Passer au contenu

Clips de pare-éclaboussures, de passage de roue et de capot de pare-brise - Honda 91501-TR0-003

UGS : FCP-0212-HO1

Prix d'origine £0
Prix d'origine £4.69 - Prix d'origine £13.29
Prix d'origine
Prix actuel £4.69
£4.69 - £13.29
Prix actuel £4.69
Titre: Paquet de 10
Utilisés sur un certain nombre de voitures Honda différentes, ces clips sont souvent montés sur les garnitures de passage de roue, les boucliers de moteur, les panneaux de soubassement, les grilles de radiateur et les capots de pare-brise.

Numéro de pièce Honda : 91501TR0003

Taille du trou : 8 mm

Couleur : Noir

Doublure et garde-boue de passage de roue avant, Pare-chocs arrière et fixation de garniture, Doublure et garde-boue de passage de roue arrière, Bouclier de compartiment moteur, Panneau d'auvent ou d'auvent de pare-brise, Évasement de passage de roue avant et moulure de garniture, Fixation de garniture de console centrale, Pare-chocs avant et fixation de garniture, avant Grille ou panneau Slam

Tu pourrais aussi aimer

Rivet en plastique 10 mm, Honda 91505-TM8-003

Prix d'origine £4.89 - Prix d'origine £14.99
Prix d'origine
£4.89 - £14.99
£4.89 - £14.99
Prix actuel £4.89

Celles-ci sont extrêmement courantes sur la plupart des voitures Honda modernes. Il s'agit d'un rivet en plastique standard de 10 mm qui est utilis...

Afficher tous les détails
Prix d'origine £4.89 - Prix d'origine £14.99
Prix d'origine
£4.89 - £14.99
£4.89 - £14.99
Prix actuel £4.89

Clips en plastique de 8 mm pour calandre Honda, doublure de passage de roue et clips de pare-chocs 91512-SX0-003

Prix d'origine £4.69 - Prix d'origine £12.59
Prix d'origine
£4.69 - £12.59
£4.69 - £12.59
Prix actuel £4.69

Clip Honda extrêmement courant utilisé sur les garnitures de passage de roue et les grilles de radiateur. Le clip de 8 mm est un simple rivet à pou...

Afficher tous les détails
Prix d'origine £4.69 - Prix d'origine £12.59
Prix d'origine
£4.69 - £12.59
£4.69 - £12.59
Prix actuel £4.69

Clip de bouchon poussoir pour garnitures de passage de roue et pare-éclaboussures - Honda 90682-SEA-003

Prix d'origine £4.69 - Prix d'origine £13.39
Prix d'origine
£4.69 - £13.39
£4.69 - £13.39
Prix actuel £4.69

Bouchons poussoirs simples utilisés pour maintenir les garnitures de passage de roue ou les garde-boue en place sur plusieurs modèles Honda. Ces at...

Afficher tous les détails
Prix d'origine £4.69 - Prix d'origine £13.39
Prix d'origine
£4.69 - £13.39
£4.69 - £13.39
Prix actuel £4.69

Clips de revêtement et de pare-éclaboussures en plastique Honda 8 mm 91501-S04-003

Prix d'origine £4.69 - Prix d'origine £12.99
Prix d'origine
£4.69 - £12.99
£4.69 - £12.99
Prix actuel £4.69

Communs sur plusieurs voitures produites par Honda, ces clips à emboîtement de 8 mm sont normalement utilisés pour maintenir les garnitures de pass...

Afficher tous les détails
Prix d'origine £4.69 - Prix d'origine £12.99
Prix d'origine
£4.69 - £12.99
£4.69 - £12.99
Prix actuel £4.69

Clips de garniture de moulure de passage de roue - Honda 91513-T0A-A01

Prix d'origine £4.59 - Prix d'origine £12.29
Prix d'origine
£4.59 - £12.29
£4.59 - £12.29
Prix actuel £4.59

Ces petits clips noirs sont utilisés sur certains modèles Honda pour fixer les garnitures en plastique qui courent sur les bords du passage de roue...

