Passer au contenu

Rivet extensible 6 mm, Ford 1382744

UGS : FCP-1086-FO1

• Pièce équivalente OE de haute qualité

• S'insère dans un trou de 6 mm

• Commun sur les voitures et camionnettes Ford modernes

Prix d'origine £0
Prix d'origine £5.39 - Prix d'origine £23.49
Prix d'origine
Prix actuel £5.39
£5.39 - £23.49
Prix actuel £5.39
Titre: Paquet de 10
Un rivet en plastique de 6 mm qui se dilate pour se verrouiller en position lorsque la tête est enfoncée. Ces clips sont utilisés sur les voitures et camionnettes Ford pour fixer les panneaux ou les garnitures dans et autour du compartiment moteur, des passages de roue, des pare-chocs et de la cabine.

Numéro de pièce Ford : 1382744

Taille du trou : 6 mm

Couleur : Noir

Panneau d'auvent ou d'auvent de pare-brise, bouclier de compartiment moteur, doublure et garde-boue de passage de roue avant, boucliers de soubassement et fixation de panneau d'isolation, calandre avant ou panneau de claquement, entourage de radiateur et panneau de guidage d'air, fixation de garniture de console centrale, pare-chocs arrière et fixation de garniture

Tu pourrais aussi aimer

Rivet en plastique à emboîtement de 6 mm, universel

Prix d'origine £4.69 - Prix d'origine £12.79
Prix d'origine
£4.69 - £12.79
£4.69 - £12.79
Prix actuel £4.69

Ce rivet en plastique standard de 6 mm de long convient à un large éventail d'utilisations. L'utilisation automobile typique serait les garnitures ...

Afficher tous les détails
Prix d'origine £4.69 - Prix d'origine £12.79
Prix d'origine
£4.69 - £12.79
£4.69 - £12.79
Prix actuel £4.69

8.5mm Push Fit Expanding Rivet, Black- Ford 5055443, 4862709

Prix d'origine £4.69 - Prix d'origine £12.89
Prix d'origine
£4.69 - £12.89
£4.69 - £12.89
Prix actuel £4.69

These plastic rivets are common on many different Ford vehicles from the Ranger to the Fusion. They are used in different places on different vehic...

Afficher tous les détails
Prix d'origine £4.69 - Prix d'origine £12.89
Prix d'origine
£4.69 - £12.89
£4.69 - £12.89
Prix actuel £4.69

Clips de garniture en plastique pour pare-chocs, garnitures et capots Vauxhall - 9130754

Prix d'origine £4.59 - Prix d'origine £12.49
Prix d'origine
£4.59 - £12.49
£4.59 - £12.49
Prix actuel £4.59

Ces petits clips de garniture en plastique à emboîtement s'insèrent dans un trou de 6 mm. Ils sont utilisés sur une large gamme de différents modèl...

Afficher tous les détails
Prix d'origine £4.59 - Prix d'origine £12.49
Prix d'origine
£4.59 - £12.49
£4.59 - £12.49
Prix actuel £4.59

Œillet à vis en plastique - Passages de roue, lignes et contours de radiateur - Ford 1060318

Prix d'origine £4.59 - Prix d'origine £12.19
Prix d'origine
£4.59 - £12.19
£4.59 - £12.19
Prix actuel £4.59

Ces petits œillets à vis en plastique blanc sont largement utilisés sur les voitures et camionnettes Ford modernes. Le clip est couramment utilisé ...

Afficher tous les détails
Prix d'origine £4.59 - Prix d'origine £12.19
Prix d'origine
£4.59 - £12.19
£4.59 - £12.19
Prix actuel £4.59

Clip de rivet en plastique de 6 mm, Volvo 1268176

Prix d'origine £4.69 - Prix d'origine £12.89
Prix d'origine
£4.69 - £12.89
£4.69 - £12.89
Prix actuel £4.69

Le clip de rivet en plastique expansible s'insère dans un trou de 6 mm de diamètre. La goupille centrale s'insère pour étendre le clip et le verrou...

