Zu Inhalt springen

Mazda Motorhauben-Isolierungs- und Schallschutzclips, Mazda TD1156694

Artikelnummer: FCP-0898-MA1

• Sehr häufig bei modernen Mazda-Fahrzeugen

• Hochwertige Aftermarket-Teile

Ursprünglicher Preis £0
Ursprünglicher Preis £4.59 - Ursprünglicher Preis £12.09
Ursprünglicher Preis
Aktueller Preis £4.59
£4.59 - £12.09
Aktueller Preis £4.59
Titel: 10 Stück
Diese Tannenbaumklammern werden seit etwa 2003 bei den meisten Mazda-Fahrzeugen zur Befestigung der Schalldämmung unter der Motorhaube verwendet. Die Klammern passen in ein 5,5-mm-Loch an der Unterseite der Motorhaube. Dieser Clip wird bei Fahrzeugen wie MX-5 (ab 2005), Mazda 3, CX-3, CX-5 und RX-8 verwendet.

Mazda-Teilenummer: TD1156694

Lochgröße: 5,5 mm

Farbe: Schwarz

Motorhaubenisolierung und Schalldämmung

Sie können auch mögen

Innentürkarten- und Verkleidungsclips, Mazda GJ6R68ABX / GJ6A68AB1

Ursprünglicher Preis £4.59 - Ursprünglicher Preis £12.39
Ursprünglicher Preis
£4.59 - £12.39
£4.59 - £12.39
Aktueller Preis £4.59

Diese Innentürkarten-Clips werden bei einer Vielzahl von Mazda-Fahrzeugen verwendet, um die Innentürkarten an Ort und Stelle zu halten. Unsere Clip...

Vollständige Details anzeigen
Ursprünglicher Preis £4.59 - Ursprünglicher Preis £12.39
Ursprünglicher Preis
£4.59 - £12.39
£4.59 - £12.39
Aktueller Preis £4.59

Befestigungsclip für Motorhaubenisolierung/Schalldämmung, Ford 1251866

Ursprünglicher Preis £5.09 - Ursprünglicher Preis £16.69
Ursprünglicher Preis
£5.09 - £16.69
£5.09 - £16.69
Aktueller Preis £5.09

Mit diesen Befestigungselementen wird die gepolsterte Schalldämmung an der Unterseite der Motorhaube befestigt. Die Clips werden zusammengedrückt, ...

Vollständige Details anzeigen
Ursprünglicher Preis £5.09 - Ursprünglicher Preis £16.69
Ursprünglicher Preis
£5.09 - £16.69
£5.09 - £16.69
Aktueller Preis £5.09

Screw Grommet Lock Nut, Door Cards & Trim, Mazda GJ6A58975

Ursprünglicher Preis £4.89 - Ursprünglicher Preis £14.59
Ursprünglicher Preis
£4.89 - £14.59
£4.89 - £14.59
Aktueller Preis £4.89

These plastic screw grommets fit into a 10mm square hole. They are often used by Mazda for door cards and other interior trim panels.

Ursprünglicher Preis £4.89 - Ursprünglicher Preis £14.59
Ursprünglicher Preis
£4.89 - £14.59
£4.89 - £14.59
Aktueller Preis £4.89

Skoda-Motorhauben-Isolierungs-Kunststoffklammern – Halterungen für Motorhauben-Schalldämpfer

Ursprünglicher Preis £4.69 - Ursprünglicher Preis £13.39
Ursprünglicher Preis
£4.69 - £13.39
£4.69 - £13.39
Aktueller Preis £4.69

Dieser gefederte Clip ist sehr einfach. Der Clip lässt sich zum Anbringen zusammendrücken und dehnt sich aus, sobald er angebracht ist. Es wird bei...

Vollständige Details anzeigen
Ursprünglicher Preis £4.69 - Ursprünglicher Preis £13.39
Ursprünglicher Preis
£4.69 - £13.39
£4.69 - £13.39
Aktueller Preis £4.69

8-mm-Push-Fit-Kunststoffniete, Mazda BGV4-56-145

Ursprünglicher Preis £4.79 - Ursprünglicher Preis £13.89
Ursprünglicher Preis
£4.79 - £13.89
£4.79 - £13.89
Aktueller Preis £4.79

Dieser im gesamten Mazda-Sortiment weit verbreitete Clip wird zum Befestigen und Sichern einer Vielzahl von Teilen verwendet. Zu den Einsatzmöglich...

