vvo

This fir-tree fastener secures parts such as interior and exterior panels, wheel arch liners and splash guards to the vehicle where a 10mm hole is ...

These plastic trim clips are used by Mazda, normally on exterior parts such as bumpers, grilles or radiator shields and guide.

Widely used plastic trim clip for parts such as windscreen cowls, tailgate linings, sill covers, bumpers & dashboard.

These chunky plastic trim clips are used by Toyota on models such as the Mk3 RAV4 to attach the front grille. The clip expands when the centre in i...

These screw fit black plastic rivets are used on some Jaguar models. Typical fitments include for bumpers, arch linings or interior trim panels.

These cable ties are increasingly used on vehicles and for vehicle conversions. The edge clips are ideal on panels where mounting holes are unavail...

These chunky, push fit plastic rivets fit into a 15mm hole. They are used by Suzuki to hold sill covers or side skirts into position on vehicles su...

Ces petits clips en plastique sont utilisés par VW pour fixer certaines pièces telles que les garnitures de pare-chocs, les moulures latérales et d...

These cable ties are used to secure wiring looms and washer hose on vehicles across the Volkswagen group range. The clip fits onto the edge of a b...

These small black plastic trim clips are used on some Mitsubishi models to attach the plastic cowling that runs along the bottom of the windscreen.

These small fasteners are used for attaching small trim panels in position. Typical uses are for bumper corners, grilles, fascia covers and interio...

This is one of the most common sizes of screw used by Audi for the wheel arch linings on their vehicles.

These blind rivets are used by Ford on some vehicles to secure bumpers and other body parts. It is a standard rivet but comes with a plastic end ca...

Used on side skirts, sill covers and some interior panels, this clip fits into a 6.5mm hole.

These simple push pin rivets are common on modern Porsche cars. There are typically used for wheel arch linings, sideskirts, bumpers and interior t...

These fasteners fit into a 6mm hole. When the centre pin is pushed or screwed in, the clip expands and holds securely in position. This type of cli...

These 7mm clips are normally used on the wheel arch linings or splashguards.

These push fit plastic rivets are used to clip on insulation, trim panels and shields. The clips are used on several modern Mercedes models but the...

A simple push-fit plastic rivet which expands and locks in position when the centre pin is inserted. These fasteners are used across the Lexus rang...

This is a common push fit clip used on many modern Suzuki cars. The clip is often used on the wheel arch linings and splash guards under the vehicl...

Black plastic trim clip, designed for push-fit installation. This fastener is used in a range of Lexus trim applications, including front wheel arc...

These square push fit plastic rivets are very common on modern Mini cars. The clips are used for wheel arch flares, wheel arch linings, bumpers, bo...

These plastic rivets are common on many different Ford vehicles from the Ranger to the Fusion. They are used in different places on different vehic...

This 8mm plastic fir tree clip is used on models such as the Mito. The clip is used to secure parts such as the tailgate lining.

These solid, 8mm plastic fir tree clips are used on models such as the Renault Kadjar to attach the engine undertray panel. The clips are black and...

These bodywork screws are used to attach body parts as well and underbody shields, covers and linings.

This is a common interior trim panel fastener on modern Fiat cars. The clip is used to secure panels such as tailgate linings and other trims withi...

A simple to use, push fit fir tree clip used by Ford on parts such as tailgate linings. These clips hold tight in an 8mm diameter hole. They are us...

8mm push-fit black plastic rivet designed for some Mercedes bumper, grille and trim fittings. This fastener secures front bumper components, front ...

These simple 8mm plastic rivets expand when push in. The clip is used for securing items such as wheel arch linings, undertrays, bumpers and grilles.

These 8mm push fit plastic rivets are used on some models such as the Nissan Leaf and Note. The clip fits into an 8mm hole and expands to secure in...

Fitted to the Model 3, these clips are used to attach some of the underbody shields to the vehicle. The clip pushes into an 8mm hole and expands to...

This clip fits into an 8mm hole and is used to secure parts such as undertrays, bumpers and wheel arch linings.

These 9mm push fit plastic rivets are used for securing trim such as the windscreen cowl in position.

These distinctive trim clips are used on bumpers, shields and undertrays. They fit into a 9mm hole and have a wide 33mm collar.