Passer au contenu

Clips de rivet en plastique de 7 mm pour couvercles et boucliers de compartiment moteur Toyota - 9046707201

UGS : FCP-0160-TO1

• Disponible en vrac

• Clip Toyota le plus vendu

• Alternative de haute qualité aux pièces d'origine Toyota

Prix d'origine €0
Prix d'origine €5,95 - Prix d'origine €15,95
Prix d'origine
Prix actuel €5,95
€5,95 - €15,95
Prix actuel €5,95
Titre: Paquet de 10
Il s'agit de l'un de nos clips Toyota les plus vendus. Ils sont utilisés sur de nombreux modèles Toyota et Lexus différents. Souvent utilisés pour les protections de compartiment moteur, les clips de garniture sont également montés comme fixations de pare-chocs, garnitures de garniture de passage de roue et clips de moulure de seuil.

Numéro de pièce Toyota : 9046707201

Taille du trou : 7 mm

Couleur : Noir

Doublure et garde-boue de passage de roue avant, panneau d'auvent ou d'auvent de pare-brise, protections de soubassement et fixation de panneau d'isolation, doublure et garde-boue de passage de roue arrière

Tu pourrais aussi aimer

Clip de garniture de rivet en plastique Toyota Push Fit - Doublure de passage de roue et pare-éclaboussures - 90467-10183

Prix d'origine €5,95 - Prix d'origine €14,95
Prix d'origine
€5,95 - €14,95
€5,95 - €14,95
Prix actuel €5,95

Le plus souvent utilisés par Toyota sur les garnitures et les boucliers de passage de roue, ces clips ne sont qu'un simple rivet en plastique qui p...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €14,95
Prix d'origine
€5,95 - €14,95
€5,95 - €14,95
Prix actuel €5,95

Clip de garniture en plastique de 7 mm, Toyota 90467-07214

Prix d'origine €5,95 - Prix d'origine €14,95
Prix d'origine
€5,95 - €14,95
€5,95 - €14,95
Prix actuel €5,95

Il existe plusieurs clips Toyota qui ressemblent tous à ceux-ci. Il est important de vérifier les mesures et le numéro de pièce avant de commander...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €14,95
Prix d'origine
€5,95 - €14,95
€5,95 - €14,95
Prix actuel €5,95

Écrou poussoir/passe-fil pour garniture de passage de roue, Toyota 90189-06013

Prix d'origine €5,95 - Prix d'origine €14,95
Prix d'origine
€5,95 - €14,95
€5,95 - €14,95
Prix actuel €5,95

Ce clip s'insère dans un trou carré de 8 mm et est normalement utilisé pour maintenir des panneaux flexibles tels que des garnitures de passage de ...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €14,95
Prix d'origine
€5,95 - €14,95
€5,95 - €14,95
Prix actuel €5,95

Rivet en plastique de 7 mm, Toyota 9046707164

Prix d'origine €5,95 - Prix d'origine €14,95
Prix d'origine
€5,95 - €14,95
€5,95 - €14,95
Prix actuel €5,95

Ces clips s'insèrent dans un trou de 7 mm. Ils poussent simplement dans le trou et s'étendent pour se verrouiller en position lorsque la goupille c...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €14,95
Prix d'origine
€5,95 - €14,95
€5,95 - €14,95
Prix actuel €5,95

Clips de panneau de pare-chocs et de garniture en plastique de 9 mm - Toyota 52161-16010, 52161-02030

Prix d'origine €5,95 - Prix d'origine €15,95
Prix d'origine
€5,95 - €15,95
€5,95 - €15,95
Prix actuel €5,95

Ce type de clip est normalement utilisé sur les panneaux extérieurs plus grands tels que les pare-chocs, les jupes latérales et les grilles de radi...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €15,95
Prix d'origine
€5,95 - €15,95
€5,95 - €15,95
Prix actuel €5,95
vehicleclips.co.uk
4.9
699 reviews on
Cliff_image
1 year ago
Verified
Very good the item arrived quicker than I expected. I only bought a pair of seatbelt stoppers, fitted one and it looks very OEM. Fitting instructions if you are not sure how to fit these, but please read anyway. (EXTREAMLY IMPORTANT) DO NOT cut a hole in your seatbelt it WILL weaken it and make it more likely to fail when you need it most. Rather, poke a SMALL hole through the centre of the seatbelt at the required height using something with a sharp point, like a thick needle to spread the fibers apart WITHOUT cutting them, only enough to make a SMALL hole, make sure the seatbelt buckle is above the hole (Hint: press the stud through so that the flat side of the seatbelt stopper faces toward the inside of the car and the nipple faces the outside) and then push the stud with the nipple on it through the webbing making sure the fibres of the seatbelt go around the nipple. This can be quite difficult but only make the hole just big enough to allow the nipple to squeeze through, I cannot stress this enough, DO NOT be tempted to cut the fibres to make the hole bigger. Take the backing plate (the one with the hole in it) and place it over the nipple and press hard, this takes considerable force, DO NOT use pliers', if necessary use two small pieces of wood or something similar that isn't going to damage the seatbelt or the stopper to allow you to press it closed, you will feel and hear? it click closed, job done, sit back and admire your handiwork it should look very OEM. REMEMBER THE SEATBELT IS THERE TO SAVE YOUR LIFE SO DO NOT DAMAGE IT.
Show more
A reviewer_image
1 year ago
Verified
VehicleClips is a first class company with exemplary service and products. I have purchased a number of fittings for a Range Rover L322 and new VW Beetle. The website is very intuitive to use especially if you have an idea of the parts outline dimensions or a manufacturer part number. The items always arrive very quickly (almost before you've thought to order the part!) and for the high quality are very inexpensive. When I need replacement fixings VehicleClips is always the first company I go to.
Show more
A reviewer_image
2 years ago
Verified
VehicleClip's provide a fantastic service and excellent products. The website is easy to use and has very useful dimensional specifications which I used to compare and select the fixings required. This review is for the first purchase, followed by a second for another fastener and in both cases the products were perfect. The items were very competitively priced and postage was free, packages arriving within 24-48hrs of ordering, brilliant!
Show more
A reviewer_image
2 years ago
Verified
I placed my order with VehicleClips, despite receiving slightly cheaper offers from elsewhere, because the company provided fully dimensioned sketches of each of its products that enabled me to place my order confident in the knowledge that I had chosen the correct clips. An emailed confirmation order was received within seconds with a follow-up confirmation of dispatch, (complete with a tracking reference), issued on the first working day following my order. The clips were despatched using Royal Mail's standard service and arrived two days later. They were easy to install and fitted perfectly. Thank you, VehicleClips. I couldn't have wished for better service.
Show more
A reviewer_image
2 years ago
Verified
I needed to replace some clips in my elderly Ford C Max, which had disintegrated whilst removing an internal panel. From my vague description, Richard searched , not only Ford parts, but other manufacturers, to identify those I needed. Without doubt this company, and its employees represent the very best of British businesses, for service, communication, and speedy delivery. Absolutely amazing in this day and age
Show more
A reviewer_image
2 years ago
Verified
Excellent service. Very reasonable price and the clips were dispatched delivered very quickly.. I’ll be using VehicleClips again. My only extremely minor criticism is I needed these clips for a Subaru but couldn’t find them listed. I did a search using the dimensions of the broken clips I had and found them that way but they were listed as being for a Mitsubishi. This is nit picking though. Overall couldn’t fault the price and service.
Show more