Passer au contenu

Rondelle de blocage en étoile pour protections de soubassement et isolation - Volkswagen N90796502

UGS : FWM-0001-VW1

• Haute qualité équivalente à la pièce d'origine

• Même résistance à la corrosion que les rondelles d'origine

Prix d'origine €0
Prix d'origine €6,95 - Prix d'origine €15,95
Prix d'origine
Prix actuel €6,95
€6,95 - €15,95
Prix actuel €6,95
Titre: Paquet de 10
Ces rondelles en étoile de verrouillage conviennent à la fixation de l'isolation phonique et thermique du soubassement. Les pièces résistantes à la corrosion sont utilisées dans toute la gamme Volkswagen mais sachez qu'il existe différentes tailles disponibles. Nous offrons d'excellentes remises d'achat en gros sur ces pièces.

VolkswagenVolkswagen Référence : N90796502N90796501

Couleur : Argent

Protection inférieure du moteur, protections de soubassement et fixation du panneau d'isolation, protection thermique du moteur ou fixation de l'isolateur

Tu pourrais aussi aimer

Underbody Insulation & Heat Shield Retainer Washer, Volkswagen WHT003386, WHT 003 386

Prix d'origine €5,95 - Prix d'origine €16,95
Prix d'origine
€5,95 - €16,95
€5,95 - €16,95
Prix actuel €5,95

These plastic spacers / washers are used with metal clamps to secure underbody shields into position. They are very common across the VW group.

Prix d'origine €5,95 - Prix d'origine €16,95
Prix d'origine
€5,95 - €16,95
€5,95 - €16,95
Prix actuel €5,95

Rondelle de blocage en étoile pour protections de soubassement et isolation - Volkswagen N90335004

Prix d'origine €5,95 - Prix d'origine €15,95
Prix d'origine
€5,95 - €15,95
€5,95 - €15,95
Prix actuel €5,95

Ces rondelles en étoile de verrouillage conviennent à la fixation de l'isolation phonique et thermique du soubassement. Les pièces résistantes à la...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €15,95
Prix d'origine
€5,95 - €15,95
€5,95 - €15,95
Prix actuel €5,95

Écrous en plastique pour panneaux de garniture, rembourrage et supports de capteur - Mercedes A0039900251

Prix d'origine €5,95 - Prix d'origine €16,95
Prix d'origine
€5,95 - €16,95
€5,95 - €16,95
Prix actuel €5,95

Ces fixations sont un écrou non fileté utilisé à diverses fins dans la gamme Mercedes-Benz. Ils ne sont pas filetés à l'intérieur et se serrent don...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €16,95
Prix d'origine
€5,95 - €16,95
€5,95 - €16,95
Prix actuel €5,95

Écrou en plastique fileté à col large, Volkswagen WHT000713

Prix d'origine €5,95 - Prix d'origine €17,95
Prix d'origine
€5,95 - €17,95
€5,95 - €17,95
Prix actuel €5,95

Ceux-ci sont très courants sur les voitures et camionnettes VW modernes. Les écrous sont presque toujours utilisés pour fixer les boucliers de soub...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €17,95
Prix d'origine
€5,95 - €17,95
€5,95 - €17,95
Prix actuel €5,95

Oeillets à vis en plastique / contre-écrous - Volkswagen 867809966

Prix d'origine €5,95 - Prix d'origine €14,95
Prix d'origine
€5,95 - €14,95
€5,95 - €14,95
Prix actuel €5,95

Utilisés sur plusieurs voitures et camionnettes VW, il s'agit également d'un bon œillet à vis universel pour le montage et l'assemblage de pièces e...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €14,95
Prix d'origine
€5,95 - €14,95
€5,95 - €14,95
Prix actuel €5,95
vehicleclips.co.uk
4.9
782 reviews on
Cliff_image
1 year ago
Verified
Very good the item arrived quicker than I expected. I only bought a pair of seatbelt stoppers, fitted one and it looks very OEM. Fitting instructions if you are not sure how to fit these, but please read anyway. (EXTREAMLY IMPORTANT) DO NOT cut a hole in your seatbelt it WILL weaken it and make it more likely to fail when you need it most. Rather, poke a SMALL hole through the centre of the seatbelt at the required height using something with a sharp point, like a thick needle to spread the fibers apart WITHOUT cutting them, only enough to make a SMALL hole, make sure the seatbelt buckle is above the hole (Hint: press the stud through so that the flat side of the seatbelt stopper faces toward the inside of the car and the nipple faces the outside) and then push the stud with the nipple on it through the webbing making sure the fibres of the seatbelt go around the nipple. This can be quite difficult but only make the hole just big enough to allow the nipple to squeeze through, I cannot stress this enough, DO NOT be tempted to cut the fibres to make the hole bigger. Take the backing plate (the one with the hole in it) and place it over the nipple and press hard, this takes considerable force, DO NOT use pliers', if necessary use two small pieces of wood or something similar that isn't going to damage the seatbelt or the stopper to allow you to press it closed, you will feel and hear? it click closed, job done, sit back and admire your handiwork it should look very OEM. REMEMBER THE SEATBELT IS THERE TO SAVE YOUR LIFE SO DO NOT DAMAGE IT.
Show more
A reviewer_image
1 year ago
Verified
VehicleClips is a first class company with exemplary service and products. I have purchased a number of fittings for a Range Rover L322 and new VW Beetle. The website is very intuitive to use especially if you have an idea of the parts outline dimensions or a manufacturer part number. The items always arrive very quickly (almost before you've thought to order the part!) and for the high quality are very inexpensive. When I need replacement fixings VehicleClips is always the first company I go to.
Show more
A reviewer_image
2 years ago
Verified
VehicleClip's provide a fantastic service and excellent products. The website is easy to use and has very useful dimensional specifications which I used to compare and select the fixings required. This review is for the first purchase, followed by a second for another fastener and in both cases the products were perfect. The items were very competitively priced and postage was free, packages arriving within 24-48hrs of ordering, brilliant!
Show more
A reviewer_image
2 years ago
Verified
I placed my order with VehicleClips, despite receiving slightly cheaper offers from elsewhere, because the company provided fully dimensioned sketches of each of its products that enabled me to place my order confident in the knowledge that I had chosen the correct clips. An emailed confirmation order was received within seconds with a follow-up confirmation of dispatch, (complete with a tracking reference), issued on the first working day following my order. The clips were despatched using Royal Mail's standard service and arrived two days later. They were easy to install and fitted perfectly. Thank you, VehicleClips. I couldn't have wished for better service.
Show more
A reviewer_image
2 years ago
Verified
I needed to replace some clips in my elderly Ford C Max, which had disintegrated whilst removing an internal panel. From my vague description, Richard searched , not only Ford parts, but other manufacturers, to identify those I needed. Without doubt this company, and its employees represent the very best of British businesses, for service, communication, and speedy delivery. Absolutely amazing in this day and age
Show more
A reviewer_image
2 years ago
Verified
Excellent service. Very reasonable price and the clips were dispatched delivered very quickly.. I’ll be using VehicleClips again. My only extremely minor criticism is I needed these clips for a Subaru but couldn’t find them listed. I did a search using the dimensions of the broken clips I had and found them that way but they were listed as being for a Mitsubishi. This is nit picking though. Overall couldn’t fault the price and service.
Show more