Passer au contenu

Land Rover Rivets Push Fit 8 mm pour doublure de passage de roue, pare-chocs, jupes latérales et grilles ANR2224

UGS : FCP-0171-LA1

• Commun à toute la gamme Land Rover

• Rivet en plastique à emboîtement solide

• Disponible en vrac

Prix d'origine £0
Prix d'origine £4.69 - Prix d'origine £13.29
Prix d'origine
Prix actuel £4.69
£4.69 - £13.29
Prix actuel £4.69
Titre: Pack of 10
Ces clips sont utilisés dans toute la gamme Land Rover pour fixer les jupes latérales, les grilles de radiateur, les pare-chocs, les passages de roue et les passages de roue. Les clips sont un simple rivet en plastique à emboîtement. Toutes nos pièces sont fabriquées selon les mêmes spécifications que les pièces d'origine du fabricant et disponibles en vrac pour les acheteurs commerciaux.

Numéro de pièce Land Rover : ANR2224, DYQ100330, DYQ100320

Taille du trou : 9 mm

Couleur : Noir

Doublure et garde-boue de passage de roue avant, pare-chocs arrière et fixation de garniture, jupe latérale, garniture de protection de moulure de bas de caisse, doublure et garde-boue de passage de roue arrière, protections de soubassement et fixation de panneau d'isolation, fixation de pare-chocs et garniture de pare-chocs avant, protection inférieure du moteur, calandre avant ou panneau de claquement, Capot de pare-brise ou panneau d'auvent

Tu pourrais aussi aimer

Rivet à vis en plastique de 6,5 mm - Pare-chocs, grilles, arches - Land Rover RYQ500070

Prix d'origine £4.69 - Prix d'origine £12.89
Prix d'origine
£4.69 - £12.89
£4.69 - £12.89
Prix actuel £4.69

Ces clips sont utilisés sur de nombreux véhicules Land Rover différents, du MK2 Discovery aux Range Rover actuels. Ils sont généralement utilisés c...

Afficher tous les détails
Prix d'origine £4.69 - Prix d'origine £12.89
Prix d'origine
£4.69 - £12.89
£4.69 - £12.89
Prix actuel £4.69

Clips de rivet en plastique de 5 mm pour garnitures, garnitures de passage de roue et moulures - 51161881149

Prix d'origine £4.69 - Prix d'origine £13.29
Prix d'origine
£4.69 - £13.29
£4.69 - £13.29
Prix actuel £4.69

Un clip de garniture de 5 mm très largement utilisé par BMW sur les évasements de passage de roue, les garnitures, les garnitures et d'autres pièce...

Afficher tous les détails
Prix d'origine £4.69 - Prix d'origine £13.29
Prix d'origine
£4.69 - £13.29
£4.69 - £13.29
Prix actuel £4.69

Bandes de carrosserie de porte, moulures de passage de roue et clips de garniture de coffre, Land Rover DYC101420

Prix d'origine £4.79 - Prix d'origine £13.89
Prix d'origine
£4.79 - £13.89
£4.79 - £13.89
Prix actuel £4.79

Ces clips en plastique distinctifs en deux parties sont utilisés pour fixer les moulures extérieures en plastique sur un certain nombre de modèles ...

Afficher tous les détails
Prix d'origine £4.79 - Prix d'origine £13.89
Prix d'origine
£4.79 - £13.89
£4.79 - £13.89
Prix actuel £4.79

Rivet de garniture en plastique de 8 mm pour pare-chocs, arches et garnitures - Land Rover 79086L

Prix d'origine £4.69 - Prix d'origine £13.29
Prix d'origine
£4.69 - £13.29
£4.69 - £13.29
Prix actuel £4.69

Il s'agit d'un clip commun à toute la gamme Land Rover et il est utilisé à de nombreuses fins. Le rivet en plastique de 8 mm se trouve sur les pare...

