Passer au contenu

Passe-fil à vis / Lokut, Renault 7703081184

UGS : FCP-0860-RE1

• Pièce équivalente OE de haute qualité

• La couleur varie - blanc, beige ou jaune

• Packs en vrac disponibles

Prix d'origine €0
Prix d'origine €5,95 - Prix d'origine €14,95
Prix d'origine
Prix actuel €5,95
€5,95 - €14,95
Prix actuel €5,95
Titre: Paquet de 10

Ces clips sont utilisés pour monter les garnitures, les pare-chocs, l'éclairage et d'autres pièces en position. Le passe-fil s'insère dans un trou carré de la carrosserie. Une vis traverse la pièce à monter et dans ce passe-fil.


Ceux-ci viennent en différentes couleurs de Renault. Ils sont normalement blancs ou beiges.

Référence Renault : 7703081184

Taille du trou : 8 x 8 mm

Couleur : Blanc

Lampe avant et arrière, carte de porte avant, carte de porte arrière, pare-chocs arrière et fixation de garniture, jupe latérale, garniture de protection de moulure de seuil, garniture et garde-boue de passage de roue avant, garniture et garde-boue de passage de roue arrière

Tu pourrais aussi aimer

Screw Grommet for Trim Panels, Headlights and Tail Lamps, Renault 7703081225

Prix d'origine €8,95 - Prix d'origine €45,95
Prix d'origine
€8,95 - €45,95
€8,95 - €45,95
Prix actuel €8,95

These screw grommets have a rubber collar moulded onto the clip to provide a weather tighht seal. These grommets fit into a 8.5mm square hole. They...

Afficher tous les détails
Prix d'origine €8,95 - Prix d'origine €45,95
Prix d'origine
€8,95 - €45,95
€8,95 - €45,95
Prix actuel €8,95

Localisateur de montage et œillet à vis, Renault 7703081232

Prix d'origine €5,95 - Prix d'origine €18,95
Prix d'origine
€5,95 - €18,95
€5,95 - €18,95
Prix actuel €5,95

Ces supports à œillets à vis ont un joint en caoutchouc intégré. Ils sont utilisés pour localiser et monter des panneaux tels que des garnitures de...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €18,95
Prix d'origine
€5,95 - €18,95
€5,95 - €18,95
Prix actuel €5,95

Clips de garniture intérieure et extérieure, Renault 8200700969

Prix d'origine €5,95 - Prix d'origine €18,95
Prix d'origine
€5,95 - €18,95
€5,95 - €18,95
Prix actuel €5,95

Ces clips de garniture orange peuvent être trouvés sur de nombreuses voitures Renault modernes. Ils sont utilisés comme clips de panneau intérieur ...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €18,95
Prix d'origine
€5,95 - €18,95
€5,95 - €18,95
Prix actuel €5,95

Rivet en plastique à dégagement facile, Renault 7703072361

Prix d'origine €5,95 - Prix d'origine €13,95
Prix d'origine
€5,95 - €13,95
€5,95 - €13,95
Prix actuel €5,95

S'insérant dans un trou de 6,5 mm, ces clips sont poussés en place puis facilement libérés avec un quart de tour de la tête. Ils sont largement uti...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €13,95
Prix d'origine
€5,95 - €13,95
€5,95 - €13,95
Prix actuel €5,95

Clips de garniture en plastique Renault - Pare-chocs, boucliers de moteur, plateaux, garnitures et garnitures 7703072360

Prix d'origine €5,95 - Prix d'origine €15,95
Prix d'origine
€5,95 - €15,95
€5,95 - €15,95
Prix actuel €5,95

Ceux-ci sont largement utilisés dans une gamme de voitures et de camionnettes Renault. Les attaches en plastique sont normalement utilisées pour fi...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €15,95
Prix d'origine
€5,95 - €15,95
€5,95 - €15,95
Prix actuel €5,95
vehicleclips.co.uk
4.9
732 reviews on
Cliff_image
1 year ago
Verified
Very good the item arrived quicker than I expected. I only bought a pair of seatbelt stoppers, fitted one and it looks very OEM. Fitting instructions if you are not sure how to fit these, but please read anyway. (EXTREAMLY IMPORTANT) DO NOT cut a hole in your seatbelt it WILL weaken it and make it more likely to fail when you need it most. Rather, poke a SMALL hole through the centre of the seatbelt at the required height using something with a sharp point, like a thick needle to spread the fibers apart WITHOUT cutting them, only enough to make a SMALL hole, make sure the seatbelt buckle is above the hole (Hint: press the stud through so that the flat side of the seatbelt stopper faces toward the inside of the car and the nipple faces the outside) and then push the stud with the nipple on it through the webbing making sure the fibres of the seatbelt go around the nipple. This can be quite difficult but only make the hole just big enough to allow the nipple to squeeze through, I cannot stress this enough, DO NOT be tempted to cut the fibres to make the hole bigger. Take the backing plate (the one with the hole in it) and place it over the nipple and press hard, this takes considerable force, DO NOT use pliers', if necessary use two small pieces of wood or something similar that isn't going to damage the seatbelt or the stopper to allow you to press it closed, you will feel and hear? it click closed, job done, sit back and admire your handiwork it should look very OEM. REMEMBER THE SEATBELT IS THERE TO SAVE YOUR LIFE SO DO NOT DAMAGE IT.
Show more
A reviewer_image
1 year ago
Verified
VehicleClips is a first class company with exemplary service and products. I have purchased a number of fittings for a Range Rover L322 and new VW Beetle. The website is very intuitive to use especially if you have an idea of the parts outline dimensions or a manufacturer part number. The items always arrive very quickly (almost before you've thought to order the part!) and for the high quality are very inexpensive. When I need replacement fixings VehicleClips is always the first company I go to.
Show more
A reviewer_image
2 years ago
Verified
VehicleClip's provide a fantastic service and excellent products. The website is easy to use and has very useful dimensional specifications which I used to compare and select the fixings required. This review is for the first purchase, followed by a second for another fastener and in both cases the products were perfect. The items were very competitively priced and postage was free, packages arriving within 24-48hrs of ordering, brilliant!
Show more
A reviewer_image
2 years ago
Verified
I placed my order with VehicleClips, despite receiving slightly cheaper offers from elsewhere, because the company provided fully dimensioned sketches of each of its products that enabled me to place my order confident in the knowledge that I had chosen the correct clips. An emailed confirmation order was received within seconds with a follow-up confirmation of dispatch, (complete with a tracking reference), issued on the first working day following my order. The clips were despatched using Royal Mail's standard service and arrived two days later. They were easy to install and fitted perfectly. Thank you, VehicleClips. I couldn't have wished for better service.
Show more
A reviewer_image
2 years ago
Verified
I needed to replace some clips in my elderly Ford C Max, which had disintegrated whilst removing an internal panel. From my vague description, Richard searched , not only Ford parts, but other manufacturers, to identify those I needed. Without doubt this company, and its employees represent the very best of British businesses, for service, communication, and speedy delivery. Absolutely amazing in this day and age
Show more
A reviewer_image
2 years ago
Verified
Excellent service. Very reasonable price and the clips were dispatched delivered very quickly.. I’ll be using VehicleClips again. My only extremely minor criticism is I needed these clips for a Subaru but couldn’t find them listed. I did a search using the dimensions of the broken clips I had and found them that way but they were listed as being for a Mitsubishi. This is nit picking though. Overall couldn’t fault the price and service.
Show more