Passer au contenu

Pare-chocs à œillet d'angle d'aile - Honda 90107-SX0-003

UGS : FCP-0465-HO1

• Pièce équivalente OE de haute qualité

• Solution bon marché pour les pare-chocs mal alignés

• Disponible en vrac ou en gros

Prix d'origine £0
Prix d'origine £4.59 - Prix d'origine £12.09
Prix d'origine
Prix actuel £4.59
£4.59 - £12.09
Prix actuel £4.59
Titre: Paquet de 10
Ces petits œillets noirs sont montés dans l'aile et utilisés avec une vis pour aligner et fixer le coin du pare-chocs. Ils sont utilisés sur un certain nombre de véhicules Honda différents. Ces pièces en plastique deviennent souvent cassantes avec le temps ou peuvent se casser si le coin du véhicule est heurté ou endommagé. Ils devront souvent être remplacés si le pare-chocs est retiré, réparé ou réaligné.

Numéro de pièce Honda : 90107SX0003

Taille du trou : 7,5 x 11,2 mm

Couleur : Noir

Pare-chocs avant et attache de garniture

Tu pourrais aussi aimer

Honda 71144-SR3-A00 - Écrou à œillet en plastique pour fixation de pare-chocs à aile

Prix d'origine £4.79 - Prix d'origine £13.99
Prix d'origine
£4.79 - £13.99
£4.79 - £13.99
Prix actuel £4.79

Il s'agit d'un œillet à vis en plastique blanc qui est normalement utilisé pour relier les coins du pare-chocs aux ailes. Vu en blanc ou en noir, l...

Afficher tous les détails
Prix d'origine £4.79 - Prix d'origine £13.99
Prix d'origine
£4.79 - £13.99
£4.79 - £13.99
Prix actuel £4.79

Clip à œillet à vis en plastique Honda pour montage d'aile, de passage de roue et de pare-chocs 90107-S10-003

Prix d'origine £4.69 - Prix d'origine £12.49
Prix d'origine
£4.69 - £12.49
£4.69 - £12.49
Prix actuel £4.69

Ces clips sont utilisés sur certains modèles Honda, normalement pour fixer le coin du pare-chocs à l'aile. Il s'agit d'un simple œillet à vis qui p...

Afficher tous les détails
Prix d'origine £4.69 - Prix d'origine £12.49
Prix d'origine
£4.69 - £12.49
£4.69 - £12.49
Prix actuel £4.69

Œillet en plastique pour le montage du coin du pare-chocs sur l'aile - Toyota 52535-50060

Prix d'origine £4.59 - Prix d'origine £12.29
Prix d'origine
£4.59 - £12.29
£4.59 - £12.29
Prix actuel £4.59

Ces œillets en plastique sont utilisés sur un certain nombre de voitures Lexus et Toyota pour fixer les coins du pare-chocs avant aux ailes. L'œill...

Afficher tous les détails
Prix d'origine £4.59 - Prix d'origine £12.29
Prix d'origine
£4.59 - £12.29
£4.59 - £12.29
Prix actuel £4.59

Œillet à vis en plastique, Honda 90676-SA7-003

Prix d'origine £4.59 - Prix d'origine £11.69
Prix d'origine
£4.59 - £11.69
£4.59 - £11.69
Prix actuel £4.59

Un passe-fil standard utilisé sur une très large gamme de véhicules Honda. Les œillets sont utilisés partout dans le véhicule, des panneaux intérie...

Afficher tous les détails
Prix d'origine £4.59 - Prix d'origine £11.69
Prix d'origine
£4.59 - £11.69
£4.59 - £11.69
Prix actuel £4.59

Passe-fil en plastique avec joint, Honda 90670-SG0-003

Prix d'origine £4.59 - Prix d'origine £12.19
Prix d'origine
£4.59 - £12.19
£4.59 - £12.19
Prix actuel £4.59

Un œillet à vis en plastique standard utilisé pour le montage des panneaux de carrosserie, des panneaux de garniture et des pièces sur la carrosse...