Afficher tous les détails
Prix d'origine £4.69 - Prix d'origine £13.29
Prix d'origine
£4.69 - £13.29
£4.69 - £13.29
Prix actuel £4.69

Rivet à pression 7 mm, Land Rover HYQ100060PUY

Prix d'origine £6.29 - Prix d'origine £15.79
Prix d'origine
£6.29 - £15.79
£6.29 - £15.79
Prix actuel £6.29

Ces clips de garniture extensibles en plastique noir s'insèrent dans un trou de 7 mm et le clip se verrouille en position lorsque la tête est enfon...

Afficher tous les détails
Prix d'origine £6.29 - Prix d'origine £15.79
Prix d'origine
£6.29 - £15.79
£6.29 - £15.79
Prix actuel £6.29
vehicleclips.co.uk
4.9
699 reviews on
Cliff_image
1 year ago
Verified
Very good the item arrived quicker than I expected. I only bought a pair of seatbelt stoppers, fitted one and it looks very OEM. Fitting instructions if you are not sure how to fit these, but please read anyway. (EXTREAMLY IMPORTANT) DO NOT cut a hole in your seatbelt it WILL weaken it and make it more likely to fail when you need it most. Rather, poke a SMALL hole through the centre of the seatbelt at the required height using something with a sharp point, like a thick needle to spread the fibers apart WITHOUT cutting them, only enough to make a SMALL hole, make sure the seatbelt buckle is above the hole (Hint: press the stud through so that the flat side of the seatbelt stopper faces toward the inside of the car and the nipple faces the outside) and then push the stud with the nipple on it through the webbing making sure the fibres of the seatbelt go around the nipple. This can be quite difficult but only make the hole just big enough to allow the nipple to squeeze through, I cannot stress this enough, DO NOT be tempted to cut the fibres to make the hole bigger. Take the backing plate (the one with the hole in it) and place it over the nipple and press hard, this takes considerable force, DO NOT use pliers', if necessary use two small pieces of wood or something similar that isn't going to damage the seatbelt or the stopper to allow you to press it closed, you will feel and hear? it click closed, job done, sit back and admire your handiwork it should look very OEM. REMEMBER THE SEATBELT IS THERE TO SAVE YOUR LIFE SO DO NOT DAMAGE IT.
Show more
A reviewer_image
1 year ago
Verified
VehicleClips is a first class company with exemplary service and products. I have purchased a number of fittings for a Range Rover L322 and new VW Beetle. The website is very intuitive to use especially if you have an idea of the parts outline dimensions or a manufacturer part number. The items always arrive very quickly (almost before you've thought to order the part!) and for the high quality are very inexpensive. When I need replacement fixings VehicleClips is always the first company I go to.
Show more
A reviewer_image
2 years ago
Verified
VehicleClip's provide a fantastic service and excellent products. The website is easy to use and has very useful dimensional specifications which I used to compare and select the fixings required. This review is for the first purchase, followed by a second for another fastener and in both cases the products were perfect. The items were very competitively priced and postage was free, packages arriving within 24-48hrs of ordering, brilliant!
Show more
A reviewer_image
2 years ago
Verified
I placed my order with VehicleClips, despite receiving slightly cheaper offers from elsewhere, because the company provided fully dimensioned sketches of each of its products that enabled me to place my order confident in the knowledge that I had chosen the correct clips. An emailed confirmation order was received within seconds with a follow-up confirmation of dispatch, (complete with a tracking reference), issued on the first working day following my order. The clips were despatched using Royal Mail's standard service and arrived two days later. They were easy to install and fitted perfectly. Thank you, VehicleClips. I couldn't have wished for better service.
Show more
A reviewer_image
2 years ago
Verified
I needed to replace some clips in my elderly Ford C Max, which had disintegrated whilst removing an internal panel. From my vague description, Richard searched , not only Ford parts, but other manufacturers, to identify those I needed. Without doubt this company, and its employees represent the very best of British businesses, for service, communication, and speedy delivery. Absolutely amazing in this day and age
Show more
A reviewer_image
2 years ago
Verified
Excellent service. Very reasonable price and the clips were dispatched delivered very quickly.. I’ll be using VehicleClips again. My only extremely minor criticism is I needed these clips for a Subaru but couldn’t find them listed. I did a search using the dimensions of the broken clips I had and found them that way but they were listed as being for a Mitsubishi. This is nit picking though. Overall couldn’t fault the price and service.
Show more