Passer au contenu

Pinces à riveter en plastique 8 mm, Mazda L33X13209

UGS : FCP-0440-MA1

• Équivalent OE de haute qualité

• Disponible en tailles de conditionnement en vrac

• Utilisé dans de nombreux endroits différents

Prix d'origine £0
Prix d'origine £4.69 - Prix d'origine £12.79
Prix d'origine
Prix actuel £5.95
£4.69 - £12.79
Prix actuel £4.69
Titre: Paquet de 10
Ces clips sont un remplacement de haute qualité identique aux pièces d'origine. Mazda utilise ces rivets en plastique pour une variété d'utilisations. On les trouve maintenant en place les doublures intérieures des ailes, en fixant les capots de pare-brise ou sur les garnitures et panneaux intérieurs. Ils sont utilisés sur plusieurs modèles mais ne seront pas le seul type de clips utilisé. Veuillez vérifier les mesures et le numéro de pièce avant de commander.

Numéro de pièce Mazda : L33X13209

Taille du trou : 8 mm

Couleur : Noir

Jupe Latérale, Garniture de Couverture de Moulure de Seuil, Doublure et Garde-Boue de Passage de Roue Avant, Boucliers de Soubassement et Fixation de Panneau d'Isolation, Évasement de Passage de Roue Avant et Moulure de Garniture, Fixation de Pare-chocs et Garniture Arrière, Évasement de Passage de Roue Arrière et Garniture de Moulure, Garniture de Passage de Roue Arrière et Garde-Boue , capot de pare-brise ou panneau d'auvent, carte de porte avant

Tu pourrais aussi aimer

Mazda Joint d'étanchéité et joint de porte en caoutchouc Clips/Fixations - G03158762

Prix d'origine €5,95 - Prix d'origine €13,95
Prix d'origine
€5,95 - €13,95
€5,95 - €13,95
Prix actuel €5,95

Ces petits clips en plastique sont utilisés sur les joints d'étanchéité et les joints d'ouverture en caoutchouc. La tête du clip s'adapte à l'intér...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €13,95
Prix d'origine
€5,95 - €13,95
€5,95 - €13,95
Prix actuel €5,95

Clips de garniture à rivets en plastique, Mazda BC1D56145

Prix d'origine €5,95 - Prix d'origine €15,95
Prix d'origine
€5,95 - €15,95
€5,95 - €15,95
Prix actuel €5,95

Ce clip de 8 mm est très rapide et facile à installer et à enlever. Ils sont souvent utilisés pour les panneaux où l'accès peut être nécessaire, co...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €15,95
Prix d'origine
€5,95 - €15,95
€5,95 - €15,95
Prix actuel €5,95

Fixation en plastique à vis à col ovale de 5 mm, Mazda GJ6E50715A GJ6E50715B

Prix d'origine €5,95 - Prix d'origine €15,95
Prix d'origine
€5,95 - €15,95
€5,95 - €15,95
Prix actuel €5,95

Cette fermeture à vis distinctive a un collier ovale. Le clip est normalement utilisé pour les capots de pare-brise ou les garnitures de panneau d'...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €15,95
Prix d'origine
€5,95 - €15,95
€5,95 - €15,95
Prix actuel €5,95

Rivet en plastique à vis pour Mazda - B09251833

Prix d'origine €5,95 - Prix d'origine €15,95
Prix d'origine
€5,95 - €15,95
€5,95 - €15,95
Prix actuel €5,95

Ce clip est très largement utilisé sur toute la gamme Mazda. Il est utilisé sur tout, des panneaux de garniture intérieure aux pare-chocs, en passa...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €15,95
Prix d'origine
€5,95 - €15,95
€5,95 - €15,95
Prix actuel €5,95

Rivet en plastique de 8 mm, Mazda BGV4-56-145

Prix d'origine €5,95 - Prix d'origine €16,95
Prix d'origine
€5,95 - €16,95
€5,95 - €16,95
Prix actuel €5,95

Très courant dans la gamme Mazda, ce clip est utilisé pour fixer et sécuriser une grande variété de pièces. Les utilisations incluent les clips de ...