Vollständige Details anzeigen
Ursprünglicher Preis £4.79 - Ursprünglicher Preis £13.89
Ursprünglicher Preis
£4.79 - £13.89
£4.79 - £13.89
Aktueller Preis £4.79
vehicleclips.co.uk
4.9
752 reviews on
Cliff_image
1 year ago
Verified
Very good the item arrived quicker than I expected. I only bought a pair of seatbelt stoppers, fitted one and it looks very OEM. Fitting instructions if you are not sure how to fit these, but please read anyway. (EXTREAMLY IMPORTANT) DO NOT cut a hole in your seatbelt it WILL weaken it and make it more likely to fail when you need it most. Rather, poke a SMALL hole through the centre of the seatbelt at the required height using something with a sharp point, like a thick needle to spread the fibers apart WITHOUT cutting them, only enough to make a SMALL hole, make sure the seatbelt buckle is above the hole (Hint: press the stud through so that the flat side of the seatbelt stopper faces toward the inside of the car and the nipple faces the outside) and then push the stud with the nipple on it through the webbing making sure the fibres of the seatbelt go around the nipple. This can be quite difficult but only make the hole just big enough to allow the nipple to squeeze through, I cannot stress this enough, DO NOT be tempted to cut the fibres to make the hole bigger. Take the backing plate (the one with the hole in it) and place it over the nipple and press hard, this takes considerable force, DO NOT use pliers', if necessary use two small pieces of wood or something similar that isn't going to damage the seatbelt or the stopper to allow you to press it closed, you will feel and hear? it click closed, job done, sit back and admire your handiwork it should look very OEM. REMEMBER THE SEATBELT IS THERE TO SAVE YOUR LIFE SO DO NOT DAMAGE IT.
Show more
A reviewer_image
1 year ago
Verified
VehicleClips is a first class company with exemplary service and products. I have purchased a number of fittings for a Range Rover L322 and new VW Beetle. The website is very intuitive to use especially if you have an idea of the parts outline dimensions or a manufacturer part number. The items always arrive very quickly (almost before you've thought to order the part!) and for the high quality are very inexpensive. When I need replacement fixings VehicleClips is always the first company I go to.
Show more
A reviewer_image
2 years ago
Verified
VehicleClip's provide a fantastic service and excellent products. The website is easy to use and has very useful dimensional specifications which I used to compare and select the fixings required. This review is for the first purchase, followed by a second for another fastener and in both cases the products were perfect. The items were very competitively priced and postage was free, packages arriving within 24-48hrs of ordering, brilliant!
Show more
A reviewer_image
2 years ago
Verified
I placed my order with VehicleClips, despite receiving slightly cheaper offers from elsewhere, because the company provided fully dimensioned sketches of each of its products that enabled me to place my order confident in the knowledge that I had chosen the correct clips. An emailed confirmation order was received within seconds with a follow-up confirmation of dispatch, (complete with a tracking reference), issued on the first working day following my order. The clips were despatched using Royal Mail's standard service and arrived two days later. They were easy to install and fitted perfectly. Thank you, VehicleClips. I couldn't have wished for better service.
Show more
A reviewer_image
2 years ago
Verified
I needed to replace some clips in my elderly Ford C Max, which had disintegrated whilst removing an internal panel. From my vague description, Richard searched , not only Ford parts, but other manufacturers, to identify those I needed. Without doubt this company, and its employees represent the very best of British businesses, for service, communication, and speedy delivery. Absolutely amazing in this day and age
Show more
A reviewer_image
2 years ago
Verified
Excellent service. Very reasonable price and the clips were dispatched delivered very quickly.. I’ll be using VehicleClips again. My only extremely minor criticism is I needed these clips for a Subaru but couldn’t find them listed. I did a search using the dimensions of the broken clips I had and found them that way but they were listed as being for a Mitsubishi. This is nit picking though. Overall couldn’t fault the price and service.
Show more