Land Cruiser. There are a lot of different clips ...

These are fitted to a few different Subaru models and used to fasten bumpers, radiator grilles, side skirts and underbody shields. The clip is a si...

Used on several Mini car models, these plastic screw to fit clips are used on large trim panels such as bumpers, sill covers and underbody shields....