Afficher tous les détails
Prix d'origine £4.59 - Prix d'origine £12.29
Prix d'origine
£4.59 - £12.29
£4.59 - £12.29
Prix actuel £4.59
vehicleclips.co.uk
4.9
734 reviews on
Cliff_image
1 year ago
Verified
Very good the item arrived quicker than I expected. I only bought a pair of seatbelt stoppers, fitted one and it looks very OEM. Fitting instructions if you are not sure how to fit these, but please read anyway. (EXTREAMLY IMPORTANT) DO NOT cut a hole in your seatbelt it WILL weaken it and make it more likely to fail when you need it most. Rather, poke a SMALL hole through the centre of the seatbelt at the required height using something with a sharp point, like a thick needle to spread the fibers apart WITHOUT cutting them, only enough to make a SMALL hole, make sure the seatbelt buckle is above the hole (Hint: press the stud through so that the flat side of the seatbelt stopper faces toward the inside of the car and the nipple faces the outside) and then push the stud with the nipple on it through the webbing making sure the fibres of the seatbelt go around the nipple. This can be quite difficult but only make the hole just big enough to allow the nipple to squeeze through, I cannot stress this enough, DO NOT be tempted to cut the fibres to make the hole bigger. Take the backing plate (the one with the hole in it) and place it over the nipple and press hard, this takes considerable force, DO NOT use pliers', if necessary use two small pieces of wood or something similar that isn't going to damage the seatbelt or the stopper to allow you to press it closed, you will feel and hear? it click closed, job done, sit back and admire your handiwork it should look very OEM. REMEMBER THE SEATBELT IS THERE TO SAVE YOUR LIFE SO DO NOT DAMAGE IT.
Show more
A reviewer_image
1 year ago
Verified
VehicleClips is a first class company with exemplary service and products. I have purchased a number of fittings for a Range Rover L322 and new VW Beetle. The website is very intuitive to use especially if you have an idea of the parts outline dimensions or a manufacturer part number. The items always arrive very quickly (almost before you've thought to order the part!) and for the high quality are very inexpensive. When I need replacement fixings VehicleClips is always the first company I go to.
Show more
A reviewer_image
2 years ago
Verified
VehicleClip's provide a fantastic service and excellent products. The website is easy to use and has very useful dimensional specifications which I used to compare and select the fixings required. This review is for the first purchase, followed by a second for another fastener and in both cases the products were perfect. The items were very competitively priced and postage was free, packages arriving within 24-48hrs of ordering, brilliant!
Show more
A reviewer_image
2 years ago
Verified
I placed my order with VehicleClips, despite receiving slightly cheaper offers from elsewhere, because the company provided fully dimensioned sketches of each of its products that enabled me to place my order confident in the knowledge that I had chosen the correct clips. An emailed confirmation order was received within seconds with a follow-up confirmation of dispatch, (complete with a tracking reference), issued on the first working day following my order. The clips were despatched using Royal Mail's standard service and arrived two days later. They were easy to install and fitted perfectly. Thank you, VehicleClips. I couldn't have wished for better service.
Show more
A reviewer_image
2 years ago
Verified
I needed to replace some clips in my elderly Ford C Max, which had disintegrated whilst removing an internal panel. From my vague description, Richard searched , not only Ford parts, but other manufacturers, to identify those I needed. Without doubt this company, and its employees represent the very best of British businesses, for service, communication, and speedy delivery. Absolutely amazing in this day and age
Show more
A reviewer_image
2 years ago
Verified
Excellent service. Very reasonable price and the clips were dispatched delivered very quickly.. I’ll be using VehicleClips again. My only extremely minor criticism is I needed these clips for a Subaru but couldn’t find them listed. I did a search using the dimensions of the broken clips I had and found them that way but they were listed as being for a Mitsubishi. This is nit picking though. Overall couldn’t fault the price and service.
Show more