Passer au contenu

Rivet en plastique de 8 mm pour passages de roue Ford, pare-chocs, jupes latérales, etc.-1429935

UGS : FCP-0248-FO1

• Utilisé dans toute la gamme Ford

• Tous les clips sont disponibles en vrac

• Pièces de haute qualité

Prix d'origine £0
Prix d'origine £4.69 - Prix d'origine £12.99
Prix d'origine
Prix actuel £4.69
£4.69 - £12.99
Prix actuel £4.69
Titre: Paquet de 10
Ces clips sont largement utilisés par Ford dans sa gamme de voitures et de camionnettes. Ils sont utilisés sur les garnitures intérieures et extérieures. Certains véhicules les utilisent pour les cartes de porte, mais ils sont le plus souvent utilisés pour les pare-chocs, les jupes latérales et les garnitures de passage de roue. Ils sont également utilisés pour les clips d'isolation de capot sur le dernier modèle Transit (2014-).

Numéro de pièce Ford : 1429935

Taille du trou : 8 mm

Couleur : Noir

Carte de porte avant, jupe latérale, garniture de protection de moulure de seuil, doublure et garde-boue de passage de roue avant, encadrement de radiateur et panneau de guidage d'air, évasement de passage de roue avant et moulure de garniture, pare-chocs avant et fixation de garniture, isolation et insonorisation du capot, pare-chocs arrière et fixation de garniture , boucliers de soubassement et attache de panneau isolant

Tu pourrais aussi aimer

Passe-fil de montage à vis avec joint en caoutchouc, Ford 1713475

Prix d'origine £4.79 - Prix d'origine £13.69
Prix d'origine
£4.79 - £13.69
£4.79 - £13.69
Prix actuel £4.79

Ces œillets de montage à vis s'insèrent dans un trou carré de la carrosserie. Chaque clip comprend un joint en caoutchouc intégré. Ils sont général...

Afficher tous les détails
Prix d'origine £4.79 - Prix d'origine £13.69
Prix d'origine
£4.79 - £13.69
£4.79 - £13.69
Prix actuel £4.79

Rivet de clip de garniture en plastique pour pare-chocs, seuils et autres garnitures - Volvo 9133417

Prix d'origine £4.59 - Prix d'origine £12.29
Prix d'origine
£4.59 - £12.29
£4.59 - £12.29
Prix actuel £4.59

Ce rivet automobile en plastique est extrêmement courant dans toute la gamme Volvo. Le clip est utilisé à des fins très diverses, notamment pour le...

Afficher tous les détails
Prix d'origine £4.59 - Prix d'origine £12.29
Prix d'origine
£4.59 - £12.29
£4.59 - £12.29
Prix actuel £4.59

Clips de pare-chocs et de doublure d'arche pour Ford-1039463, 4663587

Prix d'origine £4.69 - Prix d'origine £13.29
Prix d'origine
£4.69 - £13.29
£4.69 - £13.29
Prix actuel £4.69

Largement utilisé par Ford pour les garnitures de passage de roue et les pare-chocs, il s'agit d'un solide rivet en plastique de 8 mm. La goupille ...

Afficher tous les détails
Prix d'origine £4.69 - Prix d'origine £13.29
Prix d'origine
£4.69 - £13.29
£4.69 - £13.29
Prix actuel £4.69

Garniture de passage de roue, pare-éclaboussures, pare-chocs et clips de jupe latérale - Mini 07130702966

Prix d'origine £4.69 - Prix d'origine £13.39
Prix d'origine
£4.69 - £13.39
£4.69 - £13.39
Prix actuel £4.69

Utilisées sur plusieurs modèles de voitures Mini, ces vis en plastique pour fixer les clips sont utilisées sur les grands panneaux de garniture tel...

Afficher tous les détails
Prix d'origine £4.69 - Prix d'origine £13.39
Prix d'origine
£4.69 - £13.39
£4.69 - £13.39
Prix actuel £4.69

Vis à tête Torx avec rondelle, Ford 1449533

Prix d'origine £4.59 - Prix d'origine £12.99
Prix d'origine
£4.59 - £12.99
£4.59 - £12.99
Prix actuel £4.59

Ces vis à tête Torx sont utilisées pour fixer une gamme de pièces sur les véhicules Ford modernes. Ils sont courants sur les sous-couches de moteur...