Afficher tous les détails
Prix d'origine £4.69 - Prix d'origine £12.89
Prix d'origine
£4.69 - £12.89
£4.69 - £12.89
Prix actuel £4.69
vehicleclips.co.uk
4.9
701 reviews on
Cliff_image
1 year ago
Verified
Very good the item arrived quicker than I expected. I only bought a pair of seatbelt stoppers, fitted one and it looks very OEM. Fitting instructions if you are not sure how to fit these, but please read anyway. (EXTREAMLY IMPORTANT) DO NOT cut a hole in your seatbelt it WILL weaken it and make it more likely to fail when you need it most. Rather, poke a SMALL hole through the centre of the seatbelt at the required height using something with a sharp point, like a thick needle to spread the fibers apart WITHOUT cutting them, only enough to make a SMALL hole, make sure the seatbelt buckle is above the hole (Hint: press the stud through so that the flat side of the seatbelt stopper faces toward the inside of the car and the nipple faces the outside) and then push the stud with the nipple on it through the webbing making sure the fibres of the seatbelt go around the nipple. This can be quite difficult but only make the hole just big enough to allow the nipple to squeeze through, I cannot stress this enough, DO NOT be tempted to cut the fibres to make the hole bigger. Take the backing plate (the one with the hole in it) and place it over the nipple and press hard, this takes considerable force, DO NOT use pliers', if necessary use two small pieces of wood or something similar that isn't going to damage the seatbelt or the stopper to allow you to press it closed, you will feel and hear? it click closed, job done, sit back and admire your handiwork it should look very OEM. REMEMBER THE SEATBELT IS THERE TO SAVE YOUR LIFE SO DO NOT DAMAGE IT.
A reviewer_image
1 year ago
Verified
VehicleClips is a first class company with exemplary service and products. I have purchased a number of fittings for a Range Rover L322 and new VW Beetle. The website is very intuitive to use especially if you have an idea of the parts outline dimensions or a manufacturer part number. The items always arrive very quickly (almost before you've thought to order the part!) and for the high quality are very inexpensive. When I need replacement fixings VehicleClips is always the first company I go to.
A reviewer_image
2 years ago
Verified
VehicleClip's provide a fantastic service and excellent products. The website is easy to use and has very useful dimensional specifications which I used to compare and select the fixings required. This review is for the first purchase, followed by a second for another fastener and in both cases the products were perfect. The items were very competitively priced and postage was free, packages arriving within 24-48hrs of ordering, brilliant!
A reviewer_image
2 years ago
Verified
I placed my order with VehicleClips, despite receiving slightly cheaper offers from elsewhere, because the company provided fully dimensioned sketches of each of its products that enabled me to place my order confident in the knowledge that I had chosen the correct clips. An emailed confirmation order was received within seconds with a follow-up confirmation of dispatch, (complete with a tracking reference), issued on the first working day following my order. The clips were despatched using Royal Mail's standard service and arrived two days later. They were easy to install and fitted perfectly. Thank you, VehicleClips. I couldn't have wished for better service.
A reviewer_image
2 years ago
Verified
I needed to replace some clips in my elderly Ford C Max, which had disintegrated whilst removing an internal panel. From my vague description, Richard searched , not only Ford parts, but other manufacturers, to identify those I needed. Without doubt this company, and its employees represent the very best of British businesses, for service, communication, and speedy delivery. Absolutely amazing in this day and age
A reviewer_image
2 years ago
Verified
Excellent service. Very reasonable price and the clips were dispatched delivered very quickly.. I’ll be using VehicleClips again. My only extremely minor criticism is I needed these clips for a Subaru but couldn’t find them listed. I did a search using the dimensions of the broken clips I had and found them that way but they were listed as being for a Mitsubishi. This is nit picking though. Overall couldn’t fault the price and service.