Afficher tous les détails
Prix d'origine £4.59 - Prix d'origine £12.19
Prix d'origine
£4.59 - £12.19
£4.59 - £12.19
Prix actuel £4.59
vehicleclips.co.uk
4.9
782 reviews on
Cliff_image
1 year ago
Verified
Very good the item arrived quicker than I expected. I only bought a pair of seatbelt stoppers, fitted one and it looks very OEM. Fitting instructions if you are not sure how to fit these, but please read anyway. (EXTREAMLY IMPORTANT) DO NOT cut a hole in your seatbelt it WILL weaken it and make it more likely to fail when you need it most. Rather, poke a SMALL hole through the centre of the seatbelt at the required height using something with a sharp point, like a thick needle to spread the fibers apart WITHOUT cutting them, only enough to make a SMALL hole, make sure the seatbelt buckle is above the hole (Hint: press the stud through so that the flat side of the seatbelt stopper faces toward the inside of the car and the nipple faces the outside) and then push the stud with the nipple on it through the webbing making sure the fibres of the seatbelt go around the nipple. This can be quite difficult but only make the hole just big enough to allow the nipple to squeeze through, I cannot stress this enough, DO NOT be tempted to cut the fibres to make the hole bigger. Take the backing plate (the one with the hole in it) and place it over the nipple and press hard, this takes considerable force, DO NOT use pliers', if necessary use two small pieces of wood or something similar that isn't going to damage the seatbelt or the stopper to allow you to press it closed, you will feel and hear? it click closed, job done, sit back and admire your handiwork it should look very OEM. REMEMBER THE SEATBELT IS THERE TO SAVE YOUR LIFE SO DO NOT DAMAGE IT.
Show more
A reviewer_image
1 year ago
Verified
VehicleClips is a first class company with exemplary service and products. I have purchased a number of fittings for a Range Rover L322 and new VW Beetle. The website is very intuitive to use especially if you have an idea of the parts outline dimensions or a manufacturer part number. The items always arrive very quickly (almost before you've thought to order the part!) and for the high quality are very inexpensive. When I need replacement fixings VehicleClips is always the first company I go to.
Show more
A reviewer_image
2 years ago
Verified
VehicleClip's provide a fantastic service and excellent products. The website is easy to use and has very useful dimensional specifications which I used to compare and select the fixings required. This review is for the first purchase, followed by a second for another fastener and in both cases the products were perfect. The items were very competitively priced and postage was free, packages arriving within 24-48hrs of ordering, brilliant!
Show more
A reviewer_image
2 years ago
Verified
I placed my order with VehicleClips, despite receiving slightly cheaper offers from elsewhere, because the company provided fully dimensioned sketches of each of its products that enabled me to place my order confident in the knowledge that I had chosen the correct clips. An emailed confirmation order was received within seconds with a follow-up confirmation of dispatch, (complete with a tracking reference), issued on the first working day following my order. The clips were despatched using Royal Mail's standard service and arrived two days later. They were easy to install and fitted perfectly. Thank you, VehicleClips. I couldn't have wished for better service.
Show more
A reviewer_image
2 years ago
Verified
I needed to replace some clips in my elderly Ford C Max, which had disintegrated whilst removing an internal panel. From my vague description, Richard searched , not only Ford parts, but other manufacturers, to identify those I needed. Without doubt this company, and its employees represent the very best of British businesses, for service, communication, and speedy delivery. Absolutely amazing in this day and age
Show more
A reviewer_image
2 years ago
Verified
Excellent service. Very reasonable price and the clips were dispatched delivered very quickly.. I’ll be using VehicleClips again. My only extremely minor criticism is I needed these clips for a Subaru but couldn’t find them listed. I did a search using the dimensions of the broken clips I had and found them that way but they were listed as being for a Mitsubishi. This is nit picking though. Overall couldn’t fault the price and service.
Show more