Afficher tous les détails
Prix d'origine £4.59 - Prix d'origine £12.99
Prix d'origine
£4.59 - £12.99
£4.59 - £12.99
Prix actuel £4.59
vehicleclips.co.uk
4.9
757 reviews on
Cliff_image
1 year ago
Verified
Very good the item arrived quicker than I expected. I only bought a pair of seatbelt stoppers, fitted one and it looks very OEM. Fitting instructions if you are not sure how to fit these, but please read anyway. (EXTREAMLY IMPORTANT) DO NOT cut a hole in your seatbelt it WILL weaken it and make it more likely to fail when you need it most. Rather, poke a SMALL hole through the centre of the seatbelt at the required height using something with a sharp point, like a thick needle to spread the fibers apart WITHOUT cutting them, only enough to make a SMALL hole, make sure the seatbelt buckle is above the hole (Hint: press the stud through so that the flat side of the seatbelt stopper faces toward the inside of the car and the nipple faces the outside) and then push the stud with the nipple on it through the webbing making sure the fibres of the seatbelt go around the nipple. This can be quite difficult but only make the hole just big enough to allow the nipple to squeeze through, I cannot stress this enough, DO NOT be tempted to cut the fibres to make the hole bigger. Take the backing plate (the one with the hole in it) and place it over the nipple and press hard, this takes considerable force, DO NOT use pliers', if necessary use two small pieces of wood or something similar that isn't going to damage the seatbelt or the stopper to allow you to press it closed, you will feel and hear? it click closed, job done, sit back and admire your handiwork it should look very OEM. REMEMBER THE SEATBELT IS THERE TO SAVE YOUR LIFE SO DO NOT DAMAGE IT.
Show more
A reviewer_image
1 year ago
Verified
VehicleClips is a first class company with exemplary service and products. I have purchased a number of fittings for a Range Rover L322 and new VW Beetle. The website is very intuitive to use especially if you have an idea of the parts outline dimensions or a manufacturer part number. The items always arrive very quickly (almost before you've thought to order the part!) and for the high quality are very inexpensive. When I need replacement fixings VehicleClips is always the first company I go to.
Show more
A reviewer_image
2 years ago
Verified
VehicleClip's provide a fantastic service and excellent products. The website is easy to use and has very useful dimensional specifications which I used to compare and select the fixings required. This review is for the first purchase, followed by a second for another fastener and in both cases the products were perfect. The items were very competitively priced and postage was free, packages arriving within 24-48hrs of ordering, brilliant!
Show more
A reviewer_image
2 years ago
Verified
I placed my order with VehicleClips, despite receiving slightly cheaper offers from elsewhere, because the company provided fully dimensioned sketches of each of its products that enabled me to place my order confident in the knowledge that I had chosen the correct clips. An emailed confirmation order was received within seconds with a follow-up confirmation of dispatch, (complete with a tracking reference), issued on the first working day following my order. The clips were despatched using Royal Mail's standard service and arrived two days later. They were easy to install and fitted perfectly. Thank you, VehicleClips. I couldn't have wished for better service.
Show more
A reviewer_image
2 years ago
Verified
I needed to replace some clips in my elderly Ford C Max, which had disintegrated whilst removing an internal panel. From my vague description, Richard searched , not only Ford parts, but other manufacturers, to identify those I needed. Without doubt this company, and its employees represent the very best of British businesses, for service, communication, and speedy delivery. Absolutely amazing in this day and age
Show more
A reviewer_image
2 years ago
Verified
Excellent service. Very reasonable price and the clips were dispatched delivered very quickly.. I’ll be using VehicleClips again. My only extremely minor criticism is I needed these clips for a Subaru but couldn’t find them listed. I did a search using the dimensions of the broken clips I had and found them that way but they were listed as being for a Mitsubishi. This is nit picking though. Overall couldn’t fault the price and service.
Show more