Afficher tous les détails
Prix d'origine €5,95 - Prix d'origine €16,95
Prix d'origine
€5,95 - €16,95
€5,95 - €16,95
Prix actuel €5,95
vehicleclips.co.uk
4.9
532 reviews on
Cliff_image
1 year ago
Verified
Very good the item arrived quicker than I expected. I only bought a pair of seatbelt stoppers, fitted one and it looks very OEM. Fitting instructions if you are not sure how to fit these, but please read anyway. (EXTREAMLY IMPORTANT) DO NOT cut a hole in your seatbelt it WILL weaken it and make it more likely to fail when you need it most. Rather, poke a SMALL hole through the centre of the seatbelt at the required height using something with a sharp point, like a thick needle to spread the fibers apart WITHOUT cutting them, only enough to make a SMALL hole, make sure the seatbelt buckle is above the hole (Hint: press the stud through so that the flat side of the seatbelt stopper faces toward the inside of the car and the nipple faces the outside) and then push the stud with the nipple on it through the webbing making sure the fibres of the seatbelt go around the nipple. This can be quite difficult but only make the hole just big enough to allow the nipple to squeeze through, I cannot stress this enough, DO NOT be tempted to cut the fibres to make the hole bigger. Take the backing plate (the one with the hole in it) and place it over the nipple and press hard, this takes considerable force, DO NOT use pliers', if necessary use two small pieces of wood or something similar that isn't going to damage the seatbelt or the stopper to allow you to press it closed, you will feel and hear? it click closed, job done, sit back and admire your handiwork it should look very OEM. REMEMBER THE SEATBELT IS THERE TO SAVE YOUR LIFE SO DO NOT DAMAGE IT.
Show more
A reviewer_image
1 year ago
Verified
VehicleClips is a first class company with exemplary service and products. I have purchased a number of fittings for a Range Rover L322 and new VW Beetle. The website is very intuitive to use especially if you have an idea of the parts outline dimensions or a manufacturer part number. The items always arrive very quickly (almost before you've thought to order the part!) and for the high quality are very inexpensive. When I need replacement fixings VehicleClips is always the first company I go to.
Show more
A reviewer_image
2 years ago
Verified
VehicleClip's provide a fantastic service and excellent products. The website is easy to use and has very useful dimensional specifications which I used to compare and select the fixings required. This review is for the first purchase, followed by a second for another fastener and in both cases the products were perfect. The items were very competitively priced and postage was free, packages arriving within 24-48hrs of ordering, brilliant!
Show more
A reviewer_image
2 years ago
Verified
I placed my order with VehicleClips, despite receiving slightly cheaper offers from elsewhere, because the company provided fully dimensioned sketches of each of its products that enabled me to place my order confident in the knowledge that I had chosen the correct clips. An emailed confirmation order was received within seconds with a follow-up confirmation of dispatch, (complete with a tracking reference), issued on the first working day following my order. The clips were despatched using Royal Mail's standard service and arrived two days later. They were easy to install and fitted perfectly. Thank you, VehicleClips. I couldn't have wished for better service.
Show more
A reviewer_image
2 years ago
Verified
This product: battery cover clips for my Mustang - was exactly what I wanted. It came up on a Google search. I couldn't quite believe it would be as described but for less then £4 was worth a punt. Sure enough the clips were exactly the right thing when they arrived 2 days later. Great product, well priced and swiftly delivered. Excellent!
Show more
A reviewer_image
1 year ago
Verified
Found my self needing clips to reattach trim to van door. No Peugeot dealer locally. Found vehicle clips online: had exactly what I was looking for; effortless ordering, quick order confirmation and status updates, great price and delivered the following day. What’s not to love? Online as it should be. Great service VehicleClips.
Show more
A reviewer_image
2 years ago
Verified
Having previously ordered some clips from Amazon that where of very poor quality and wouldn’t work, I found these vehicle clips. These clips work perfectly no fuss and delivery was quick too. A company dedicated to vehicle clips seems pretty random to be fair, but I’m glad they are here 5/5.
Show more
A reviewer_image
2 years ago
Verified
I needed to replace some clips in my elderly Ford C Max, which had disintegrated whilst removing an internal panel. From my vague description, Richard searched , not only Ford parts, but other manufacturers, to identify those I needed. Without doubt this company, and its employees represent the very best of British businesses, for service, communication, and speedy delivery. Absolutely amazing in this day and age
Show more